Manual de instrucciones de Fisher & Paykel MR850

Resumen del contenido incluido en la página 1

SPECIFICATIONS
WARNING
Dimensions: 140 mm x 173 mm x 135 mm (without chamber fitted)
Ensure that invasive mode is set for patients
Weight: 2.8 kg (no chamber fitted), 3.1 kg (chamber fitted and filled with water)
that have bypassed airways.
Supply Frequency: 50/60 Hz Supply Voltage: 115 V~ Supply Current: 2.0 A max at 115 V~
Heater Plate: 150 W Heater Wire: 22 V~, 2.73 A, 60 W, 50/60 Hz
The use of breathing circuits, chambers or
Heater Plate Over-temperature Cutout: 118 ± 6 °C
other a

Resumen del contenido incluido en la página 2

SET UP Slide humidification chamber (A) onto humidifier base and connect breathing circuit (B) (refer to humidification chamber and breathing 1. circuit operating instructions for further details). Connect the temperature probe plug (C) (REF 900MR86X) to the blue socket on the humidifier base until an audible click is heard. 2. Push the chamber probe (D) and airway probe (E) into the breathing circuit. Make sure the chamber probe is correctly located in its key-way 3. and that both pr

Resumen del contenido incluido en la página 3

NON-HEATED BREATHING CIRCUITS SET UP Slide humidification chamber (a) onto humidifier base and 1. connect breathing circuit (b) (refer to humidification chamber and breathing circuit operating instructions for further details). Connect the temperature probe plug (c) (REF 900MR86X) to the 2. blue socket on the humidifier base until an audible click is heard. Push the chamber probe (d) and airway probe (e) into the (e) 3. (d) (a) breathing circuit. Make sure the chamber probe is corre