Manual de instrucciones de Dacor DH3606S

Resumen del contenido incluido en la página 1

DH
Document # PG07-007 Revised 07/03/13 Page 1/2
Distinctive™ 30 and 36” Wide PLANNING
Wall Mount Range Hoods GUIDE
All tolerances: ±1/16” (±1.6 mm), unless otherwise stated
warning
11 7/8 ”
• Observe all governing codes and ordinances during planning
(30.2 cm)

and installation. Contact your local building department for
A
further information.
• This appliance must be installed in accordance with the
accompanying installation instructions.
6”
(15.2 cm)
C
23 5/8”
(60.0 cm)
Model Dimens

Resumen del contenido incluido en la página 2

DH Document # PG07-007 Revised 07/03/13 Page 2/2 Distinctive 30 and 36” Wide PLANNING Wall Mount Range Hood GUIDE Planning the Duct w ork Calculating the Maximum Duct r un Length The maximum straight duct length for the hood is determined by the type of ■ For optimal performance, consult a qualified HVAC specialist when designing the duct system. duct used. See the chart below. ■ All duct work materials (including screws and duct tape) must be Maximum Straight purchased separately by the