Resumen del contenido incluido en la página 1
Convection Oven
Electric
Model:
ASC-2E
ASC-4E
ASC-2E
with
Mobile Stand Option 5004687
Manual
Control
• INSTALLATION
• OPERATION
• MAINTENANCE
ASC-4E
with
Stand Option 5003489
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA
PHONE: 262.251.3800 • 800.558.8744 USA/CANADA FAX: 262.251.7067 • 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
p r i n t e d i n u . s . a . MN-28666 • 03/12
Resumen del contenido incluido en la página 2
Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Care and Cleaning Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Cleaning and Preventative Maintenance . . . . . . 14 Safety Procedures and Precautions . . . . . . . . . . . . . 2 Protecting Stainless Steel Surfaces . . . . . . . . . 14 Cleaning Agents . . . . . . . . . . . . . . . . . . . . . . . . 14 Installation Cleaning Materials . . . . . . . . . . . . . . . . . . . . . . 14 Site In
Resumen del contenido incluido en la página 3
® DELIVERY UNPACKING 1. Carefully remove the This Alto-Shaam appliance has been appliance from the thoroughly tested and inspected to ensure only carton or crate. the highest quality unit is provided. Upon receipt, check for any possible shipping damage NOTE: Do not discard the and report it at once to the delivering carrier. carton and other See Transportation Damage and Claims section packaging material located in this manual. until you have This appliance, complete with una
Resumen del contenido incluido en la página 4
SAFETY PROCEDURES AND PRECAUTIONS Knowledge of proper procedures is essential to the 1. This appliance is intended to cook, hold safe operation of electrically and/or gas energized or process foods for the purpose of human equipment. In accordance with generally accepted consumption. No other use for this appliance is product safety labeling guidelines for potential authorized or recommended. hazards, the following signal words and symbols 2. This appliance is intended for use in comme
Resumen del contenido incluido en la página 5
INSTALLATION DANGER CAUTION METAL PARTS OF THIS EQUIPMENT IMPROPER INSTALLATION, BECOME EXTREMELY HOT WHEN ALTERATION, ADJUSTMENT, IN OPERATION. TO AVOID BURNS, SERVICE, OR MAINTENANCE COULD ALWAYS USE HAND PROTECTION RESULT IN SEVERE INJURY, DEATH, WHEN OPERATING THIS APPLIANCE. OR CAUSE PROPERTY DAMAGE. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY DANGER BEFORE INSTALLING OR SERVICING DO NOT store or use gasoline or other THIS EQUIPMENT. fl ammable vap
Resumen del contenido incluido en la página 6
INSTALLATION EXTERIOR DIMENSIONS ASC-4E INTENDED FOR ASC-2E 3107173 INTENDED FOR 3107173 OTHER THAN OTHER THAN HOUSEHOLD USE. HOUSEHOLD USE. Destiné à un usage Destiné à un usage autre que domestique. autre que domestique. 8" (203mm) 4-11/16" CAVITY VENT Ne pas installer à MINIMUM 6 INCH FOR USE ONLY ON 3-1/4" Ne pas installer à MINIMUM 6 INCH FOR USE ONLY ON une distance inférirure (119mm) CLEARANCES FROM NON-COMBUSTIBLE une distance inférirure (83mm) à celle indiquée CLEARANCES FROM NON-COM
Resumen del contenido incluido en la página 7
INSTALLATION INSTALLATION REQUIREMENTS The oven must be mounted on the factory equipped oven legs or on an optional oven stand. Installation CAUTION on a solid or concrete base that in any way restricts air flow may void the warranty. TO PREVENT PERSONAL INJURY, All clearances for a proper ventilation air supply USE CAUTION WHEN MOVING OR must be maintained to minimize fire hazard. Do not LEVELING THIS APPLIANCE. locate the oven immediately adjacent to any other heat-generating applia
Resumen del contenido incluido en la página 8
INSTALLATION ELECTRICAL CONNECTION DANGER DANGER ELECTRICAL CONNECTIONS MUST ENSURE POWER SOURCE BE MADE BY A QUALIFIED SERVICE MATCHES VOLTAGE STAMPED TECHNICIAN IN ACCORDANCE WITH ON APPLIANCE NAMEPLATE. APPLICABLE ELECTRICAL CODES. The oven must be installed by a qualified electrician. Wire size for the main incoming power to the This appliance must be branch circuit protected unit must match the minimum size listed in the with proper ampacities, in accordance with the specificat
Resumen del contenido incluido en la página 9
INSTALLATION STACKING & VENTING ASSEMBLY (2-ASC-2E/STK S H O W N) Note: Actual unit may be different than shown . CAUTION TO PREVENT PERSONAL INJURY, USE CAUTION WHEN MOVING OR LEVELING THIS APPLIANCE. Part numbers and drawings are subject to change without notice . ASC-2E & ASC-4E Electric Convection Ovens - Manual Control • 7
Resumen del contenido incluido en la página 10
INSTALLATION STACKING & VENTING ASSEMBLY (2-ASC-4E/STK 208/240V S H O W N) ITEM DESCRIPTION PART NO. QTY Note: Actual unit may be 2 RISER, FLUE ELECTRIC 1004984 1 different than shown . 3 SCREW, #10 SMS .5LG SC-26520 5 After legs or casters have been installed on the bottom oven, place the upper oven on top of lower unit . Align . Remove top elbow vent prior to installing riser . 2 3 Assemble venting components 2 & 3 as shown CAUTION TO PREVENT PERSONAL INJURY, USE CAUTION WHEN MOVING
Resumen del contenido incluido en la página 11
INSTALLATION OVEN STAND ASSEMBLY OVEN STAND 5003489 SHOWN 6 2 4 1 2 9 2 5 1 8 1 7 3 38" (956mm) ITEM DESCRIPTION PART NO. QTY 1 LEG SUPPORT ASSEMBLY 5003488 2 2 CHANNEL, SUPPORT 1004459 2 3 LEG LG-22185 4 *CASTERS, RIGID CS-25674 2 *CASTERS, SWIVEL W/BRAKE CS-25675 2 4 BRACKET, STAND 1004461 1 5 BRACKET, ATTACHMENT 1004369 2 6 CHANNEL, BACK 1004460 1 7 SHELF, STAND 1004466 1 8 RACK, OVEN SUPPORT SR-26551 2 9 OVEN RACK SH-26795 6 10 *SCREWS, 1/4-20 X 1/2 HEX HEAD SC-22729 27 11 *NUT, 1/4-20 NYLON
Resumen del contenido incluido en la página 12
OPERATING INSTRUCTIONS USER SAFETY INFORMATION START-UP OPERATION IN THE EVENT OF A POWER FAILURE: • TURN ALL SWITCHES OFF. CAUTION • WAIT UNTIL POWER IS RESTORED BEFORE METAL PARTS OF THIS EQUIPMENT ATTEMPTING TO OPERATE THE OVEN. BECOME EXTREMELY HOT WHEN NOTE: If such an event has occurred, it is strongly IN OPERATION. TO AVOID BURNS, recommended that you ensure the food in ALWAYS USE HAND PROTECTION the oven is safe for consumption according WHEN OPERATING THIS APPLIANCE. to lo
Resumen del contenido incluido en la página 13
OPERATING INSTRUCTIONS POSITION 1. The best arrangement for broiling, baking PAN/SHELF POSITIONS FOR ASC-2E: 2 cookies and for other baked goods under The oven includes 5 chrome plated wire 4 2-1/2" (65mm) in height. This arrangement shelves with two removable side racks and 6 can also be used as the maximum capacity for 8 9 shelf positions spaced at 1-5/8" (41mm). reconstituting frozen entrées. POSITION 2. General baking with the use of sheet pans 1 for products under 3-1/2" (89mm) in h
Resumen del contenido incluido en la página 14
OPERATING INSTRUCTIONS MANUAL CONTROL OPERATION 1. Press POWER SWITCH A to the ON position. 2. Press FAN SWITCH B to high or low fan speed. 3. Set COOK TEMPERATURE THERMOSTAT D to the temperature desired. When this temperature is reached, LIGHT OFF\OVEN READY indicator light E will go out. a ALLOW A MINIMUM OF 20 MINUTES TO PREHEAT A COLD OVEN. 4. Load product into the oven. For best results, always load the oven from the bottom to the top position and load as quickly as possible
Resumen del contenido incluido en la página 15
OPERATING INSTRUCTIONS CHEF OPERATING TIPS The Alto-Shaam convection oven will provide the best results and longest possible service with the utilization of the following suggestions and guidelines. NOTE: Moisture will escape around the doors when baking products with a heavy moisture content such as chicken, potatoes, etc. This is a normal operating condition. 1. Thoroughly preheat the oven for approximately 9. To assure even cooking when baking, weigh or 20 minutes before use. measure the
Resumen del contenido incluido en la página 16
S E S S H D R S A E U P P R A L B E CARE AND CLEANING CLEANING AND PREVENTATIVE MAINTENANCE PROTECTING STAINLESS STEEL SURFACES CLEANING AGENTS It is important to guard against corrosion Use non-abrasive cleaning products designed for in the care of stainless steel use on stainless steel surfaces. Cleaning agents surfaces. Harsh, corrosive, must be chloride-free compounds and must not or inappropriate chemicals contain quaternary salts. Never use hydrochloric can completely destroy the
Resumen del contenido incluido en la página 17
CARE AND CLEANING The oven is fabricated with an easy to clean porcelain enamel interior or an optional stainless steel interior. DANGER NOTE: Always allow the oven to cool before DISCONNECT UNIT FROM cleaning. If the oven is hot, allow the POWER SOURCE BEFORE interior surfaces to become cool to the CLEANING OR SERVICING. touch by opening the oven doors and engaging the cool-down function. DO NOT USE ABRASIVE CLEANING COMPOUNDS. Completely avoid the use of abrasive cleaning DAN
Resumen del contenido incluido en la página 18
CARE AND CLEANING MOTOR CARE EXTERIOR: The convection oven motor contains self- To help maintain the protective film coating on lubricating, sealed ball bearings and is polished stainless steel, clean the exterior of the generally maintenance-free. During operation, cabinet with a cleaner recommended for stainless the interior of the motor is cooled by air flowing steel surfaces. Spray the cleaning agent on a clean into the rear of the motor case. This is a general cloth and wipe wi
Resumen del contenido incluido en la página 19
SERVICE FULL ASSEMBLY - ASC-2E 18 17 16 15 1 2 14 13 12 11 4 3 10 5 6 8 7 9 ITEM DESCRIPTION PART NO. QTY ITEM DESCRIPTION PART NO. QTY 1 PANEL, TOP AND SIDE 1005455 1 11 FEET see pg 10 4 2 MOTOR MO-34208 1 12 GASKET top /bottom 1005316 2 3 SWITCH, ON/OFF/COOL DOWN SW-34112 1 side 1005311 2 4 SWITCH, FAN HI/LOW SW-34101 1 13 OVEN RACK SH-26894 5 5 INDICATOR LIGHT LI-3951 1 14 COVER, BOTTOM HINGE 1005458 1 6 KNOB, THERMOSTAT KN-34297 1 15 LATCH LT-26976 2 7 THERMO
Resumen del contenido incluido en la página 20
SERVICE CONTROL ASSEMBLY - ASC-2E 4 3 2 1 5 20 6 19 18 7 8 17 9 16 10 15 11 14 13 12 ITEM DESCRIPTION PART NO. QTY ITEM DESCRIPTION PART NO. QTY 1 HIGH LIMIT BRACKET 1012678 1 11 SWITCH, MOTOR PROTECT SW-33500 1 2 SAFETY, 340°C tt -3750 1 12 CONTACTOR CN-3731 1 3 HEAT ELEMENTS, OUTER 208V e L-34211 1 13 KNOB, TIMER KN-34858 1 240V e L-34210 1 14* TIMER TR-34724 1 4 HEAT ELEMENTS, INNER 208V e L-34212 15 KNOB, THERMOSTAT KN-34297 1 1 240V e L-34209 1 16*
