Resumen del contenido incluido en la página 1
8410.qref.def3 Page 1 Monday, August 17, 1998 9:09 AM
®
DEFINITY Enterprise Communications Server (ECS)
Release 5
8410 Voice Terminal
Quick Reference
555-230-764
Comcode 107672974
Refer to the procedures on this card to use the
features on your 8410 voice terminal. The features
here are listed in alphabetical order. In the spaces
provided, write the feature access codes for your
system. For more information about any of these
features, see your system manager or refer to the
®
DEFINIT
Resumen del contenido incluido en la página 2
8410.qref.def3 Page 2 Monday, August 17, 1998 9:09 AM 4 Dial outside number, extension, or feature access code you want to store (up to 24 digits). 5Press . # 6 Repeat Steps 3 through 5 to program additional buttons. 7 Hang up. To place an AD call Speaker 1 Pick up handset or press . 2 Press selected AD button. To program/reprogram an outside number, extension, or feature access code into a personal list 1 Pick up handset. NOTE: For speakerphone users, press a call appearance button. 2 P
Resumen del contenido incluido en la página 3
8410.qref.def3 Page 3 Monday, August 17, 1998 9:09 AM AUTOMATIC CALLBACK AAUT AUTO OM MA AT TIUT IC CALLBACK OMATIC CALLBACK To automatically place another call to an extension that was busy or did not answer 1 During call attempt, press softkey below AutCB (for display users) or Press AutoCallBk . 2 Hang up. • You hear a 3-burst priority ring when both you and the called extension are idle. Pick up handset to be connected to call. To cancel Automatic Callback 1 While on-hook, press soft
Resumen del contenido incluido en la página 4
8410.qref.def3 Page 4 Monday, August 17, 1998 9:09 AM CALL FORWARDING ALL CALLS To temporarily redirect all calls to an extension or outside number 1 Press softkey below CFrwd (for display users) or Press Call Fwd or Dial Call Forward access code _______. 2 Dial extension or number where calls will be sent. 3 Hang up. To cancel Call Forwarding 1 While on-hook, press softkey below CFrwd (for display users) or Press Call Fwd again or Dial Call Forward cancel code _______. CALL PARK To
Resumen del contenido incluido en la página 5
8410.qref.def3 Page 5 Monday, August 17, 1998 9:09 AM CONFERENCE To add another party to a call (for a total of up to 6 parties) 1Press . Conf 2 Dial number of new party and wait for answer. 3 Press Conf again. 4 Repeat Steps 1 through 3 for additional conference connections. To add a call you have put on hold to another call to which you are connected 1Press . Conf • You are given a new call appearance. 2 Press call appearance of call on hold (first call). 3 Press Conf again. To drop the
Resumen del contenido incluido en la página 6
8410.qref.def3 Page 6 Monday, August 17, 1998 9:09 AM . HOLD To put a call on hold 1Press . Hold To answer a new call while active on another 1Press . Hold 2 Press call appearance of incoming call. To return to held call 1 Press call appearance of held call. LAST NUMBER DIALED To automatically redial the last number you dialed 1 Press softkey below Last (for display users) or Press LastDialed or Dial Last Number Dialed access code _______. LEAVE WORD CALLING (LWC) To leave a message after d
Resumen del contenido incluido en la página 7
8410.qref.def3 Page 7 Monday, August 17, 1998 9:09 AM . RESET SPEAKERPHONE NOTE: You can use this feature only if the Reset Spkr label appears under the Speaker button. To adjust the speakerphone to the surrounding room acoustics Shift 1 While on-hook, press and then press Speaker . • You hear a series of tones. SELECT RING (and RINGER VOLUME) To select a personalized ring Shift Shift 1 If your 8410 has a button, press and Hold then press ; Ring Ring if your 8410 has a button, press
Resumen del contenido incluido en la página 8
8410.qref.def3 Page 8 Monday, August 17, 1998 9:09 AM SEND ALL CALLS To send all calls (except priority calls) to coverage 1 While on-hook, press softkey below SAC (for display users) or Press Send Calls or Dial Send All Calls access code _______. To cancel Send All Calls 1 While on-hook, press softkey below SAC (for display users) or Press Send Calls or Dial Send All Calls cancel code _______. SPEAKERPHONE NOTE: To use this feature, your voice terminal must be set for the Speakerphon
Resumen del contenido incluido en la página 9
8410.qref.def3 Page 9 Monday, August 17, 1998 9:09 AM To end a speakerphone call 1 Press Speaker again to hang up. NOTE: With a DEFINITY G3V3 or later, if the person you are talking with hangs up first, the call will be disconnected. If you press Speaker , you will get dial tone. STORED NUMBER (display feature) To see number stored on an AD button 1 Press the softkey below View (for display users) or Press Stored . 2 Press selected AD button. To see the last number you dialed 1 Press the
Resumen del contenido incluido en la página 10
8410.qref.def3 Page 10 Monday, August 17, 1998 9:09 AM TIMER (display feature) To see elapsed time Menu 1 To start timer, press and the softkey below Timer (for display users) or Press Timer . Menu 2 To stop timer, press and the softkey below Timer or Press Timer again. TRANSFER To send present call to another extension or outside number 1Press . Transfer 2 Dial number where call is to be transferred. 3 Press Transfer again. 4 Hang up. Prepared by Issue 2, February 1997 BCS Product Cop
