Resumen del contenido incluido en la página 1
Operating Instructions
LCD Video Monitor
BT- P
Model No. BT- E
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
D
S0506M0 -H
Printed in Japan
VQT0X79
Resumen del contenido incluido en la página 2
Read this first ! (for BT-LH2600WP) CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: This apparatus can be operated at a
Resumen del contenido incluido en la página 3
Read this first ! (for BT-LH2600WP) (continued) FCC NOTICE (USA) Declaration of Conformity Model Number: BT-LH2600WP Trade Name: PANASONIC Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept
Resumen del contenido incluido en la página 4
Read this first ! (for BT-LH2600WE) Operating precaution Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals. If this should be the case, deal with the situation by, for instance, moving the source of the magnetic fields away from the unit before operation. g THIS EQUIPMENT MUST BE EARTHED WARNING: To ensure safe operation, the three-pin plug • TO REDUCE THE RISK OF FIRE OR SHOCK must be inserted only into a standard three
Resumen del contenido incluido en la página 5
Read this first ! (for BT-LH2600WE) (continued) Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for U.K. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. FOR CONTINENTAL EUROPE, ETC. FOR U.K. ONLY Not to be used in the U.K. FOR U.K. ONLY How to replace the fuse 1.Open the fuse compa
Resumen del contenido incluido en la página 6
Precautions for Use • The liquid crystal portion is manufactured with highly precise technology. It includes over 99.99% effective pixels, but 0.01% or less of the pixels are either missing, or have fixed lighting (red, blue, green). This is not a sign of malfunction. • The liquid crystal protection panel is a specially manufactured component. Wiping it with a hard cloth, or rubbing it vigorously will scratch the surface. • If a still image is displayed for a long time, it may cause tempor
Resumen del contenido incluido en la página 7
Outline The BT-LH2600W liquid crystal monitor was designed especially for broadcasting service and business use. It is equipped with a high performance 26-inch wide liquid crystal display panel. g High performance liquid crystal panel This monitor achieves outstanding color reproduction, a wide viewing angle, and high-speed response. g Immediate image output of input signals *1 Time lag per field caused by IP conversion peculiar to LCD panels is eliminated. The period between input and pict
Resumen del contenido incluido en la página 8
Controls and Their Functions Video monitor unit Front view Tally ( page 26, 30) Front panel ( page 9) Rear view Fan ( page 21) Rear panel ( page 10) Power supply ( page 11) 8
Resumen del contenido incluido en la página 9
Controls and Their Functions (continued) Front panel POWER YPBPR/ MENU ENTER FUNCTION VIDEO Y/C SDI 1 SDI 2 RGB 1 2 3 4 5 INPUT SELECT PHASE CHROMA BRIGHT CONTRAST/ VOLUME BACKLIGHT POWER switch This switches the power supply ON/OFF. When the power is ON, the LED (green) lights up. INPUT SELECT button This selects the signal input line. The green LED light above the button indicates the selected input signal. VIDEO : Video input Y/C : Y/C input SDI1 : Serial digital interface input (HD/SD comp
Resumen del contenido incluido en la página 10
Controls and Their Functions (continued) Rear panel 12 3 4 5 6 78 SDI (HD/SD) terminal (BNC) IN1 : This is the SDI input terminal (compatible with HD/SD automatic switching). IN2 : This is the SDI input terminal (compatible with HD/SD automatic switching). SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on the screen. * SDI active through-out Signal output results only when [SDI1] or [SDI2] is selected in [INPUT SELECT]. No output results when
Resumen del contenido incluido en la página 11
Power Supply Connecting and fixing the power cord (for the U.S.A. and Canada) 1. Attach the power cord to the monitor unit. 2. Connect the power cord to the power outlet. Using the power cord hook and the screw, attach the power cord to the monitor unit. Power cord Power cord hook Screw Connecting and fixing the AC mains lead (for others) 1. Attach the mains lead to the monitor unit. 2. Connect the AC mains lead to the power outlet. Using the AC mains lead hook and the screw, attach the
Resumen del contenido incluido en la página 12
How to Use the On Screen Menu Six types of information are displayed on the screen. The input signal status, picture adjusting knob status, sharpness display, function display, audio level meter display and the menu display. Input signal status 1. The selected input line ( page 9, ) • VIDEO, Y/C, SDI1, SDI2, SDI1 YPBPR/RGB-VIDEO/RGB-COMP. 2. Various display (FILM mode) • Displayed when “FILM” is selected in “GAMMA SELECT”. 3. Signal format • The display status can be set in “STATUS DISPLA
Resumen del contenido incluido en la página 13
How to Use the On Screen Menu (continued) Function display • You can set FUNCTION display in the menu. • When “FUNCTION DISPLAY” ( page 22) is “ON” and either [FUNCTION1] or [FUNCTION5] is pressed, the unit displays the status of the F1:MARKER FUNCTION item set. F2:WFM • The display disappears if remains idle for 2 seconds. F3:LEVEL METER • The operational status is displayed in “XXXXX” ( F4:PIXEL TO PIXEL page 23 “Operation items displayed when a F5:PIXEL POS. FUNCTION button is used”).
Resumen del contenido incluido en la página 14
How to Use the On Screen Menu (continued) Menu operations 1. Push [MENU] to display the MAIN menu. 3. Push [ , ] to select the sub menu, then push [ENTER]. The setting values in the sub menu change to green. MARKER MARKER OFF 16:9 OFF 4:3 OFF BACK NORMAL CENTER OFF GPI PRESET1 4:3 GPI PRESET2 4:3 SET 2. Push [ , ] to select the menu, then push [ENTER]. 4. Push [ , ] to select the setting values, then push [ENTER]. [MAIN MENU] Push [MENU] to cancel. MARKER FUNCTION MARKER ON
Resumen del contenido incluido en la página 15
User Data You can change the menu setting values and picture adjusting knob settings, then save and load up to 5 combinations of screen adjustment values as user data. You can also return the setting values and adjustment values to the factory preset settings. The following settings are included in user data. • Menu settings except for “SETUP LOAD/SAVE” (including the button function settings on the front of the monitor) • Screen adjustment values changed in picture adjusting knob Saving use
Resumen del contenido incluido en la página 16
Main Menu Menu configuration MAIN MENU MARKER MARKER 16:9 VIDEO CONFIG GAMMA SELECT 4:3 FILM GAMMA CONT./BACK. BACK SYSTEM CONFIG COLOR TEMP. BACKLIGHT CENTER SHARPNESS MODE SUB WINDOW GPI PRESET1 SHARPNESS H WFM POSITION GPI PRESET2 SHARPNESS V MENU POSITION USER0-63 I-P MODE ROTARY POSITION D93 MONO STATUS DISPLAY D65 ANAMO SETUP LOAD D56 SD ASPECT SETUP SAVE VAR1 SCAN FAN MOTOR VAR2 NOISE WIPE COLOR SPACE VAR3 FUNCTION1 FUNCTION FUNCTION2 FUNCTION3 FUNCTION4 FUNCTION5 FUNCTION DISPLAY GPI CO
Resumen del contenido incluido en la página 17
Main Menu (continued) MARKER The underlined values are factory preset setting values. Sub menu Settings Explanation *1 MARKER Used to make MARKER settings effective. *2*3 Used to select/display the type of marker when the aspect ratio 16:9 <4:3 > setting is 16:9. <13:9> Marker not displayed. <14:9> <4:3> 4:3 marker <13:9> 13:9 marker <14:9> 14:9 marker CNSCO marker VISTA marker <95%> 95% Area marker <95%> <93%> 93% Area marker <90%> 90%
Resumen del contenido incluido en la página 18
Main Menu (continued) Types of MARKER g 16:9 marker g 4:3 marker (Displayed when using HD, or when using SD (Displayed when using SD with a 4:3 aspect ratio) with a 16:9 aspect ratio) A dotted line is displayed as the marker. The marker is only displayed as a vertical bar. In addition, the section becomes the “MARKER BACK” item. 95% Area marker 93% Area marker 4:3 marker 13:9 marker 90% Area marker 88% Area marker 14:9 marker VISTA marker, CNSCO marker A horizontal dotted line is displayed
Resumen del contenido incluido en la página 19
Main Menu (continued) VIDEO CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation GAMMA Used to select the gamma curve. *1*2 SELECT Standard mode FILM mode Color emphasis mode (in the gamma characteristic in which shades are valued more than the contrasts, it is suitable for use by the studio and the post production, etc. ) When FILM is selected, mark is displayed in the top left of the scre
Resumen del contenido incluido en la página 20
Main Menu (continued) 3 g WB adjustment mode You can adjust “WHITE BALANCE VAR1” – “WHITE BALANCE VAR3” (WB) by selecting “VAR1” – “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu. The underlined values are factory preset setting values. Sub menu Settings Explanation *1 Used to select the color temperature that will become the COLOR TEMP. basis for adjustments. Adjustable settings 0–63 (color temperature around 3000K–9300K) Color temperature a
