Resumen del contenido incluido en la página 1
The lightning flash with arrowhead
symbol, within an equilateral triangle is
CAUTION
intended to alert the user to the presence
of uninsulated “dangerous voltage”
RISK OF ELECTRICAL SHOCK
within the product’s enclosure that may
DO NOT OPEN
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
CAUTION: To reduce the risk of electric shock. Do
equilateral triangle is intended to alert
not remove cover (or back). No user
the user t
Resumen del contenido incluido en la página 2
2 Safety Precautions WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO Under the following conditions, � The AC power supply is controlled by turning on/ RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE 1. Turn off the power. off the POWER switch on the rear panel. If the PLACED ON THE APPARATUS. 2. Unplug this product from the wall outlet. product is installed in a place where you cannot 3. Refer service to qualified service personne
Resumen del contenido incluido en la página 3
FCC NOTICE IMPORTANT SAFETY INSTRUCTIONS CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the 1) Read these instructions. equipment. 2) Keep these instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, 3) Heed all warnings. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 4) Follow all instructions. harmful interference when the e
Resumen del contenido incluido en la página 4
4 Installation CAUTION To detach the stand � Do not rest your arm on the monitor or lean against the monitor. CAUTION � Do not touch the LCD panel when installing the monitor. Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged. � Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. You can place the monitor in the following two ways when using it on the supplied stand
Resumen del contenido incluido en la página 5
To adjust the stand height To prevent an accidental fall To change the stand height, detach the stand from the monitor (☞ “To detach the stand” on page 4). Then, Fix the monitor to a wall by using strings. change the position of the stand plate according to the stand height you want by choosing the screw holes to use. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two holes on the upper side) using M4 x 10 mm screws (not provided). Bind
Resumen del contenido incluido en la página 6
6 Daily Operations / Connections 7 Front panel � “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work). Tally lamp � The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed and the lamps do not light). This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. � You can select the color of th
Resumen del contenido incluido en la página 7
Menu Operations Audio Channel Selection On the Information Display On the Status Display Select audio channels emitted from the speakers The monitor displays the information below. If you press the INPUT SELECT button (☞ t on 1 Display the menu. (L/R) and the AUDIO (MONITOR OUT) (OUT1(L)/ � Make the setting to display/hide each page 6) currently lit, the status of the input signal To display the MAIN MENU OUT2(R)) terminals, when EMBEDDED AUDIO information using the MENU with the exception an
Resumen del contenido incluido en la página 8
88 Daily Operations / Connections (cont.) 7 E. AUDIO HD/SD SDI (SWITCHED OUT) terminal w POWER switch 7 Rear panel (BNC) Turns AC power on or off. CAUTION Carry handle Output terminal for the HD/SD SDI signals. � You need to press button (☞ u on page 6) Do not connect the Use this handle when carrying the monitor. � The SDI signals of the current input (SDI 1 or SDI to use the monitor after turning on the POWER power cord until all 2) are re-clocked, then emitted. switch. other connections
Resumen del contenido incluido en la página 9
Computer signals (preset) 7 Available signals DVI-D (HDCP) terminals The following signals are available for this monitor. Resolution Frequency √: Acceptable No. Signal name Scan system Horizontal Vertical Horizontal (kHz) Vertical (Hz) —: Not acceptable Video signals 1VGA60 640 480 31.5 59.9 Non-interlace Input terminal Signal format 2 WVGA60 852 480 31.5 59.9 Non-interlace shown in the COMPO. E. AUDIO HD/ DVI-D (HDCP) No. Signal name 3 SVGA60 800 600 37.9 60.3 Non-interlace status display V
Resumen del contenido incluido en la página 10
10 Menu Configuration—MAIN MENU For the operation procedure, see page 7. PICTURE FUNCTION Setting for the picture quality Item To do Setting value APERTURE Select the frequency of the luminance signal compensated in OFF, LOW, HIGH 1 FREQ.* “APERTURE LEVEL.” APERTURE Compensate the frequency response of the luminance signal of the 01 – 10 1 LEVEL* video signal. CTI Adjust the clearness of the outlines of the chrominance signal. OFF, NORMAL, HARD LTI Adjust the clearness of the outlines of the lum
Resumen del contenido incluido en la página 11
1 2 MARKER* * Settings for marker functions 1/2 Item To do Setting value 3 AREA MARKER* Activate/deactivate the area marker and select the ☞ “NOTE” style of it. 3 MARKER ASPECT* Select the aspect ratio of the area marker. 4:3, 14:9, 13:9, 2.35:1, 1.85:1, 1.66:1 SAFETY MARKER Activate/deactivate the safety marker and select the ☞ “NOTE” style of it. SAFETY AREA Adjust the area of the safety marker. 80% – 100% FRAME Displays/hides the frame indicating the area of the OFF, ON specified aspect ra
Resumen del contenido incluido en la página 12
12 Menu Configuration—MAIN MENU (cont.) AUDIO SETTING Settings for the audio output balance, EMBEDDED AUDIO signals and level meter Item To do Setting value BALANCE Adjust the balance between the right and left L5 – L1, 0, R1 – R5 speakers. 1 E.AUDIO GROUP* Select the audio channel group of the ☞ “NOTE” EMBEDDED AUDIO signals. LEVEL METER Adjust the level meter display for the ☞ “NOTE” 1 SETTING* EMBEDDED AUDIO signals. LEVEL METER ch Select how the audio channels are displayed on OFF, LINE (Di
Resumen del contenido incluido en la página 13
1 WAVE FORM SETTING* Settings for the wave form monitor Item To do Setting value POSITION Select the position of the wave form monitor. 1 (lower right), 2 (lower left), 3 (upper left), 4 (upper right) FILTER Activates/deactivates the low-pass filter for the FLAT (no filter), LOWPASS incoming wave form data. GAIN Adjust the gain level for the incoming wave form –10 – +10 data. OVER LEVEL Select the over level for the incoming luminance ☞ “NOTE” signals. MARKING Activates/deactivates the function
Resumen del contenido incluido en la página 14
14 Menu Configuration—SET-UP MENU FUNCTION SETTING For the operation procedure, see page 7. Setting for the sub menu display, color system, color of the tally lamp and the picture size. Item To do Setting value sub menu POSI. Select the contents and displaying position of “sub menu.” ☞ “NOTE” COLOR Select the color system. AUTO, NTSC, PAL SYSTEM � If the picture is unstable with “AUTO,” select “PAL” or “NTSC.” TALLY SELECT Select the color of the tally lamp. GREEN, RED SD4:3 LARGE Change the pic
Resumen del contenido incluido en la página 15
(☞ “External Control” on pages 16 to 18) REMOTE SETTING Settings for the external control Item To do Setting value SERIAL TYPE Select the input terminal used for external control by RS232C, RS485 serial communication. PARALLEL TYPE Select the external control method for the MAKE/ MAKE, TRIGGER, SET TRIGGER terminal. PIN1, PIN2, PIN3, Assign the control functions to the pins of the MAKE/ ☞ “Functions controlled by the MAKE/ PIN4, PIN5 TRIGGER terminal. TRIGGER system” on page 17 � Assign a functi
Resumen del contenido incluido en la página 16
16 External Control Control priority is as follows. 7 About the external control MAKE > TRIGGER = serial communication = buttons and menu on the monitor This monitor has three external control terminals. � You can use the external control even when “CONTROL LOCK” is set to “ON” (☞ page 15). � MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. � When the monitor is off (on standby), external control is not available. But certain external controls (starting/ (1) M
Resumen del contenido incluido en la página 17
7 Using the MAKE/TRIGGER system Display Functions to be controlled Opening Short-circuiting The MAKE/TRIGGER terminal is configured as follows. You can assign a function to each pin terminal in TALLY SEL Selects the color of the tally lamp. Green Red “REMOTE SETTING” (☞ “PIN1, PIN2, PIN3, PIN4, PIN5” in “PARALLEL TYPE” on page 15). SDI 1 Changes the input to “SDI 1.” Invalid Valid � You cannot change the functions assigned to the pin terminals f
Resumen del contenido incluido en la página 18
18 External Control (cont.) Example of communication procedures 7 Using the serial communication 1 Starting the communication: You can control the monitor from a personal computer etc. via the RS-485 or RS-232C terminal. connection command (!00BCN1Cr) � Consult your dealer for the details of the external control specification. Monitor 2 Monitor’s status (@00BOKCr) Terminal Input terminal Cable Communication specifications specification 3 Selecting “SDI 1” input (
Resumen del contenido incluido en la página 19
Troubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page Symptom Probable cause and corrective action Page 6 � Adjust the picture contrast or brightness by using the adjustment 6, 14 � Press the button. The picture becomes 8 knobs on the front panel. Or, adjust “CONTRAST” or “BRIGHT” o
Resumen del contenido incluido en la página 20
20 Troubleshooting (cont.) Maintenance Unplug this product from the wall outlet before cleaning. 7 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes Screen troubleshooting easier. Whenever a problem occurs, one or some of the INPUT SELECT lamps will flash. If this To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be happens, follow the steps below and contact your de
