Resumen del contenido incluido en la página 1
MDRC-2124
User manual
Resumen del contenido incluido en la página 2
2
Resumen del contenido incluido en la página 3
Copyright notice This document is copyrighted. All rights are reserved. Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2010 Barco N.V. All rights reserved. 3
Resumen del contenido incluido en la página 4
Table of Contents Table of Contents ....................................................................................... 4 Preface........................................................................................................ 5 Important notice.................................................................................... 5 Environmental information................................................................... 6 Safety Instructions.................................
Resumen del contenido incluido en la página 5
Preface Important notice Notice Although every attempt has been made to achieve technical accuracy in this document, we assume no responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable documentation possible; if you discover errors, please let us know. Barco software products are the property of Barco. They are distributed under copyright by Barco N.V., for use only under the specific terms of a software license agreement between B
Resumen del contenido incluido en la página 6
Environmental information Disposal Information The lamps inside the display contain mercury. Do not throw the display in the trash. Dispose of it as required by local ordinances or regulations. This equipment has required the extraction and use of natural resources for its production. It may contain hazardous substances for health and environment. In order to avoid the dissemination of those substances in the environment and to diminish the pressure on natural resources, we encoura
Resumen del contenido incluido en la página 7
Safety Instructions General Recommendations • Read the safety and operating instructions before operating the display. • Retain safety and operating instructions for future reference. • Adhere to all warnings on the display and in the operating instructions manual. • Follow all instructions for operation and use. Electrical shock Warning- To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture Warning- Please do not open or disassemble
Resumen del contenido incluido en la página 8
Intended use This display is an AMLCD display designed for viewing medical X-ray images. This unit should not be used near patients and should be kept outside of 1.83 m perimeter and 2.29 m vertical. Power connection For use only with power supply SINPRO:HPU100-108 Input ：100-240V~, 47-63Hz, 1.2-0.5A Power cords Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 300 V min., provided with a hospital-grade type plug 5-15P configuration for 1
Resumen del contenido incluido en la página 9
Equipment not complying with IEC 60601 must be kept outside the patient environment, as defined in the standard as at least 1.5 meters from the patient or the patient support. Any person who connects external equipment to signal input, signal output, or other connectors has formed a system and is therefore responsible for the system to comply with the requirements of IEC 60601-1-1. If in doubt, speak with a qualified technician. In locations where 240V outlets are used, connect this
Resumen del contenido incluido en la página 10
Recommendations for using your display system 1. Optimize the lifetime of your display Enabling the Display Power Management System (DPMS) of your display (in the display’s Settings menu) will optimize its diagnostic lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go to “Power Options Properties” in the “Con
Resumen del contenido incluido en la página 11
performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels. To learn more about LCD technology and missing pixels, consult the dedicated white paper available at www.barcomedical.com. 4. Enhance user comfort Every Barco multi-head display system is color matched with the highest specification in the market. Barco recommends keeping color-matched displays together. Furthermore, it is important to use all displays of a mul
Resumen del contenido incluido en la página 12
Cosmetics and oils on the skin are both detrimental to the screen and difficult to remove. • Allow the display to warm up to room temperature before turning it on. Avoid sudden temperature changes in the environment, as this may cause condensation, which damages the display. • Do not set up the display near strong light or heat sources. • Do not block the vents on the back of the display or install the display in a built-in enclosure. Blocked vents cause excessive heat to build up
Resumen del contenido incluido en la página 13
Cleaning the display Observe the following guidelines to maintain display and LCD screen. • Use a clean, lint-free, absorbent cotton cloth to clear off any residual glue from removal of the protective film or to remove surface dust. Apply light pressure to remove the dust. • Dampen a clean cloth with a small amount of isopropyl alcohol to remove glue or dust if the screen is still not clean. Do not saturate the cloth; otherwise, alcohol may seep into the display case and collect in
Resumen del contenido incluido en la página 14
Explanation of symbols DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services. CAUTION. Read the accompanying text carefully for proper operation and maintenance of the display system. DIRECT CURRENT ALTERNATING CURRENT RELATIVE HUMIDITY Storage & transport: 5%~ 90% (No condensation) Operating: 8% ~ 80% TEMPERATURE Storage & transport:
Resumen del contenido incluido en la página 15
Introduction About the product Thank you for choosing Barco. The MDRC-2124 is an LCD display with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD). This product also demonstrates the following outstanding features: • DVI-I and DisplayPort signal • 24” diagonal Screen • 1920x1200 high resolution • Wide Viewing Angle Technology • 31.5 ~ 80 kHz horizontal scan • 59 ~ 61 Hz refresh rate • Auto Adjustment and Re-scaling function • High quality full screen r
Resumen del contenido incluido en la página 16
Package overview User manual USA Power Cord EUR Power Cord China Power Cord DisplayPort Signal DVI-D Signal Cable Power Adapter Cable 16
Resumen del contenido incluido en la página 17
Display parts, controls and connections Front View Power LED 1. Green indicates the display is turned on. 2. Orange indicates the display is in stand-by mode. 17
Resumen del contenido incluido en la página 18
Back View Control wheel 1. Press the control wheel for 1 sec to power off to the LCD Display. 2. Swivel the control wheel for OSD menu. DisplayPort input DVI-I input USB upstream USB downstream DC Power input Kensington Security Slot The display can be secured to your desk or any other fixed object with Kensington lock security products. Kensington lock itself is not included. 18
Resumen del contenido incluido en la página 19
Installation Connecting the display Use only the power adapter, power cord, and the video cables shipped with this display. To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is turned off. 2. Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet. ( ). 3. For a PC with DisplayPort output, connect the DisplayPort signal cable from t
Resumen del contenido incluido en la página 20
Note: To ensure the LCD Display will work well with your computer, please configure the display mode of your graphics card to make it less than or equal to the native resolution, and make sure the timing of the display mode is compatible with the LCD screen. We have listed the “Compatibility Modes” of this LCD screen in appendices for your reference. 20
