Resumen del contenido incluido en la página 1
®
VE155b ViewPanel
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell'utente
Guia do usuário
Användarhandbok
Käyttöopas
Full 15.0" Diagonal Viewable Screen
Resumen del contenido incluido en la página 2
Contents Product Registration..............................................................2 For Your Records..................................................................2 Getting Started Package Contents.................................................................3 Precautions ...........................................................................3 Quick Installation...................................................................4 Installation of Wall Mount (Optional) ..........
Resumen del contenido incluido en la página 3
Copyright © ViewSonic Corporation, 2002. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DD
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Quick Installation Optional: For instructions on wall mounting, If your computer does not have a CD-ROM see page 5 of this user guide. drive, see “Customer Support.” (1) Wait for the CD-ROM to auto-start. 1 Connect power cord NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in the 2 Connect video cable Windows Explorer, then double-click on viewsonic.exe. ® Make sure both the ViewPanel and (2) Follow the on-screen instructions. computer are turned OFF Connect th
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
Using the ViewPanel Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; ® example 60 Hz). After setting the timing mode, use the OnView controls to adjust the screen image. ® For the best picture quality set your ViewPanel timing mode to: VESA 1024 x 768 @ 60 Hz. To set the Timing Mode: 1 Set the resolut
Resumen del contenido incluido en la página 8
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Main Menu with OnView controls Front Control Panel Displays, saves Power light changes to, and exits the Main Menu. Power On/Off Scroll through menu Selects a highlighted control. Also, displays the control screen for the options and adju
Resumen del contenido incluido en la página 9
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. Main Menu AUTO SET Auto Adjust Contrast/Brightness Color Adjust i Information Image Adjust ? Setup Menu Memory Recall 1:EXIT 2:SELECT NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11. 2 To highlight a control you want to adj
Resumen del contenido incluido en la página 10
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Adjust works with most common video cards. If ® this function does not work on your ViewPanel , then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adjusts the differe
Resumen del contenido incluido en la página 11
Control Explanation Information displays the timing mode (video signal input) i coming from the graphics card in your computer. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1024 x 768 @ 60 Hz (recommended) means that the resolution is 1024 x 768 and the refresh rate is 60 Hertz. Information H. Frequency: 48.60 KHz V. Frequency: 60.00 Hz Pixel Clock: 65.00 MHz Resolution:
Resumen del contenido incluido en la página 12
Resumen del contenido incluido en la página 13
Control Explanation Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide. ViewSonic VE155b 12
Resumen del contenido incluido en la página 14
Other Information Specifications Type 15" (full 15" viewable diagonal area), TFT (Thin Film LCD Transistor), Active Matrix XGA LCD, 0.297mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare +20° , -5° Panel tilt Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) Input signal Separate Sync, f :30-62 kHz, f :50-75 Hz h v PC Up to 1024 x 768 Non-interlaced Compatibility 1 Power Macintosh up to 1024 x 768 Macintosh Recommended
Resumen del contenido incluido en la página 15
Troubleshooting No power Make sure power button (or switch) is ON. ® Make sure A/C power cord is securely connected to the ViewPanel . Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image Make sure the video cable supplied with the ViewPanel is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the
Resumen del contenido incluido en la página 16
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Web site T = Telephone Email Region F = FAX United States viewsonic.com/ T: (800) 688-6688 service.us@ support F: (909) 468-1202 viewsonic.com Canada viewsonic.com/ T: (800) 688-6688 support F: (909) 468-1202 service.ca@ viewsonic.com United Kingdom viewsoniceurope.com T: 0800 833 648 service.eu@ F: (01293) 643910 viewsoniceurope.com Eu
Resumen del contenido incluido en la página 17
Cleaning the ViewPanel ® MAKE SURE THE VIEWPANEL IS TURNED OFF. NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of a non-a
Resumen del contenido incluido en la página 18
Limited Warranty ® VIEWSONIC LCD VIEWPANEL What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSoni
Resumen del contenido incluido en la página 19
Appendix Safety Guidelines Warning: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certi- fied for the individual country. Some examples are listed below: USA................. UL Switzerland ..... SEV Canada............. CSA Britain ....
Resumen del contenido incluido en la página 20
Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, ther
