Resumen del contenido incluido en la página 1
®
ViewSonic
N4200w
LCD Display
- User Guide
- Guide de l’utilisateur
- Guida dell’utente
-
Model No. : VS10945-1M
Resumen del contenido incluido en la página 2
Contents Compliance Information.............................................................................................1 Declaration of RoHS Compliance ..............................................................................2 Important Safety Instructions.....................................................................................3 Copyright Information ................................................................................................4 Product Registration
Resumen del contenido incluido en la página 3
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
Resumen del contenido incluido en la página 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Actual Substance Concentration Concentration Lead (Pb)
Resumen del contenido incluido en la página 5
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 8. Do no
Resumen del contenido incluido en la página 6
Copyright Information ® Copyright © ViewSonic Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product im
Resumen del contenido incluido en la página 7
Cleaning the LCD Display Make sure the LCD Display is turned off. Never spray or pour any liquid directly onto the screen or case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of no
Resumen del contenido incluido en la página 8
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD display package includes: LCD Display Power Cable VGA Cable Universal Remote Control with batteries Quick Start Guide ViewSonic User Guide ViewSonic N4200w 6
Resumen del contenido incluido en la página 9
The wall type is installed Use only approved wall-mounting brackets advised by ViewSonic or your local distributor. To install the wall-mounting brackets to LCD display and fix LCD display to the wall safely, please use the following guidelines: 1. Cut off the power. 2. Set the LCD display on a table or work surface, screen-down with a towel or woolen blanket between the screen and the surface to protect the display. 3. Disassemble 6 screws in the base. 4. According to the wall
Resumen del contenido incluido en la página 10
Move loudspeaker secure To detach the loudspeakers from the LCD display, please read the following guidelines: 1. Cut off the power. 2. Disassemble 6 screws of the back loudspeaker(3 screws on each side). 3. Exert oneself outward, remove the loudspeaker ViewSonic N4200w 8
Resumen del contenido incluido en la página 11
View of the Product Front A INPUT Select input sources B MENU Turn OSD menu ON/OFF C - VOL Decrease volume or adjust a highlighted control decreasingly while in OSD menu D Increase volume or adjust a highlighted control increasingly VOL + while in OSD menu E CH Channel down/ Scroll down F CH Channel up/ Scroll up G POWER Turn the power ON/OFF 9 ViewSonic N4200w
Resumen del contenido incluido en la página 12
Back A POWER S/W Power S/W B AC IN Using cable provided, connect a power source. C HDMI(1) Have one HDMI cable terminals of your DVD player. Have one HDMI cable terminals of your DVD player. D HDMI(2) E Connect the VGA cable output of PC to the VGA VGA terminal input. F Connect the Audio in cable from audio output of your PC PC STEREO to the audio input terminal. ViewSonic N4200w 10
Resumen del contenido incluido en la página 13
Component A R Connect Video/Audio cable from compatible devices into the side jack. B Connect Video/Audio cable from compatible devices into the L side jack. C VIDEO Connect the external video device such as VCR, DVD, and video game into this jack. D S-V1 Connect the external video device such as VCR, DVD, and video game into this jack. E R Connect Video/Audio cable from compatible devices into the side jack. F L Connect Video/Audio cable from compatible devices into the side
Resumen del contenido incluido en la página 14
Remote Control S A B C R D Q E F P I N G O H J M L K Remote control button function as follow A Source button Select Input Source B 0~100+ number button No functions C Volume Adjust Volume D CC button Close Caption ViewSonic N4200w 12
Resumen del contenido incluido en la página 15
E UP/DOWN/LEFT/ UP/DOWN for OSD function select and LEFT/ RIGHT RIGHT/ ENTER button for function adjust VOL- and VOL+ button=adjust the volume when there is no OSD menu display. CH﹀ and CH＾ = change the OSD menu display (For certain models) F Mute On/Off MUTE button G FREEZE When the program information you want to capture, press button. Press again, and the picture is released H DISPLAY Display the sources and time I SLEEP Set timer to turn off the Display J PIP/POP (Guide) Activ
Resumen del contenido incluido en la página 16
Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. Insert batteries according to (+) and (-) markings. Inser
Resumen del contenido incluido en la página 17
2. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N4200W. AV model: RCA A/V Cable (Cable not supplied) VCR S-Video model: S-Video Cable (Cable not supplied) Audio in Cable (Cable not supplied) VCR 15 ViewSonic N4200w
Resumen del contenido incluido en la página 18
YCbCr model: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR YPbPr model: YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Player or VCR ViewSonic N4200w 16
Resumen del contenido incluido en la página 19
HDMI model: Connect the HDMI cable from DVI output of your DVD player to the HDMI terminal input of N4200W. HDMI cable DVD Player (Cable not supplied) HDMI Cable (Cable not supplied) Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting HDMI audio to HDMI. However, the input source should be in HDMI. 17 ViewSonic N4200w
Resumen del contenido incluido en la página 20
3. Connect to the PC VGA (15pin D-Sub): Connect the VGA cable from VGA output of PC to the VGA terminal input of N4200W. PC up to 1280 x 1024 , or 1360 x 768 is the preferred resolution. PC VGA 15 Pin Cable PC Audio in: Connect the Audio In cable (green) from audio output of your PC to the audio input terminal (green) of N4200W. PC PC Audio in Cable (Cable not supplied) ViewSonic N4200w 18
