Resumen del contenido incluido en la página 1
Touchmonitor User Guide
1938L 19” LCD Open-Frame Touchmonitor
Resumen del contenido incluido en la página 2
User Guide 19" LCD OPEN-FRAME TOUCHMONITOR 1938L Family 3000 Series Revision A P/N E481511
Resumen del contenido incluido en la página 3
Copyright © 2008 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise with- out prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Resumen del contenido incluido en la página 4
Table of Contents Chapter 1 Introduction 7 Appendix C Product Description 7 Touchmonitor Specifications .....................................29 Precautions ................................................................7 IntelliTouch Touchscreen Specifications .............30 About the Product ......................................................8 Surface Capacitive Touchscreen Specifications .31 SecureTouch Touchscreen Specifications ..........32 Chapter 2 Acoustic Pulse Recognition Specifica
Resumen del contenido incluido en la página 5
C H A P T E R 1 INTRODUCTION Product Description Your new touchmonitor combines the reliable performance of touch technology with the latest advances in (LCD) display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monitor incorporates a 19” color active matrix thin-film-transistor (TFT) to provide superior display performance. A maximum resolution of WXGA 1440 x 900 is ideal for displaying graphics and images. Other outst
Resumen del contenido incluido en la página 6
About the Product Your LCD open-frame touchmonitor is a 19” WXGA TFT color display with the following features: The internal microprocessor digitally controls auto-scanning for horizontal scan frequencies between 31.5 KHz and 80 KHz, and vertical scan frequencies between 56.3 Hz and 75.0 Hz. In each frequency mode, the microprocessor-based circuitry allows the monitor to function at the precision of a fixed frequency. High contrast color TFT LCD display supports resolutions up to WXGA 1440 x
Resumen del contenido incluido en la página 7
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and the driver software. Unpacking Your Touchmonitor Check that the following 9 items are present and in good condition: LCD touchmonitor Video cable USB cable Elo Quick Start Guide CD Software Serial cable DVI-D Cable Touch Tools CD + Quick Install Guide Strain Relief kit Mounting Brackets Note: Please visit the
Resumen del contenido incluido en la página 8
Touch Interface Connection Note: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1 2 2 5 3 3 Adapter Video Cable Serial Cable USB Cable OSD Remote Control Key DVI Cable (option) 1. Connect one end of the power adapter to the monitor and the other end to the connector of the power cord. 2. Connect one end of either the touchscreen serial (RS232) cable or the touchscreen USB cable (but not both) to the rear side o
Resumen del contenido incluido en la página 9
Product Overview Front View Rear View 2-11
Resumen del contenido incluido en la página 10
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 The latest versions of drivers and driver information for other operating systems are available on the Elo TouchSystems web site at http://elotouch.com/Support/Downloads/dnld.asp Your Elo touchmonitor is P
Resumen del contenido incluido en la página 11
Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not find a setup.exe file within the download. 1. Insert the Elo CD-ROM in your computer's CD-ROM drive. 2. If the AutoStart feature for your CD-ROM drive is active, the system automatically
Resumen del contenido incluido en la página 12
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1. Insert the CD-ROM in your computer’s CD-ROM drive. 2. From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter). 3. Type I
Resumen del contenido incluido en la página 13
Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 To install Windows 2000 and Windows XP, you must use the "update driver" method; you will not find a setup.exe file within the download. NOTE: For Windows 2000 you must have administrator access rights to install the driver. 1. Insert the Elo CD-ROM in your computer’s CD-ROM drive. If running Windows 98, Windows ME or Windows 2000, the Add New Hardware Wizard starts. 2. Choose Next.
Resumen del contenido incluido en la página 14
Installing APR USB Touch Driver for Windows XP Insert the Elo APR CD-ROM in your computer’s CD-ROM driver. Follow the directions on the screen to complete the APR 2.0 driver setup for your version of Windows. 1.Click Start > Run. 2.Click the Browse button to locate the SW600117.exe program on the CD-ROM. 3.Click Open, then OK to run SW600117.exe. 4.Follow the directions on the screen to complete the driver setup for your version of Windows. 2-16 User Guide
Resumen del contenido incluido en la página 15
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor will not likely require adjustment. However, variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, 1440 x 900 at 60 Hz. Use the Display control panel in Windows to choose 1440 x 900 resolution. Operating in other resolutions will degrade video performance. For further
Resumen del contenido incluido en la página 16
Rear Panel Controls SEL MENU 12 3 4 5 Control Function 1. Menu/Exit Display/exits the On Screen Display (OSD) menus. 2. 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Select item counter-clockwise. 3. 1. Enter brightness adjustment. 2. Decrease value of the adjustment item. 3. Select item clockwise. 4. Select Selects the adjustment items from the OSD menus. 5. Power Switch Switches the power of the monitor. Remote OSD Buttons (option) 1 2 3 4
Resumen del contenido incluido en la página 17
Controls and Adjustment On Screen Display (OSD) Menu Functions To Display and Select the OSD Functions: 1. Press the Menu key to activate the OSD menu. 2. Use or to move through the menu. Press the Select key, the parameter will be highlighted when selected. 3. To quit the OSD screen at any time during the operation, press the Menu key. If no keys are pressed for a short time period, the OSD automatically disappears. NOTE: The OSD screen will disappear if no input activities are detect
Resumen del contenido incluido en la página 18
On Screen Display (OSD) Control Options Control Description Contrast Increases or decreases contrast. Brightness Increases or decreases brightness. V-Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings. RGB Press or to select 9300, 6500, 5500, 7500 and USER. Only when selecting USER can you make adjustments to the R/G/B content. Press Enter to restore to factory default setting. Resolution Choose f
Resumen del contenido incluido en la página 19
Preset Modes To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When no mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 7 user modes. The only condition to store as a user mode is the new display information must have 1 KH
Resumen del contenido incluido en la página 20
Power Management System The monitor is equipped with the power management function which automatically reduces the power consumption when not in use. Power Mode Consumption On <45W Sleep <4W Off <2W We recommend utilizing a screensaver when the touchmonitor is not in use. NOTE: The monitor automatically goes through the Power Management System (PMS) steps when it is idle. To activate the monitor, press any key on the keyboard or move the mouse. 3-22 User Guide
