Resumen del contenido incluido en la página 1
SyncMaster LD190/LD190G/LD220/LD220G
LCD Monitor
User Manual
Resumen del contenido incluido en la página 2
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Important to read and under- Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Grou
Resumen del contenido incluido en la página 3
Safety Instructions Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the product due
Resumen del contenido incluido en la página 4
Safety Instructions Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the in- ternal temperature. Put down the monitor carefully. • Failing to do so may damage the monitor. Do not place the front of the product on the floor. • Otherwise, this may result in damage to t
Resumen del contenido incluido en la página 5
Safety Instructions When cleaning the product, disconnect the power cord and clean it softly with a dry cloth. • (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indica- tion labels on the product. Since the product housing is easily scratched, make sure to use the specified cloth only. • Use the specified cloth adding only a little water. As the product may be scrat
Resumen del contenido incluido en la página 6
Safety Instructions Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Make sure that the ventilating opening is not blocked by a table or curtain. • Otherwise, it may result in fire due to an increase in the internal temperature. Do not place any containers containing water, vases, flower- pots, medicines as well
Resumen del contenido incluido en la página 7
Safety Instructions • If you use the product in a location exposed to vibrations, it may damage the product and result in fire. When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product. • Otherwise, it may result in electric shock or fire. Ensure that children do not hang onto the product or climb up onto the product. • The product may fall and cause personal injury or death. If you do not use the product for a long
Resumen del contenido incluido en la página 8
Safety Instructions Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the prod- uct. Good Postures When Using the Monitor When using the product, use it in the correct posi- tion. • Keep your back straight while lookin
Resumen del contenido incluido en la página 9
Introduction {LD190,LD190G}Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all loca- (Not available in all loca- tions) tions) Cables D-Sub Cable Power Cord USB Cable Others Cleaning Cloth
Resumen del contenido incluido en la página 10
Introduction Note Cleaning Cloth is only provided for highly polished black products as a product feature. Your Monitor Initial Settings Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the Power button off and on. It will be displayed again. It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching the maximum count. Note The resolution displayed on the screen is the optimal resolution for
Resumen del contenido incluido en la página 11
Introduction When OSD is not on the screen, push the button to adjust brightness. AUTO button When OSD is not on the screen, push the button for auto adjustment. Adjust buttons [ ] These buttons allow you to adjust items in the menu. Power button [ ] Use this button for turning the product on and off. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unat
Resumen del contenido incluido en la página 12
Introduction The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Note The location of the Kensington Lock may be different depending on its model. Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction . 2. Connect the Kensington Lock cable. 3. Fix the
Resumen del contenido incluido en la página 13
Introduction Cables D-Sub Cable Power Cord USB Cable Others Cleaning Cloth Note Cleaning Cloth is only provided for highly polished black products as a product feature. Your Monitor Initial Settings Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the Power button off and on. It will be displayed again. It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching the maximum count. Note Th
Resumen del contenido incluido en la página 14
Introduction Front Note Touch them lightly with your fingers to use them. MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Brightness button [ ] When OSD is not on the screen, push the button to adjust brightness. AUTO button When OSD is not on the screen, push the button for auto adjustment. Adjust buttons [ ] These buttons allow you to adjust items in the menu. Power button [ ] Use this button for turning the pr
Resumen del contenido incluido en la página 15
Introduction POWER port Connect the power cord for your monitor to the POWER port on the back of the product. USB OUT port DOWN(USB downstream port) Connect the DOWN port of the USB monitor and a USB device with the USB cable. UP(USB upstream port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. USB IN port Connect the port of the monitor and the USB of the computer with the USB cable. RGB IN port Connect the D-sub cable to the 15-pin, RGB IN port on t
Resumen del contenido incluido en la página 16
Introduction Using the Anti-Theft Kensington Lock 1. Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction . 2. Connect the Kensington Lock cable. 3. Fix the Kensington Lock to a desk or a heavy stationary object. Note See Connecting Cables for further information regarding cable connections.
Resumen del contenido incluido en la página 17
Connections Monitor connection with D-SUB cable Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [RGB IN] Connected to a Macintosh. • Connect the monitor to the Macintosh computer using the D-sub connection cable. No
Resumen del contenido incluido en la página 18
Connections Press the Fn + F4( ) key combination once. Then the 'Easy Display Manager'screen appears in which you can select a display device. Whenever you press the F4( ) key while holding down the Fn key, the selected option is changed. Monitor connection with USB cable Note The monitor can be operated with USB cable connection only. The monitor can be operated with D-sub cable connection as well. Installation Requirements Installation Requirements 1.When using a common office or web document
Resumen del contenido incluido en la página 19
Connections (LD220/LD220G models only) Maximum of 4 monitors can be used at a same time with a serial USB connection. Maximum of 6 monitors can be used at a same time with a parallel USB connection. When connecting serially You can connect up to four (4) USB monitors serially. When connecting in parallel You can connect up to six (6) USB monitors in parallel. When connecting external devices to the USB monitor, you can only connect up to four (4) devices. USB Monitor Driver Installation Make sur
Resumen del contenido incluido en la página 20
Connections 3. connecting the monitor to PC with USB cable, the following message (as shown picture) will appear on your PC window in a sequential manner. 4. When installation is completed, a monitor icon is created in the system tray at the bottom of window screen. The installed USB Monitor information is displayed as shown below. 5. When the Driver installation is completed, please set the USB monitor to multi-monitor. • USB Driver online download Please visit the Download Center (http://www.s
