Resumen del contenido incluido en la página 1
Dome C3i/EX Display
User’s Guide
Solaris Systems
Resumen del contenido incluido en la página 2
© 2006 Planar Systems, Inc. All rights reserved. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. Planar provides this information as reference only. Reference to other vendors’ product does not imply any recommendation or endorsement. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any me
Resumen del contenido incluido en la página 3
Contents Product Information iv About the Display 1 Installing the Display 5 Dome CXtra Software 26 Appendix 27 Index 43 Regulatory Compliance 45 Standard Warranty 51 iii
Resumen del contenido incluido en la página 4
Product Information The design of the Dome CX/Dome EX digital displays takes into account every known measure to ensure your personal safety. Improper use of the display can result in electric shock, fire, or damage to the display. Read all instructions before setting up the display. Classification: Shock Protection: Class I. Degree of Protection Against Electric Shock: No applied part. Degree of Protection Against Harmful Ingress of Water: Ordinary equipment (IPX0). Degree of Safety in the
Resumen del contenido incluido en la página 5
Symbol explanations DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services. CAUTION. Read the accompanying text carefully, for proper operation and maintenance of the display system. DANGEROUS VOLTAGE. Important precautions about electric shock. Read the accompanying text carefully, to prevent damage to components of the display system and for your
Resumen del contenido incluido en la página 6
Safety precautions External equipment intended for connection to signal input, signal output, or other connectors, must comply with the relevant IEC standard (EN/IEC 60601-1 series for medical electrical equipment). In addition, all such combinations (systems) must comply with the standard IEC 60601-1-1, Safety requirements for medical electrical systems. Equipment not complying to IEC 60601 must be kept outside the patient environment, as defined in the standard as at least 1.5 meters fro
Resumen del contenido incluido en la página 7
Unpacking and handling tips The Dome display is a precision instrument that requires proper care to maintain product operation and adherence to specification. Unpack the display and components carefully, then set up and handle the unit properly to avoid damage to the LCD panel. • Use both hands to grasp the display case when lifting it from the shipping carton, but avoid touching the screen. • Do not apply pressure to the screen or touch the screen with bare fingers or objects. Pressure ca
Resumen del contenido incluido en la página 8
Cleaning the display Observe the following guidelines to maintain the display and the LCD screen. • Use a clean, lint-free, absorbent cotton cloth to clear off any residual glue from removal of the protective film or to remove surface dust. Apply light pressure to remove the dust. • Dampen a clean cloth with a small amount of isopropyl alcohol to remove glue or dust if the screen is still not clean. Do not saturate the cloth; otherwise, alcohol may seep into the display case and collect in t
Resumen del contenido incluido en la página 9
Shipping/storing the display Keep the display in its shipping container until installation. Return the display to its original container whenever you need to store the unit, move it to another location, or return it for repair. The packaging supplied by the manufacturer protects the display while it is in transit. See environment specifications for more information. Before returning the display to the container, do the following: 1 Swivel the display panel in portrait mode. 2 Push the panel
Resumen del contenido incluido en la página 10
AMLCD panel mounted on desk stand Display controller DC power adapter Power cords Display driver and DVI cable Dome CXtra software Quick reference
Resumen del contenido incluido en la página 11
About the Display The Dome CX/Dome EX display systems, ranging from 2 to 5 megapixels, consists of a TFT LCD panel and a display board and driver. The display’s thin film transistors, in a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT) backlight system. The display is designed for medical imaging in diagnostic settings, in portrait or landscape orientation, and comes fully tuned with gamma correction that complies with the DICOM Part 14 Standard. The all-
Resumen del contenido incluido en la página 12
Display Components Review this illustration of the back panel to identify controls and ports on the display unit. 1 2 3 4 1 2 4 3 Dome C3i display Dome EX display Legend 1 Reset button. Restores the display configuration to its default setting. 2 LED status lights. Provides information about the status of the display. 3 DVI connector. Drives the data to the display. 4 DIN connector. Drives power to the display; 4-pin connector on the Dome E2 display, 8-pin connector on the Dome C3i, Dome
Resumen del contenido incluido en la página 13
Display Positions You can adjust the tilt, height, viewing angle, and orientation of the display to maintain an ergonomic and comfortable viewing position. Make sure that your eyes are level with the top of the display cabinet so that you look downward to read the screen contents. Select a suitable workspace for the display. You need a stable, level, and clean surface near a wall outlet. Tilt range Height range Adjust the tilt angle of the Unfasten the stand lock at the display so that the
Resumen del contenido incluido en la página 14
Desk Stand Features Unfasten the stand lock to adjust display height. Remove the stand cover to thread the power cord and DVI cable connections to the display. To activate the USB hub function, the display must be connected to a USB-compliant computer or another hub with a USB cable. Even if the display is in power-saving mode, the USB devices function when connected to the USB ports of the display. Stand height lock Move the stand lock lever to the left to adjust the height of the displ
Resumen del contenido incluido en la página 15
Installing the Display Before you install the Dome DX2 display controller, you must set the DIP switches for your system configuration. See “Set the DIP Switch on the Dome DX2 Board” on page 6 Moving from Dome C3i to Dome EX Display System If you are switching from a Dome C3i to a Dome EX display system, you need to update the firmware on the Dome DX2 board already installed in your computer system. Do the following: 1 Remove the old DOMEdx2, DOMEmdlib, and DOMEcxtra. 2 Install the new DOME
Resumen del contenido incluido en la página 16
Set the DIP Switch on the Dome DX2 Board You need to disable VGA mode and enable EPROM on the DX2 display controller for Solaris systems. To disable VGA Slide switch 1 into the OFF position. To enable EPROM Slide switch 2 into the ON position. To set landscape mode as default display mode Slide switch 4 into the ON position. (NOTE: For Dome C3i only.) VIdeo 1 port Tips • Access to ports. For displays mounted on a desk stand, rotate the LCD panel from portrait to landscape for access to the p
Resumen del contenido incluido en la página 17
Install the Display Controller Before you install the Dome DX2 display controller, choose a well-ventilated location with an adequate amount of space. Excessive heat cannot dissipate when display vents are blocked. Make sure a grounded AC outlet is within easy reach. When installing multiple display controllers, install all boards before you install the display driver. Turn your computer off. Leave the power cord plugged into the grounded outlet. To install the display controller 1 Remove
Resumen del contenido incluido en la página 18
Connect the Video and Power Cables Turn your computer off. Leave the power cord plugged into the grounded outlet. Use the Dome display with the power adapter and video cable shipped. For the Dome E2 display, use power adapter Ault MW116KA1249F53. For the Dome C3i, Dome E3, Dome E3c, and Dome E5 displays, use power adapter Ault MW122RA1223F52. To connect the cables 1 Plug one end of the DVI cable into the DVI port on the interface plate. Secure the connection. 2 Plug the power cord into the
Resumen del contenido incluido en la página 19
Install Dome DX2 Driver and Dome CXtra Software Before you install the driver, install all DX2 boards and connect all Dome displays first, then boot up your system to install the driver. Installation preparation Installing the DX2/PCI driver for your Sun host requires about 500 KB of free space. The Dome CXtra application requires about 2.5 MB. The reference guide requires an additional 1.3 MB. •200 KB in /kernel/drv •100 KB in /usr/openwin/server/modules •200 KB in /usr/lib •1.3 MB in /opt
Resumen del contenido incluido en la página 20
To install the driver and Dome CXtra 1 Boot up with the -r option. 2Log on as root. 3 Insert the DOME DX2 Solaris driver CD. 4 Mount the CD device if the system does not automount it. Then type: cd /cdrom/012_0006_* 5 To transfer the software packages to the system, type: pkgadd -d dx2pciZZZ.pkg where ZZZ = the revision of the CD. This message appears: The following packages are available: 1 DOMEmdlib DOME MD library (sparc) 1.2.x 2 DOMEdx2 DOME Dx2PCI Display Support (sparc) 1.1.x 3 DOMEcxt
