Resumen del contenido incluido en la página 1
220B4L
www.philips.com/welcome
EN User manual 1
Customer care and warranty 35
Troubleshooting & FAQs 40
Resumen del contenido incluido en la página 2
Table of Contents 1. Important ...............................................1 1.1 Safety precautions and maintenance .1 1.2 Notational Descriptions ............................2 1.3 Disposal of product and packing material ...............................................................3 2. Setting up the monitor .......................4 2.1 Installation .........................................................4 2.2 Operating the monitor ..............................6 2.3 Remove the Bas
Resumen del contenido incluido en la página 3
1. Important Please use approved power cord provided 1. Important by Philips all the time. If your power cord is missing, please contact with your local This electronic user’s guide is intended for service center. (Please refer to Customer anyone who uses the Philips monitor. Take time Care Consumer Information Center) to read this user manual before you use your Do not subject the monitor to severe monitor. It contains important information and vibration or high impact conditions
Resumen del contenido incluido en la página 4
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational Important information for Burn-in/Ghost conventions used in this document. image Notes, Cautions and Warnings Always activate a moving screen saver Throughout this guide, blocks of text may be program when you leave your monitor accompanied by an icon and printed in bold or unattended. Always activate a periodic italic type. These blocks contain
Resumen del contenido incluido en la página 5
1. Important Taking back/Recycling Information for 1.3 Disposal of product and packing Customers material Philips establishes technically and economically Waste Electrical and Electronic Equipment- viable objectives to optimize the environmental WEEE performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primaril
Resumen del contenido incluido en la página 6
2. Setting up the monitor Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents 220B4L 2. Snap in the base in the VESA mount area. VGA (Optional) DVI (Optional) 4
Resumen del contenido incluido en la página 7
2. Setting up the monitor 3. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes.
located at the bottom of the base, and secure the base to the column tightly. 2 1 5
Resumen del contenido incluido en la página 8
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons 8 9 7 6 5 4 2 3 1 10 2 3 4 5 6 1 Kensington anti-theft lock 2 VGA input 3 DVI input 4 DisplayPort(Optional) 5 Audio input 3 6 AC power input 7 Zero power Switch 8 USB downstream 7 6 5 4 2 1 9 USB upstream 10 Earphone jack Switch monitor’s power ON and OFF. Connect to PC Access the OSD menu. 1. Connect the power cord to the back of " #$*+ !
Resumen del contenido incluido en la página 9
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of What is On-Screen Display (OSD)? the On-Screen Display. You can use this as a On-Screen Display (OSD) is a feature in all reference when you want to work your way Philips LCD monitors. It allows an end user to around the different adjustments later on. adjust screen performance or select functions Main menu Sub menu of the monitors directly through an on-screen On 0, 1
Resumen del contenido incluido en la página 10
2. Setting up the monitor Height adjustment This monitor is designed for optimal performance at its native resolution, 1680 × 1050 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1680 × 1050 @ 60 Hz for best results. 110mm Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. Pivot 90° Physical Function 0° Tilt 20 Swivel -65 8
Resumen del contenido incluido en la página 11
2. Setting up the monitor 3. While keeping the release button pressed, 2.3 Remove the Base Assembly for tilt the base and slide it out. VESA Mounting Before you start disassembling the monitor 2 base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or 1 damage the screen. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. 2. Remove the screws from hing
Resumen del contenido incluido en la página 12
3. Image Optimization 2. Keep pressing to toggle among # 3. Image Optimization Photo, Movie, Game, Economy and Off. 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can 3.1 SmartImage =#>=?
! What is it? 4. When SmartImage is enabled, the sRGB SmartImage provides presets that optimize scheme is disabled automatically. To use display for different types of content, dynamically sRGB, you need to disable SmartImage adjusting
Resumen del contenido incluido en la página 13
3. Image Optimization washout in brighter areas maintaining a 3.3 Philips SmartControl Premium dynamic natural values for the ultimate The new SmartControl Premium software video display. by Phillips allows you to control your monitor Turn on over drive circuit for best via an easy to use on-screen graphic interface. response time, reduce jaggy edges for fast Complicated adjustments are a thing of the moving objects on screen, enhance contrast past as this user friendly softwar
Resumen del contenido incluido en la página 14
3. Image Optimization You can adjust more options without wizard by Standard pane. Start with Standard pane Adjust menu Adjust Menu allows you to adjust Brightness, Contrast, and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. Color menu Color Menu allows you to adjust RGB, Black Level, White Point, Display Gamma, Calibration, SmartImage, and SmartKolor. You can follow the instruction and do t
Resumen del contenido incluido en la página 15
3. Image Optimization 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen. 13
Resumen del contenido incluido en la página 16
3. Image Optimization First Color Calibration Screen Eco Power menu Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File > Presets pane. Options menu Cancel closes the UI and returns to the plug in page. Options>Preferences - Will only be active when selecting Preferences from the drop- SmartImage down Options menu. On a non-supported Allow users to change setting for better display display capable of D
Resumen del contenido incluido en la página 17
3. Image Optimization menu. Disabled removes SmartControl Option>Auto Pivot. Premium from the right click context menu. Enable Task Tray icon is checked (On) by default. Enable context menu shows the task tray menu for SmartControl Premium. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display Exit. Run at Startup is checked (On) by d
Resumen del contenido incluido en la página 18
3. Image Optimization
- Theft Deterrence Help menu Pane will only be active when selecting Theft - Will only be active when Deterrence Mode from the drop-down Plug-in selecting User Manual from the drop-down menu. Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. To enable Theft Deterrence, click on On button to bring up the following screen: Help>Version - Will only be active when User can
Resumen del contenido incluido en la página 19
3. Image Optimization Context Sensitive menu X ?
< The Context Sensitive menu is Enabled by Help - Access to User Manual file: Open default. If Enable Context Menu has been User Manual file using the default browser checked in the Options>Preferences pane, then window. the menu will be visible. !
- Displays the tech support page. Chec# $
- Takes the user to PDI Landing and checks the user’s version against the most current avai
Resumen del contenido incluido en la página 20
3. Image Optimization When the window and mouse cursor are within 3.4 SmartDesktop Guide the region, the region will become highlighted. SmartDesktop Note SmartDesktop is in SmartControl Premium. Install SmartControl Premium and select If the outline of the region is not visible when SmartDesktop from Options. dragging the window, “Show windows contents while dragging” is disabled. To enable: 1. In Control Panel, click System. 2. Click Advanced system settings (For Vista & Win7 OS, thi
