Resumen del contenido incluido en la página 1
Public Signage Solutions
EN User Manual
TYPE NR. BDL4635E
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS SAFETY INSTRUCTIONS ................................................................................................................................................................................. 1 Contents ................................................................................................................................................................................................................ 7 Elements Name and Functions ...........................
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
User Manual BDL4635E SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concernin
Resumen del contenido incluido en la página 5
User Manual BDL4635E REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2001 (Safety requirement of Information Technology Equipment) • EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN6100-3-2:2000+A2:2005 (Limits for Harmonic Current Emission) • E
Resumen del contenido incluido en la página 6
User Manual BDL4635E POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 a
Resumen del contenido incluido en la página 7
User Manual BDL4635E INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place
Resumen del contenido incluido en la página 8
User Manual BDL4635E 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素的名称及含量 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg）（Cd）（Cr 6+）（PBB） （PBDE） 外壳 ○ ○ ○ ○ ○ ○ × × 液晶面板 ○ ○ ○ ○ × ○ ○ ○ ○ ○ 电路板组件 ○ ○ ○ ○ ○ 附件 × (遥控器，电源线，连接线) × 遥控器电池 ○ ○ ○ ○ ○ ○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下 ◦ ×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求 ◦ 环保使用期限 此标识指期限(十年)，电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外 泄或突变，电子信息产品用户使用该电子信
Resumen del contenido incluido en la página 9
User Manual BDL4635E NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR D
Resumen del contenido incluido en la página 10
User Manual BDL4635E Contents The BDL4635E monitor pack* should include: • LCD monitor • Screw for Clamper (To prevent from falling) x 2 • Power cord (1.8 m) • Main switch cover • VGA Signal Cable (1.8 m) • Screw for Main Switch cover x 2 • DVI-HDMI Cable (1.8 m) • Cable Holder x 2 • User Manual • BNC TO RCA adapter x 5 • Remote Control and AAA Batteries • Logo guider • Clamper x 2 (To prevent from falling) • Cable belt x 3 (Fo
Resumen del contenido incluido en la página 11
User Manual BDL4635E Elements Name and Functions Control Panel Buttons POWER button ( ) : To switch the power on/off. MUTE button : To switch the audio mute ON/OFF. INPUT button : To set the function while OSD menu is on or to toggle switch between [HDMI1], [HDMI2], [PC-A], [CVI], [VIDEO] and [VIDEO] while OSD menu is off. PLUS (+) button : To increase the adjustment while OSD menu is on, or to increase the audio output level while the OSD menu is off. MINUS (-)
Resumen del contenido incluido en la página 12
User Manual BDL4635E Terminal Panel AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer, VCR or DVD player. AUDIO OUT To output the audio signal from the AUDIO IN 1,2 and 3 jack. EXTERNAL CONTROL (mini D-Sub 9 pin) This is for serial connection when multiple BDL4635E monitors are connected. To achieve the remote control through RS232 command (refer to the RS232 remote
Resumen del contenido incluido en la página 13
User Manual BDL4635E Remote Control SET button To activate the setting with OSD menu. AUTO ADJUST button To execute the AUTO ADJUST function. MUTE button To turn the mute function on/off. VIDEO SOURCE button To set the video source by toggle selection from [HDMI1], [HDMI2], [PC-A], [CVI], [VIDEO] and [VIDEO]. AUDIO SOURCE button To set the audio source by toggle selection from [AUDIO1] to [AUDIO2], [AUDIO3] and [HDMI]. Note
Resumen del contenido incluido en la página 14
User Manual BDL4635E Operating Range for the Remote Handling the remote control Control * Do not subject to strong shock. * Do not allow water or other liquid to splash the remote control. Point the top of the remote control toward the LCD monitor's remote If the remote control gets wet, wipe it dry immediately. sensor during button operation. * Avoid exposure to heat and steam. Use the remote control within a distance of about 7 m/23 ft from the * Other than to ins
Resumen del contenido incluido en la página 15
User Manual BDL4635E How to Mount or Attach Table stand to the LCD Monitor You can install the LCD monitor in one of the following two ways: Way 1: Attach and remove the optional Table stand How to install Table stand 1. Please turn the monitor off. 2. After inserting Table stand in guide block, fasten the thumbscrews on both sides of the monitor. NOTE: Install the Table stand with their longer portions directing to the front. Screws
Resumen del contenido incluido en la página 16
User Manual BDL4635E To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage. As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor(BDL4635E: approx. 34.6 kg). Screw hooks (commercially available), of ring type rather than C-shaped screw
Resumen del contenido incluido en la página 17
User Manual BDL4635E Ventilation Requirements for enclosure locating To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 14
Resumen del contenido incluido en la página 18
User Manual BDL4635E Setup Procedure 3. Connect to external equipment 1. Install the system on the right location • To protect the connected equipment, turn off the main power CAUTION: before making connections. THE LCD MONITOR MUST BE MOVED OR INSTALLED BY • Please refer to section “Connectivity” P.18~P.22 for operations.. TWO OR MORE PERSONS. Failure to follow this caution may result in injury if the LCD 4. Connect power cord monitor falls. • The
Resumen del contenido incluido en la página 19
User Manual BDL4635E 9. Adjust the image Make adjustments to brightness or contrast if required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “POWER SAVE”, “PANEL SAVING”, “SIDE BORDER COLOR”, “DATE AND TIME”, “SCHEDULE”. 11. To prevent the main power switch from being changed To prevent the possibility of main power switch being carelessly pushed, please attach the main switch cove
Resumen del contenido incluido en la página 20
User Manual BDL4635E Install the LCD Monitor in Portrait Mode BDL4635E can be installed in portrait position, under the following conditions: Caution: Portrait mode is effective only when wall-mounted or ceiling-mounted. The Table stand can not be used for the monitor in portrait position. Placing the monitor in portrait position, will shorten the average life of the LCD backlight. Operational Environment (Temperature) shall be limited, as shown below: Operatio
