Resumen del contenido incluido en la página 1
Philips LCD Monitor Electronic User’s Manual
Resumen del contenido incluido en la página 2
• Safety Precautions and Maintenance Safety and Troubleshooting Information • FAQs • Troubleshooting Safety precautions and maintenance • Regulatory Information WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Operation: Keep the monitor out of direct sunlight
Resumen del contenido incluido en la página 3
IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the “burne
Resumen del contenido incluido en la página 4
• Safety and Troubleshooting FAQs (Frequently Asked Questions) • General FAQs • Compatibility with Other Peripherals General FAQs • LCD Panel Technology Q1: When I install my monitor what should I do if the screen shows 'Cannot display this • Ergonomics, Ecology and Safety video mode'? Standards • Troubleshooting A: Recommended resolution for Philips 19": 1440x900 @60Hz. • Regulatory Information Unplug all cables, then connect your PC to the monitor that you used previously
Resumen del contenido incluido en la página 5
A: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments? A: Simply press the OK button, then select 'Reset' to recall all of the original factory settings. Q6: Will the LCD screen be resistant to scratches? A: In general it is recommended that the panel surface is not subjected to excessive shocks and i
Resumen del contenido incluido en la página 6
expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K. Q9: Can the Philips LCD Monitor be mounted on the wall? A: Yes. Philips LCD monitors have this optional feature. For standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories. We recommend to contact your Philips sales represent
Resumen del contenido incluido en la página 7
RETURN TO TOP OF THE PAGE Ergonomics, Ecology and Safety Standards Q13: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? A: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter- imaging" or "ghost imaging" will
Resumen del contenido incluido en la página 8
Troubleshooting • Safety and Troubleshooting • FAQs This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips • Common Problems customer service representative. • Imaging Problems Common Problems • Regulatory Information Having this problem Check these items Make sure the power cord is plugged into the power outlet and into the back of the monitor. No Picture First, ensure that
Resumen del contenido incluido en la página 9
Vertical flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. Horizontal flicker appears Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. Adjust the contrast and brightness on On-Screen Display. image appears blurred, indistinct or too dark Uninterrupted display of still or static images over an extended period may cause " burn in", also known as "after-
Resumen del contenido incluido en la página 10
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE
Resumen del contenido incluido en la página 11
• TCO5.0 Information Regulatory Information • Recycling Information for Customers Available for selective models Waste Electrical and Electronic Equipment- • WEEE • CE Declaration of Conformity TCO 5.0 Information • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • FCC Declaration of Conformity • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • Polish Center for Testing and Certifi
Resumen del contenido incluido en la página 12
system (EMAS or ISO 14001) Very low energy consumption both in on-and standby mode Restrictions on chlorinated and brominated flame retardants, plasticizers and polymers Restrictions on heavy metals such as cadmium, mercury and lead (RoHS compliance) Both product and product packaging is prepared for recycling The brand owner offers take-back options The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts,
Resumen del contenido incluido en la página 13
Like all LCD products, this set contains a lamp with Mercury. Please dispose of according to all Local, State and Federal laws. For the disposal or recyciing information, contact www.mygreenelectronics.com or www.eiae.org. RETURN TO TOP OF THE PAGE EPEAT “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA.
Resumen del contenido incluido en la página 14
- 2004/108/EC (EMC Directive) and is produced by a manufacturing organization on ISO9000 level. The product also comply with the following standards - ISO13406-2 (Ergonomic requirement for Flat Panel Display) - GS EK1-2000 (GS specification) - prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display) - MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields) - TCO'03, TCO Displays 5.0 (Requirement for Environment Labelling of Ergonomics, Energy, E
Resumen del contenido incluido en la página 15
following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied
Resumen del contenido incluido en la página 16
Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux commu
Resumen del contenido incluido en la página 17
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/ T-42107 and PN-89/E-06251. RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE.
Resumen del contenido incluido en la página 18
Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETURN TO TOP OF THE PAGE Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgele
Resumen del contenido incluido en la página 19
RETURN TO TOP OF THE PAGE End-of-Life Disposal Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your sales representative. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and
Resumen del contenido incluido en la página 20
RETURN TO TOP OF THE PAGE Lead-free guarantee Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. RETURN TO TOP OF THE PAGE
