Resumen del contenido incluido en la página 1
INSTALLATION & MAINTENANCE GUIDE
MD212MC
MD213MC
MD213MG
Resumen del contenido incluido en la página 2
Index Warning, Caution ........................................................................................................................ English-1 Registration Information .............................................................................................................. English-2 Recommended use ..................................................................................................................... English-3 Contents................................................
Resumen del contenido incluido en la página 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISC
Resumen del contenido incluido en la página 4
Registration Information Declaration Declaration of the Manufacturer Means of Conformity NEC Display Solutions Europe GmbH declares that this product is in conformity with the essential requirements and provisions of Device Classification: Class I, non-measuring function the Council Directive 93/42/EEC and conform to the applicable Applicable Rules: Annex IX, Rules 1.4 (Section 1) clauses of the following standards: and 1.1 (Section 3) – EN 60601-1 Product Name: MD212MC/MD213MC – EN 60601-1-2 21
Resumen del contenido incluido en la página 5
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet slots, as
Resumen del contenido incluido en la página 6
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm. • Rest
Resumen del contenido incluido en la página 7
Quick Reference Guide Contents Your new NEC monitor box* should contain the following: • MD212MC/MD213MC/MD213MG monitor with tilt/swivel/pivot/height adjust stand • Power Cord 1 •Video Signal Cable (DVI-D to DVI-D cable)* • Quick Reference Guide • CD-ROM x 2 • Cable Cover Power Cord (Type of power cord included will depend on the where the LCD monitor is to be shipped) CD-ROM x 2 Quick Reference Guide DVI-D to DVI-D cable Cable Cover * Remember to save your original box and packing material t
Resumen del contenido incluido en la página 8
Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller is required which can output a resolution of 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for MD212MC and 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) for MD213MC/MD213MG. We recommend using a digital input. 1. Turn off the power to your computer. 2
Resumen del contenido incluido en la página 9
Figure C.3 Figure C.4 8. Hold all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover off as shown in Figure D.2. 9. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet. NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. Figure D.1 Figure D.2 10. Turn on the monitor with power switch on the top (Portrait) or left side (Landscape) of th
Resumen del contenido incluido en la página 10
Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your fingers. To raise the screen, place hands on each
Resumen del contenido incluido en la página 11
Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To prepare the monitor for alternate mounting purposes: • Refer to instructions included with the flexible arm for detailed instructions. •To fulfill the safety requirements the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of the monitor. Remove Monitor Stand 1. Remove the cable cover. 2. Disconnect all cables. 3. Place hands on each side of the mon
Resumen del contenido incluido en la página 12
Controls The OSD (On-Screen Display) control buttons are located on the back of the monitor: To access OSD menu, press the EXIT button. To change signal input, press the SELECT button. NOTE: OSD must be closed in order to change signal input. 7 8 9 10 6 5 4 3 2 1 1LED Indicates that the power is on. 2 RESET Resets the OSD back to factory settings. NOTE: With no input signal on the screen, press RESET button for at least 3 seconds to display the visual inspection (grayscale) drawing and check the
Resumen del contenido incluido en la página 13
Luminance/Contrast Controls LUMINANCE Adjusts the overall image and background screen luminance. When LUMINANCE is adjusting the numerical values blinks. AUTO CONTRAST (Analog input only) Adjusts the image displayed for non-standard video inputs. BLACK LEVEL (Analog input only) Adjust the black level manually. Auto Adjust (Analog input only) Automatically adjusts the Image Position and V.Size (H.Size) settings and Fine settings. Image Controls LEFT / RIGHT Controls Horizontal Image Position with
Resumen del contenido incluido en la página 14
EXPANSION Sets the zoom method. FULL: The image is expanded to 1200 x 1600 (in portrait mode) or 1600 x 1200 (in landscape mode) for MD212MC and 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) for MD213MC/MD213MG, regardless of the resolution. ASPECT: The image is expanded without changing the aspect ratio. OFF: The image is not expanded. CUSTOM: Refer to the ADVANCED OSD Controls menu section of the user’s manual for detailed instructions. When digital QXGA (1536 x 2048 or 204
Resumen del contenido incluido en la página 15
OFF MODE This function allows the monitor to enter into a power saving mode after a period of inactivity. The OFF MODE has two settings. OFF: Monitor does not go into power save mode when the input signal is lost. STANDARD: Monitor enters power save mode automatically when the input signal is lost. UNIFORMITY This function electronically compensates for the slight variations in the white uniformity level, as well as for deviations in color that may occur throughout the display area of the screen
Resumen del contenido incluido en la página 16
FACTORY PRESET Selecting Factory Preset allows you to reset all OSD control settings (LUMINANCE, BLACK LEVEL, IMAGE CONTROL, COLOR CONTROL SYSTEM, SHARPNESS, OFF MODE, OSD LEFT/RIGHT, OSD UP/DOWN, OSD TURN OFF) back to the factory settings. Individual settings can be reset by highlighting the control to be reset and pressing the RESET button. Information Provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vert
Resumen del contenido incluido en la página 17
Advanced OSD • When OSD is off, push the “RESET” and “EXIT” button at the same time. •You will see the Advanced menu. This menu is larger than the normal OSD. • Push the “EXIT” button. To make an adjustment, ensure that the tag is highlighted, then press “SELECT”. To move to another tag, press “EXIT”, then press “Left” or “Right” to highlight another tag. Tag1 Luminance Adjusts the overall image and screen background luminance. Press
Resumen del contenido incluido en la página 18
Tag3 Auto Adjust Automatically adjusts the Image Position and V.Size (H.Size) settings and Fine settings. (Analog input only) Press “SELECT” to activate Auto Adjustment. Signal Adjust Determines when the auto adjustment is activated automatically. (Analog input only) The choices are “SIMPLE” and “FULL”. Press “Left” or “Right” to select. V.Size (H.Size), Fine, H/V Position Contrast SIMPLE O X FULL O O O: Automatic Adjustment X: No Automatic Adjustment NOTE: Automatic Adjustment does not work a
Resumen del contenido incluido en la página 19
H.ZOOM The image is expanded from 1 to 3 times in the horizontal (H. EXPANSION) direction by (Available in Custom 0.01 increments. Expansion mode only) V.ZOOM The image is expanded from 1 to 3 times in the vertical (V. EXPANSION) direction by (Available in Custom 0.01 increments. Expansion mode only) ZOOM POS. Sets the point from which the screen will be expanded when either H.ZOOM or V.ZOOM is (Available in Custom selected as the expansion method. Options are CENTER and LEFT TOP. Expansion mode
Resumen del contenido incluido en la página 20
Tag7 Sharpness This is a digital capability for keeping a crisp image at all signal timings. It continuously adjusts to maintain as distinct or as soft an image as you prefer and is set independently according to different timings. Press “Left” or “Right” to adjust. DVI Selection This function selects the DVI input mode. When the DVI selection has been changed, you must restart your computer. Press “Left” or “Right” to select. AUTO: By using the DVI-D to DVI-D cable, the DVI SECTION is DIGITAL.
