Resumen del contenido incluido en la página 1
NEC NEC LCD LCD Se Seri rie es s
®
MultiSync
MultiSync
™
™
LCD2010X
LCD2010X
2010X.wpc 1 7/13/00, 5:01 PM
Register your
product online at
www.necmitsubishi.com/
productregistration
Resumen del contenido incluido en la página 2
Index Warning .................................................................................. 1 Contents ................................................................................... 2 Quick Start ............................................................................ 3-7 Controls .............................................................................. 8-11 Recommended Use............................................................. 12-13 Specifications ......................
Resumen del contenido incluido en la página 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Resumen del contenido incluido en la página 4
Contents You can register your product online at www.necmitsubishi.com/productregistration ® Your new NEC-Mitsubishi MultiSync Monitor box* should contain the following: • MultiSync Monitor with tilt/ • Video Signal Cable (15-pin mini D-SUB male to DVI) swivel/pivot stand • Video Signal Cable (DVI-D to DVI-D cable) ™ MultiSync LCD2010X • NEC LCD Setup Software, Pivot Software and other • Power Cord helpful files • User’s Manual Video signal cable with 15-pin mini D-SUB to DVI cable Video signal
Resumen del contenido incluido en la página 5
Quick Start ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI signal cable to the connector of the display card in your system (Figure A.2). To connect a secondary PC with analog output, connect the 15-pin m
Resumen del contenido incluido en la página 6
Quick Start cont. Figure A.1 Figure A.2 Macintosh Cable Adapter (not included) Note: Some Macintosh systems do not require a Mactintosh cable adapter Figure B.1 4 2010X.wpc 6 7/13/00, 5:01 PM
Resumen del contenido incluido en la página 7
Quick Start cont. Connector Cover DVI Mini D-SUB Power Cord Figure C.1 Power Button Figure D.1 Figure E.1 5 5 2010X.wpc 7 7/13/00, 5:01 PM
Resumen del contenido incluido en la página 8
Controls Quick Start cont. Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Figure RL.1 Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest
Resumen del contenido incluido en la página 9
Quick Start cont. Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mount- ing purposes: 1. Disconnect all cables. Figure TS.1 2. Place hands on each side of the monitor and lift up to the highest position (Figure RL.1). 3. Place monitor face down on a non-abrasive surface. (Place the screen on a 2-inch platform so that the stand is parallel with th
Resumen del contenido incluido en la página 10
Controls OSM™ (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons ( , , , ) or the PROCEED button. To mute sound function, press the EXIT button. To rotate OSM between Landscape and Portrait modes, press the RESET button. To change DVI/D-SUB signal input, press the PROCEED button. NOTE: OSM menu must be closed in order to rotate. Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM main m
Resumen del contenido incluido en la página 11
Controls cont. AUTO ADJUST Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD. Image Adjust Controls (Analog Input Only) H.SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity and image stability by increasing or decreasing this setting. AUTO ADJUST Automatically adjusts H. SIZE and FINE settings. ® AccuColor Control Systems Five color presets select the desired color setting. Each color setting is a
Resumen del contenido incluido en la página 12
Controls cont.ols LAST DETECT: The video input has to be switched to the “LAST DETECT” mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor will automatically switch to the new video source. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source i
Resumen del contenido incluido en la página 13
Controls cont.ols Information DISPLAY MODE: Provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vertical frequencies. MONITOR INFO: Indicates the model and serial numbers of your monitor. ™ OSM Warning NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. The PROCEED bu
Resumen del contenido incluido en la página 14
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
Resumen del contenido incluido en la página 15
Recommended Use cont. CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. The ® o
Resumen del contenido incluido en la página 16
Specifications ® ™ Monitor MultiSync LCD2010X Notes Specifications Monitor LCD Module Diagonal: 20.1 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 20.1 inch liquid crystal display (LCD); 0.31 mm dot ™ 2 Native Resolution (Pixel Count): Landscape: 1280 x 1024 pitch; XtraView technology; 250cd/m white Portrait: 1024 x 1280 luminence; 250:1 contrast ratio, typical ™ Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: TMDS Sync: Separate sync. TTL Level Horizontal sync.
Resumen del contenido incluido en la página 17
Features ambix™ Technology: Dual input technology allowing both analog and digital inputs off of one connector (DVI-I) as well as additional legacy analog support off of a traditional 15- ® pin VGA connector. Provides traditional MultiSync technology compatibility for analog as well as TMDS™-based (Transition Minimized Differential Signaling) digital compatibility for digital inputs. TMDS-based digital interfaces include DVI-D,DFP and P&D. DVI-I: The integrated interface ratified by the Digital
Resumen del contenido incluido en la página 18
Features cont. ™ IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace. Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the resolution required. ™ FullScan Capability: Allows you to use t
Resumen del contenido incluido en la página 19
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recom- mend
Resumen del contenido incluido en la página 20
References • BBS (978) 742-8706 NEC-Mitsubishi Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: NEC-Mitsubishi Remote Bulletin Board System Internet e-mail: tech-support@necmitsubishi.com Internet ftp site: ftp.necmitsubishi.com World Wide Web: http://
