Resumen del contenido incluido en la página 1
NEC MultiSync Series
®
®
MultiSync
MultiSync
50/70/90
50/70/90
User’s Manual
User’s Manual
15500251.wpc 1 5/7/99, 12:54 PM
You can
register your
product online at
www.nectech.com/
productregistration
Resumen del contenido incluido en la página 2
Index Warning 1 Contents 2 Quick Start 3-4 Controls 5-6 Recommended Use 7-8 Specifications 9-11 Features 12 Troubleshooting 13 References 14 Limited Warranty 15 Avertissement 17 Contenu 18 Mise en marche rapide 19-20 Commandes 21-22 Usage recommandé 23-24 Caractérisitques techniques 25-27 Fonctions 28 Guide de dépistage des pannes 29 Références 30 Garantie limitée 31 15500251.wpc 2 5/7/99, 12:54 PM
Resumen del contenido incluido en la página 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Resumen del contenido incluido en la página 4
® ® MultiSync MultiSync 50/70/90 50/70/90 User’s M User’s Manual anual NEC MultiSync Series You can register your product online at www.nectech.com/ productregistration Contents You can register your product online at www.nectech.com/productregistration ® Your new NEC Technologies MultiSync monitor box* should contain the following: • MultiSync Monitor with tilt/swivel base MultiSync 50, 70 or 90 • Power Cord • Captive Signal Cable • User’s Manual Captive Signal Cable User’s Manual Power Cor
Resumen del contenido incluido en la página 5
Quick Start ® To attach the MultiSync monitor to your system, follow these in- structions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the monitor conne
Resumen del contenido incluido en la página 6
Quick Start cont. Captive Signal Cable Mac Adapter Computer (Not included) 15-pin mini D-SUB Figure B.1 Power Outlet Power Cord Figure C.1 Figure D.1 4 15500251.wpc 6 5/7/99, 12:54 PM
Resumen del contenido incluido en la página 7
Controls ™ OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: SELECT Enters and exits the OSM menu. CONTROL –/+ Selects one of the controls and increases or decreases the adjustment. RESET Resets the highlighted control to the factory setting. Adjusts the overall image and background screen brightness. Adjusts the image brightness in relation to the background. Red Color Contrast: Adjust the red contrast of the display Green Color Contrast: Adjust the green
Resumen del contenido incluido en la página 8
Controls cont. Increases or decreases the tilt of the sides either to the left or right. Rotates the entire display clockwise or counterclockwise. Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized. Caution: Please allow a minimum of 20 minutes to elapse between uses of the Deg
Resumen del contenido incluido en la página 9
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet s
Resumen del contenido incluido en la página 10
Recommended Use cont. CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches. • Rest your eyes periodically
Resumen del contenido incluido en la página 11
Specifications ® Monitor MultiSync 50 Notes Specifications Monitor Picture Tube Diagonal: 15 inch 90 deflection, 0.28 mm trio dot pitch, Viewable Image Size: 13.8 inch medium short persistence phosphor, Radius: 1080 mm multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and ® OptiClear screen surface. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/
Resumen del contenido incluido en la página 12
Specifications cont. ® Monitor MultiSync 70 Notes Specifications Monitor Picture Tube Diagonal: 17 inch 90 deflection, 0.28 mm trio dot pitch, Viewable Image Size: 16.0 inch medium short persistence phosphor, Radius: 1210 mm multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and ® OptiClear screen. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composite sync. (Positive/Ne
Resumen del contenido incluido en la página 13
Specifications cont. ® Monitor MultiSync 90 Notes Specifications Monitor Picture Tube Diagonal: 19.5 inch 90 deflection, 0.26 mm trio dot pitch, Viewable Image Size: 18.0 inch medium short persistence phosphor, Radius: 1360 mm multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and ® OptiClear screen surface. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Display Colors Ana
Resumen del contenido incluido en la página 14
Features ® OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat square ® technology CRT, a high contrast screen with 0.28 mm (MultiSync 50/70) and 0.26 mm (MultiSync 90) trio dot pitch delivers crisp, clean text and graphics. Invar Shadow Mask: Holes in the thin metal sheet behind the glass of the CRT surface correspond to each phosphor dot on the inner surface of the CRT’s faceplate, allowing th
Resumen del contenido incluido en la página 15
Troubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins. Image is scrolling or unstable • Signal cable should be completely attached to the computer. • Check pin assignments and signal timings of the monitor and your display card with respect to recommended timings and pin assignments
Resumen del contenido incluido en la página 16
References • BBS (978) 742-8706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@nectech.com Internet ftp site: ftp.nectech.com World Wide Web: http://www.nectech.com Product Registration: http://www.nectec
Resumen del contenido incluido en la página 17
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NECTECH’s sole option) any part of the enclosed unit which proves defective for a period of one (1) year from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or units may be new or refurbished and will meet specifications of t
Resumen del contenido incluido en la página 18
Notes 16 15500251.wpc 18 5/7/99, 12:54 PM
Resumen del contenido incluido en la página 19
AVERTISSEMENT AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE QUE SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À HAUTE TENSION. CONFIER TOUS TRAVAUX À DU PERSONNEL TECHNIQUE QUALIFIÉ. ATTENTION RISQUE DE DÉCHARGE ÉLECTRIQUE • NE PAS OUVRIR ATTENTION : POUR ÉVITER TOUT RISQU
Resumen del contenido incluido en la página 20
® ® MultiSync MultiSync 50/70/90 50/70/90 User’s M User’s Manual anual NEC MultiSync Series You can register your product online at www.nectech.com/ productregistration Contenu Votre produit peut être enregistré sur Internet à l’adresse http://www.nectech.com/productregistration La boîte de votre nouveau moniteur NEC Technologies ® MultiSync contient : • Moniteur MultiSync avec socle inclinable/rotatif MultiSync 50, 70 au 90 • Cordon d'alimentation • Câble de signal captif • Mode d'emploi Câ
