Resumen del contenido incluido en la página 1
User's Manual
USER’S MANUAL
MANUEL UTILISATEUR
MANUAL DEL USUARIO
1-1
Resumen del contenido incluido en la página 2
Important Information ..................................................................................................... English-2 Safety Precautions, Maintenance & Recommended Use .............................................. English-4 Contents ......................................................................................................................... English-5 Parts Name and Functions Control Panel ...............................................................................
Resumen del contenido incluido en la página 3
Important Information DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc. Address: 9351 Jeronimo Road, Irvine, California 92618 U.S.A. Tel. No.: +1 - (949) 465-6000 Type of Product: Com
Resumen del contenido incluido en la página 4
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Resumen del contenido incluido en la página 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE Immediately unplug your monitor from the wall outlet and refer THE FOLLOWING WHEN SETTING UP AND USING servicing to qualified service personnel under the following THE MDT402S / MDT461S LCD COLOR MONITOR: conditions: • DO NOT OPEN THE MONITOR. There are no user • When the power supply cord or plug is damaged. serviceable parts inside and opening or removing covers • If liquid has been spilled, or objects have
Resumen del contenido incluido en la página 6
Contents Your new MDT402S / MDT461S monitor box* should contain the following: • LCD monitor • CD-ROM • Power Cord (3m) for North America • Band x 2 • Power Cord (3m) for EU • Ferrite Core x 2 • Video Signal Cable — SC-B113 (4m) • Stand for the Independence x 2 • User’s Manual • Thumbscrew for stand x 2 • Wireless Remote Control and AA Batteries • Main switch cover • Clamper x 3 • Speaker Plug x 1set(Required for optional Loudspeakers) • Screw (M4 x 8) x 4 Thumbscrew for stand x 2 Stand for the
Resumen del contenido incluido en la página 7
Parts Name and Functions Control Panel 9 EXIT INPUT MUTE 10 Button Location EXIT INPUT MUTE ON OFF 8 7 6 5 4 3 2 1 1 POWER button ( ) 7 DOWN ( ) button Switches the power on/off. See also page 18. Activates the OSD menu when the OSD menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSD menu. 2 MUTE button Switches the audio mute ON/OFF. 8 EXIT button Activates the OSD menu when the OSD menu is turned-off. 3 INPUT button Acts as EXIT button to mov
Resumen del contenido incluido en la página 8
Terminal Panel 1 AC IN connector 7 AUDIO IN 1,2,3 Connects with the supplied power cord. Input audio signal from external equipment such as a computer, VCR or DVD player. 2 RGB 1 IN (DVI-D) To input digital RGB signals from a computer or HDTV 8 AUDIO OUT device having a digital RGB output. Output the audio signal from the selected AUDIO IN source. * This connector does not support analog input. 9 VIDEO INPUT/OUTPUT CONNECTOR 3 RGB 2 IN (mini D-Sub 15 pin) VIDEO IN connector (BNC and RCA): Input
Resumen del contenido incluido en la página 9
Wireless Remote Control 6 MUTE button To switch the mute function on/off. 7 VOLUME UP button Increases the audio output level. 8 VOLUME DOWN button Decreases the audio output level. 9 PIP (Picture in Picture) button ON/OFF button: Toggle switches between PIP, POP, side-by-side (aspect) and side-by-side (full). See page 23. INPUT button: Selects the “picture in picture” input signal. CHANGE button: Replaces to the main picture and sub picture. 10 STILL button ON/OFF button: To switch the still pi
Resumen del contenido incluido en la página 10
Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor’s Handling the remote control remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. * Do not subject to strong shock. from the front of the LCD monitor’s remote control sensor * Do not allow water or other liquid to splash the remote and at a horizontal and vertical angle of within 30° within a control. If the remote control gets wet, wipe it dry distanc
Resumen del contenido incluido en la página 11
Setup Procedure 1. Determine the installation location 3. Connect external equipment (See pages 13-17) CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. • To protect the connected equipment, turn off the main power before making connections. Installing your LCD display must be done by a qualified • Refer to your equipment user manual. technician. Contact your dealer for more information. 4. Connect the supplied power cord CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE B
Resumen del contenido incluido en la página 12
10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “SCREEN SAVER” (See page 24), “SIDE BORDER COLOR” (See page 24), “DATE & TIME” (See page 28), “SCHEDULE” (See page 28). 11. When the monitor is installed in the portrait position • Remove the stands (feet). • Left edge should be the upper edge from front view. 12. Installing and removing stand Speaker terminal How to install stand 1. Please turn monitor off
Resumen del contenido incluido en la página 13
How to Mount and Attach Options to the LCD Monitor You can attach mounting accessories to the LCD monitor in 3. Ventilation Requirements for enclosure one of the following two ways: mounting To allow heat to disperse, leave space between surrounding 1. In the upright position objects as shown in the diagram below. 4. To avoid falling down Fasten the LCD monitor to wall using a cord or chain, which is sufficient to support the weight of the LCD monitor (approx. MDT402S: 29.0kg / MDT461S: 32.8kg).
Resumen del contenido incluido en la página 14
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram Personal computer LCD monitor DVD player Personal computer VCR Equipment with LCD monitor (second monitor) digital interface Attaching the Ferrite Core Mounting Position of Ferrite Core Attach the Ferrite Core to PC Audio Cable. Use of the cable without mounting the ferrite core will result
Resumen del contenido incluido en la página 15
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards may not display an image correctly. Connect the LCD Monitor to a Personal Computer • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin). • To connect the RGB 3 connector (BNC) on the LCD monitor, use a signal cable which is available separat
Resumen del contenido incluido en la página 16
Connecting with Digital Interface Equipment Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) standard. Connect the LCD Monitor to a Computer with a Digital Output • The RGB 1 IN connector also accepts a DVI-D cable. • Input TMDS signals conforming to DVI standards. • To maintain display quality, use a cable with a quality prescribed by DVI standards. • The AUDIO IN 1,2 and 3 can be used for audio input. For connect
Resumen del contenido incluido en la página 17
Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided). Some DVD player may have different conne
Resumen del contenido incluido en la página 18
Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner’s manual for more information. Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier. • Do not reverse the audio left and right jacks. • The AUDIO IN is used for audio input. • The AU
Resumen del contenido incluido en la página 19
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on or off using the following three options: 1. Pressing the power button. Note: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor. Power Button 2. Using the remote control. Note: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor. 3. Pressing the Main
Resumen del contenido incluido en la página 20
NORMAL: Display by the inputed signal aspect ratio by PC Power Indicator signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO signal. Status FULL: Display in entire screen. Power ON Green WIDE: Expand 16:9 letter box signal to entire screen. Power OFF Red ZOOM (DYNAMIC): Expand 4:3 pictures to the entire screen with non-linearity. (Some around image will be cut by expansion.) Power Standby when Red On “SCHEDULE” is enable Green Blinking ZOOM Power Standby Red, Green Image can be expanded be
