Resumen del contenido incluido en la página 1
MultiSync LCD1760VM
User’s Manual
Resumen del contenido incluido en la página 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS IN
Resumen del contenido incluido en la página 3
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 No. 950. Ce produit porte la marque ‘C-UL’ et se conforme
Resumen del contenido incluido en la página 4
Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1760VM monitor with tilt base • Power Cord •Video Signal Cable • Audio Cable • User’s Manual • CD ROM (includes complete User’s Manual in PDF format). To see the User’s Manual, Acrobat Reader 4.0 must be installed on your PC. User’s Manual Power Cord Audio Cable Video Signal Cable CD ROM * Remember to save your original box and packing material to transport or ship the monitor. Quick Start To attach the
Resumen del contenido incluido en la página 5
Figure A.1 Macintosh Cable Adapter Figure B.1 Figure B.2 Figure C.1 (not included) Input1 (D-Sub) Input2 (DVI) Cable cover Figure D.1 Figure D.2 Input1 (D-Sub) Input2 (DVI) Figure D.3 Figure E.1 English-4
Resumen del contenido incluido en la página 6
Vacation Switch Power Button Figure F.1 Raise and Lower Monitor Screen The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). Figure RL.1 Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Figure TS.1 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2.
Resumen del contenido incluido en la página 7
4. Remove the hinge cover. (Figure R.1 and Figure R.2) 5. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.3) the monitor is now ready for mounting in an alternate manner. 6. Connect the AC cord, signal cable and audio cable to the back of the monitor (Figure R.4). 7. Reverse this process to reattach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing monitor stand. Figure R.1 Figure R.2 Figure R.3 Eng
Resumen del contenido incluido en la página 8
Figure R.4 NOTE: This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark). Replace screws Thickness of bracket (arm) 2.0 ~ 3.2 mm Tighten all screws 100 mm 100 mm 4 SCREWS (MAX depth: 8.5 mm) If use other screw, ch
Resumen del contenido incluido en la página 9
Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons (<, >, -, +, EXIT). To change signal input, press the SELECT button. NOTE: OSM must be closed in order to change signal input. Control Menu EXIT Exits the OSM controls. Exits to the OSM main menu. < / > Moves the highlighted area left/right to select control menus. Moves the highlighted area up/down to select one of the controls. - / + Moves t
Resumen del contenido incluido en la página 10
Position Controls (Analog input only) LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD. DOWN/UP Controls Vertical Image Position within the display area of the LCD. H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. Should the “AUTO Adjust function” do not give you a satisfactory picture setting, a further tuning can be performed using the “H.Size” function (dot clock). For this a Moiré test pattern could be used. This function may alter
Resumen del contenido incluido en la página 11
Tools LANGUAGE OSM control menus are available in seven languages. OSM POSITION You can choose where you would like the OSM control image to appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu left, right, down or up. OSM TURN OFF The OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset cho
Resumen del contenido incluido en la página 12
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabine
Resumen del contenido incluido en la página 13
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm. • Rest
Resumen del contenido incluido en la página 14
Specifications Monitor Specifications MultiSync LCD1760VM Monitor Notes LCD Module Diagonal: 43.2 cm/17 inches Active matrix; thin film transistor (TFT) Viewable Image Size: 43.2 cm/17 inches liquid crystal display (LCD); 0.264 mm 2 Native Resolution (Pixel Count): 1280 x 1024 dot pitch; 250cd/m white luminence, typical; 350:1 contrast ratio, typical. Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync.TTL Level Horizontal sync. Positive/Negative Vertical sync. Pos
Resumen del contenido incluido en la página 15
Features sRGB Colour Control: A new optimized colour management standard which allows for colour matching on computer displays and other peripherals. The sRGB, which is based on the calibrated colour space, allows for optimal colour representation and backward compatibility with other common colour standards. Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The monitor’s small footprint and low weight allow it
Resumen del contenido incluido en la página 16
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON Position. Front power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and y
Resumen del contenido incluido en la página 17
TCO’99 Congratulations! You have just purchased a Lead** TCO’99 approved and labeled product! Your choice Lead can be found in picture tubes, display screens, solders and has provided you with a product developed for capacitors. Lead damages the nervous system and in higher professional use. Your purchase has also doses, causes lead poisoning. contributed to reducing the burden on the TCO’99 requirement permits the inclusion of lead since no environment and also to the further development of rep
