Resumen del contenido incluido en la página 1
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
USER’S GUIDE
For future reference, record the serial
number of your display monitor in the
space below:
Internet Home Page: http://www.mitsubishi-electric.com.au/
SERIAL No.
®
The serial number is located on the Supplying Windows 95/98/2000 INF File download service, new
rear cover of the monitor. product information, etc.
Resumen del contenido incluido en la página 2
- ii -
Resumen del contenido incluido en la página 3
RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio commu-
Resumen del contenido incluido en la página 4
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: Congratulations! http://www.tco-info.com/ You have just purchased a TCO’99 approved and labelled product! Your choi
Resumen del contenido incluido en la página 5
CONTENTS 1. INTRODUCTION ................................................... 2 1.1 Features ...................................................... 2 CAUTION 1.2 Internal Preset Memory Capability .............. 3 The power cord provided with this monitor is de- 1.3 Power Management Function ..................... 3 signed for safety and must be used with a properly 1.4 DDC ............................................................ 3 grounded outlet to avoid possible electrical shock. 1.5 Locatio
Resumen del contenido incluido en la página 6
1 INTRODUCTION 1 • The monitor complies with Video Electronics Standards Congratulations on your purchase of this high resolution Association (VESA) DDC1/2B(EDID) specification. If color monitor. We designed this monitor to provide you your computer is Plug & Play compliant setup will be with years of reliable trouble-free operation. done automatically. This guide tells you how to connect, adjust and care for your • The CRT provides fine 0.25mm variable aperture grille monitor. This guide a
Resumen del contenido incluido en la página 7
1.2 Internal Preset Memory Capability 1.5 Location Considerations When setting up and using the monitor, keep the following To minimize adjustment needs, the factory has preset in mind: popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the • For optimum viewing, avoid placing the monitor picture size and position are automatically adjusted. All of against a bright background or where sunlight or the factory presets may be overwritt
Resumen del contenido incluido en la página 8
1.9 Quick Operation Chart 1.7 Unpacking To summarize the steps in connecting your computer After you unpack the box you should have all of the items with the color monitor and setting the necessary controls indicated in Figure 1. Save the box and packing materials and switches, refer to the chart below. in case you transport the monitor. 1 2 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION Turn on the color monitor. 3 Turn
Resumen del contenido incluido en la página 9
2 PART NAME 2 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR FRONT SELECT RESET Figure 3 Figure 4 2.2 Function 5. AC POWER CONNECTOR 1. POWER SWITCH: A push-on / push-off switch for AC power. 6. SIGNAL INPUT CONNECTOR: DB9-15P 2. POWER-ON INDICATOR: This indicator illuminates green when AC power is on, and illuminates orange when the monitor is in the power managem
Resumen del contenido incluido en la página 10
3 INSTALLATION AND 3 CONNECTION 3.2.2 Connecting to An Apple Macintosh Computer On the back of the monitor two kinds of plug-in connections are provided: AC power connector for the AC input, DB9- 15P connector for video signal input. Figure 6 shows the signal cable and Adapter (option) to the video port in an Apple Macintosh. 3.1 AC Power Connection The Macintosh Adapter is available that converts the 2 row One end of the AC power cord is connected to the AC D-sub video connector on legacy Maci
Resumen del contenido incluido en la página 11
4 OSD (On Screen Display) 4 FUNCTIONS 4.1 How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. SELECT RESET (1) Turn on the monitor by pressing (2) Display the OSD screen by pressing SELECT (3) Select the item icon on item select screen by pressing (4) Display the item adjustment screen by pressing SELECT (5) Adjust by pressing (6) To turn the OSD screen off, select "exit" and press button SEL
Resumen del contenido incluido en la página 12
4.2 Adjustment Items X: Available Press the Minus Button Press the Plus Button Item Item A B Icon Brightness To decrease the brightness. To increase the brightness. X X To decrease the contrast. To increase the contrast. X X Contrast NOTE Without OSD screen, push to adjust the contrast. To decrease the red contrast. To increase the red contrast. Red Color Control X X Green Color Control To decrease the green contrast. To increase the green contrast. X X To decrease the blue contrast. To
Resumen del contenido incluido en la página 13
Before calling your Authorized Product Support, please check that the items below are properly connected or set. 5 TROUBLESHOOTING In case of using a non-standard signal, please check the 5 pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA- TIONS. ITEMS TO CHECK LOCATION PROBLEM LED On • Contrast and brightness controls • Front (OSD) (Green) • Power switch • Front LED Off • AC power cord disconnected • Rear • Rear • Signal cable discon
Resumen del contenido incluido en la página 14
ITEMS TO CHECK LOCATION PROBLEM • The 2 very faint thin lines across the screen are normal. Two fine horizontal They are caused by the aperture grille stabilization lines are visible on the screen. filaments(Damper Wires) which are required for all aperture grille CRTs’. Aperture Grille Shadow of Damper Wires Electrn Gun Damper Wires Shadow of Damper Wires Aperture Grille Type • A brief vibration or hum sound that is heard just after power up is normal. This is caused by the automatic degaussin
Resumen del contenido incluido en la página 15
6 SPECIFICATIONS 6 Size 43cm/17" (41cm/16" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25mm Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.7V analog RGB INPUT SIGNAL Sync Separate H, V sync., or Composite sync Input Connectors DB9-15P SIGNAL INTERFACE Input Impedance 75Ω (video), 2.2kΩ (sync.) SCANNING Horizo
Resumen del contenido incluido en la página 16
7 WARRANTY 7 IMPORTANT Please keep this Warranty in a safe place. It is valuable. The benefits conferred by this Warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. PC and GRAPHIC 3 YEAR WARRANTY MITSUBISHI MONITORS Please complete and keep with original purchase docket. OWNER’S NAME: ADDRESS: CITY: STATE: POSTCODE: MODEL No: SERIAL No: DATE OF PURCHASE: INVOICE/SALES DOCK
Resumen del contenido incluido en la página 17
b) the product is damaged by the use of a consumable which is not supplied by Mitsubishi Electric Australia or its recognised retailer and which consumable is not of an equivalent standard and quality. c) the product is damaged by exhausted, leaking or used batteries or fails to function correctly as a result of the use of such batteries. d) the product case is opened by a person other than Mitsubishi Electric Australia’s recognised retailer or repairer, or the recognised retailer’s repair agent
Resumen del contenido incluido en la página 18
IMPORTANT NOTICE This recycle symbol may appear on packaging material or components of this product. Cd This symbol is a mandatory requirement in some countries and does not necessarily indicate that the material can be recycled in Australia. The Plastic Identification Code (numbers 1 to 7 in a “chasing arrows triangle”) may also appear on packaging material or components for this product. 1 This symbol is designed to identify the resin type used in the manufacture of the material on which it a
Resumen del contenido incluido en la página 19
- 15 -
Resumen del contenido incluido en la página 20
15500991 Declaration of Conformity - United States only Product Name: 17 in. (43cm) Color Display Monitor Type: N0701 Brand Name: MITSUBISHI This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding this declaration, contact: NEC-Mitsubishi Electronics Dis
