Resumen del contenido incluido en la página 1
L2240p Wide Flat Panel Monitor
User’s Guide
Resumen del contenido incluido en la página 2
Product number 4422-H*6 First Edition (May 2008) © Copyright Lenovo 2008. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are asold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer s
Resumen del contenido incluido en la página 3
Contents Safety information ……………………………………………………………………iii Safety and Maintenance Guidelines ………………...…………………………………iv Chapter 1. Getting started ……………………………….…………………………1-1 Shipping contents ………………………………………………………………………………………..… 1-1 Product overview ………………………………………………………………………………………..… 1-2 Types of adjustments ……………………………………………………………………………………... 1-2 User controls ……………………………………………………………………………………………… 1-3 Cable lock slot ……………………………………………………………………………………………. 1-4 Setting
Resumen del contenido incluido en la página 4
Prije instaliranja ovog proizvoda obavezno pro čitajte sigurnosne upute. sUmGanBt’manli¥tl¥n; muneBlcab;epIþmbBa©Úlkm μviFI 8. iii
Resumen del contenido incluido en la página 5
Safety and Maintenance Guidelines Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. WARNING: Always connect your monitor, the computer, and other equipment to a grounded (earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not diable the power cord grounding feature. The grounding plug is an important safety feat
Resumen del contenido incluido en la página 6
Chapter 1. Getting started This User’s Guide contains detailed information on the ThinkVision™ L2240p Wide Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: ● Setup Poster ● Monitor Safety, Troubleshooting, and Warranty Guide ● Reference a
Resumen del contenido incluido en la página 7
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Resumen del contenido incluido en la página 8
Monitor Pivot - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90°. User controls Your monitor has controls on the front which are used to adjust the display. For information on how to use these controls, please see “Adjusting your monitor image ” on page 2-3. Chapter 1. Getting started 1-3
Resumen del contenido incluido en la página 9
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower right corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before car
Resumen del contenido incluido en la página 10
3. Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the back of the computer. 4. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride fl
Resumen del contenido incluido en la página 11
5. Rotate the head of the monitor into portrait view. 6. Place the cables through the Main Clip. Then fasten the clip. 1-6 L2240p Wide Flat Panel Monitor User’s Guide
Resumen del contenido incluido en la página 12
7. Wrap the Cable Wrapper around the cables. 8. Remove the four rubbers from the stand. Chapter 1. Getting started 1-7
Resumen del contenido incluido en la página 13
9. Replace the Cable Cover. 1 2 10. Power on the monitor and the computer. 11. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. 1-8 L2240p Wide Flat Panel Monitor User’s Guide
Resumen del contenido incluido en la página 14
12. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required if you are using the DVI cable. Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See “Manual image setup” on page 3-2. Registering your option ® Thank you for purchasing this Lenovo product.
Resumen del contenido incluido en la página 15
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For m
Resumen del contenido incluido en la página 16
● Use adequate lighting for the type of work you are performing. ● Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. ● Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscl
Resumen del contenido incluido en la página 17
Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Note: The direct access controls are blue. Table 2-1. Direct access controls Icon Control Description Input Change Switches the video input source. Image Setup Activates automatic image adjustment. Brightness Direct access to Brightness
Resumen del contenido incluido en la página 18
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Descirption Adjustments Adjustments Menu (Analog) (Digital) Same as Analog Adjusts overall brightness Brightness Brightness/ Contrast Adjusts difference between Contrast light and dark areas Control Locked- Moves the image left or Horizontal Position not required for right. digital input Image Position Moves the image up or Vertical Position down
Resumen del contenido incluido en la página 19
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Submenu Descirption Adjustments Adjustments Menu (Analog) (Digital) This monitor can accept video signals through two Same as Analog different connectors. Most desktop computers use Input Signal a D-SUB connector. Select digital among OSD Controls when you use DVI connector. - Selects D-SUB (Analog) - Selects DVI-Digital Shows resolution, refresh rate, and product details. Same as Analog Note:
Resumen del contenido incluido en la página 20
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is
