Resumen del contenido incluido en la página 1
LT2013p Wide Flat Panel Monitor
User’s Guide
Resumen del contenido incluido en la página 2
Product numbers 60A0-MAR1-WW First Edition (January 2013) © Copyright Lenovo 2013. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administra
Resumen del contenido incluido en la página 3
Contents Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii General Safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. íí í iii
Resumen del contenido incluido en la página 5
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. Shipping contents The product package should include the following items: • Setup Poster • Reference and Driver CD • Flat Panel Monitor • Power Cord • USB 2.0 Cable • Analog Cable(for VGA use) Chapter 1. 1-1
Resumen del contenido incluido en la página 6
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2. Align the stand assembly bracket to the monitor. 3. Insert the bracket towards monitor until it locks in place. Note: To install a VESA mount, please see "Wall Mounting (Optional)"on page 2-11. Chapter 1
Resumen del contenido incluido en la página 7
30° Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. 0° Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle. Chapter 1. 1-3 5°
Resumen del contenido incluido en la página 8
Height Adjustment For height adjustment, user needs to press down or lift up the monitor. Monitor Pivot - Adjust the screen position before rotating the monitor screen. (Make sure that the monitor screen ascent to its highest point, and it inclines backward at 30°.) - then rotate clockwise until the monitor stops at 90°. Chapter 1. 1-4
Resumen del contenido incluido en la página 9
Monitor controls The keypad controls on the panel frame are accesses to various functions. For information on how to utilize these keypad controls, please see "Adjusting your monitor image"on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor. Chapter 1. 1-5
Resumen del contenido incluido en la página 10
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iii before carrying out this procedure. 1. Power off your computer and all attached devices, then unplug the computer power cord. 2. Connect the cables according to below icon indication. 3. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the
Resumen del contenido incluido en la página 11
4. Connect one end of the HDMI cable to the monitor HDMI port and the other end to the computer if it has HDMI output terminal. 5. Connect one end of the analog signal cable to the monitor VGA (Analog) connector and the other end to the computer. Chapter 1. 1-7
Resumen del contenido incluido en la página 12
6. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from Display Port, or HDMI. Note: The audio output in HDMI/DP modes. 7. Connect one end of the USB cable to the USB upstream terminal on the back of the monitor, and connect the other end of the USB cable to an appropriate USB port on your computer. Note: The USB port will stay in function as long as the monitor is connected to power, regardless of whether the monitor is switched on or off. Chapter 1.
Resumen del contenido incluido en la página 13
8. Connect one end of the USB cable to the USB upstream terminal on the side of the monitor, and connect the other end of the USB cable to an appropriate USB port on your device. 9. Isnsert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply
Resumen del contenido incluido en la página 14
10. Assembled Line Cleaner as shown below. 11. Power on the monitor and the computer. Chapter 1. 1-10
Resumen del contenido incluido en la página 15
12. To initiate the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. Registering your option Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with yo
Resumen del contenido incluido en la página 16
Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed in
Resumen del contenido incluido en la página 17
The following are some other tips for comfortable viewing of your monitor: • Use adequate lighting for the type of work you are performing. • Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on
Resumen del contenido incluido en la página 18
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On-Screen Display (OSD) is not displayed. Icon Control Description Switches the video input source Input Source Shift back to previous level when in OSD mode 1 Press and hold for 10 seconds to enable or disable the DDC-CI DDC-CI function Exit Exit and return to previous level Optimizes image (size, position, ph
Resumen del contenido incluido en la página 19
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Brightness / Contrast / DCR Cancel OK To use the controls: 1. Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access the selected function. If there is a sub-menu, you can move between options using or , then press to select that function. Use or to make adjustments then press to save. 3. Press to move
Resumen del contenido incluido en la página 20
Table 2-1. OSD functions OSD Icon on Main Controls and Submenu Description Menu Adjustments Adjusts overall screen All input ports brightness. Brightness Brightness/ Adjusts difference between light Contrast/DCR and dark areas. Contrast Enable dynamic contrast ratio. DCR Moves image left or right. Analog(VGA) only Horizontal Position Image Position Moves image up or down. Vertical Position Optimizes image (size, position, phase and clock). Automatic Image Setup Manually optimizes im
