Resumen del contenido incluido en la página 1
AQU5611D BK
AQU5611DT BK 9.2 million pixels
Color TFT LCD Monitor
USER MANUAL
P/N: 55P1003
Resumen del contenido incluido en la página 2
First Edition (July 2002) © Copyright IIYAMA CORPORATION 2002. All rights reserved.
Resumen del contenido incluido en la página 3
Danger Statements DANGER To avoid shock hazard: v Do not remove the covers. v Do not operate this product unless the stand is attached. v Do not connect or disconnect this product during an electrical storm. v The power cord plug must be connected to a properly wired and grounded power outlet. v Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets. v To isolate the monitor from the electrical supply, you must remove the plug fro
Resumen del contenido incluido en la página 4
iv AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL
Resumen del contenido incluido en la página 5
Notices Attention v Do not exert strong pressure to the surface of the monitor screen. You may break the LCD panel. v Do not place heavy objects on top of this product. They may damage the monitor. v Do not touch the monitor screen with your fingers. Fingerprints and oil stains may remain on the screen surface. They are difficult to wipe off. v The monitor is heavy. Ask the help of others if you cannot carry it by yourself. v When leaving your office for a long vacation, always unplug the power
Resumen del contenido incluido en la página 6
License inquiries References in this publication to iiyama products, programs, or services do not imply that iiyama intends to make these available in all countries in which iiyama operates. Any reference to an iiyama product, program, or service is not intended to state or imply that only iiyama product, program, or service may be used. Any functionally equivalent product, program, or services that does not infringe on any of the intellectual property rights of iiyama may be used instead of the
Resumen del contenido incluido en la página 7
Contents Danger Statements....................... iii Notices............................ v Attention............................v LCD considerations........................v Considerations on the monitor resolution................v Operating considerations......................v License inquiries ........................vi Trademarks ..........................vi Chapter 1. Before setting up....................1 Prerequisites..........................1 Unpacking...........................1 Check
Resumen del contenido incluido en la página 8
Industry Canada Class A Emission Compliance Statement.........33 Avis de Conformitéà la Réglementation d’Industrie Canada ........33 Deutsche EMV-Direktive (electromagnetische Verträglichkeit)........34 European Union – EMC Directive..................34 Union Européenne – Directive Conformitéélectromagnétique........34 Union Europea – Normativa EMC..................35 Europese Unie -- EMC-richtlijnen ..................35 Europeiska Unionen - EMC Direktiv .................36 Statements for Other
Resumen del contenido incluido en la página 9
Chapter 1. Before setting up This manual contains information on how to set up and operate the AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor, hereafter called the monitor. This chapter describes the following: v Prerequisites v Unpacking v Checking parts Prerequisites You will need a personal computer or a workstation (hereafter called the computer) with the following. v A Dual DVI output compliant video graphics card (hereafter simply called the DVI) Refer to http://www.iiya
Resumen del contenido incluido en la página 10
Checking parts Check the box for the following items. If any items are missing or damaged, contact your place of purchase immediately. h Monitor h USER MANUAL (This book) h Connector tool h Power adapter and cord h Power cord h Digital signal cable P/N: 07N2227 Note: The digital signal cable is shipped with one end connected to the monitor. 2 AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL
Resumen del contenido incluido en la página 11
Chapter 2. Hardware setup This chapter describes the following: v The location of the controls, switches, and connectors. v The procedure for setting up the monitor. Locations Front view Monitor screen OSD control Serial number label Brightness control Power switch Base stand Power light (Power on/Standby) Rear view DC-IN connector Video connector Connector cover Security keyhole Stand rear cover Cable hook Cable clamp 3
Resumen del contenido incluido en la página 12
Setup the monitor Storing the connector tool This section describes how to store the connector tool for future use. This tool will be useful when disconnecting the cables from the monitor. Attention: 1. Remove any objects from the surface before tilting the monitor. They might damage your screen. 2. Be careful not to pinch your fingers between the monitor and the surface when tilting the monitor. To store the connector tool, do the following: 1. Clear a work space, and turn the monitor face down
Resumen del contenido incluido en la página 13
3. Remove the connector cover. 1 Connector cover 2 2 4. Unhook the digital signal cable from the cable hook and lift it up to store the connector tool to the rear compartment of the monitor. Cable hook Connector tool Chapter 2. Hardware setup 5
Resumen del contenido incluido en la página 14
Connecting the cables This section describes how to connect the following cables: 1. Power adapter cord 2. Digital signal cable 3. Power cord Connecting the power adapter cord 1. Connect the power adapter cord to the DC-IN connector at the rear of the monitor. Make sure that it clicks firmly into the connector. Video connector DC-IN connector Note: The video connectors A and B on the monitor are Safety Extra Low Voltage (SELV) circuits. 2. Route the cables through the cable clamp and the cable h
Resumen del contenido incluido en la página 15
3. Reinstall the connector cover on the monitor. 2 Connector cover 1 1 4. Reinstall the stand rear cover and turn the monitor to the upright position. Stand rear cover Note: Do not power on the monitor or the computer until instructed. Failing to do so may damage these units or the video graphics card. Chapter 2. Hardware setup 7
Resumen del contenido incluido en la página 16
Connecting the digital signal cable 1. Make sure that the video graphics card is installed on your computer. 2. Make sure that the power cord is NOT connected to your computer. 3. Open the cover of your computer, if necessary. 4. Connect the connector end marked ″1 PRIMARY″ to the DVI port marked ″1″, and the connector end marked ″2 SECONDARY″ to the DVI port marked ″2″ of the video graphics card. 5. If you have opened the cover of your computer, close it. Notes: a. If you want to use the extend
Resumen del contenido incluido en la página 17
Connecting the power cord Note: Read the respective ″Danger Statements″ on pages iii before continuing with this section. 1. Connect the power cord to the power adapter. 2. Connect the power plug to a properly grounded power outlet. Note: Make sure that all the cables are connected, otherwise the power-on light will not turn on. 3. Connect the computer to a properly grounded power outlet and turn on the power switch. Chapter 2. Hardware setup 9
Resumen del contenido incluido en la página 18
4. Press the power switch on the monitor. The power light comes on. Power switch Power lighit Notes: a. When you turn off the monitor, wait at least five seconds before turning it on again. b. If you accidentally disconnected the power cord from the main outlet and you connected it to the outlet again, the screen may flicker continuously. To stop the flicker, press the power switch and turn off the monitor, then turn it on again. c. Refer to “Knowing the operating status of your monitor” on page
Resumen del contenido incluido en la página 19
Chapter 3. Adjusting and maintaining your monitor This chapter describes the following: v How to adjust the viewing angle. v How to set the controls. v The operating status of your monitor. v How to disconnect the cables. v How to use the security keylock. v How to maintain your monitor. Adjusting the viewing angle You can adjust the vertical angle of the monitor to avoid unnecessary light reflection and to make viewing easier. Tilt the screen angle vertically by grasping both sides of the monit
Resumen del contenido incluido en la página 20
Setting the monitor control buttons You can control the various functions of the monitor using the buttons at the front right of the monitor. The four buttons control the following functions: Button/ Direct access functions Functions available from the OSD Button Name Menu Displays the on-screen Enters highlighted menu mode. display (OSD) menu. Menu/Enter Sets the screen to a dimmer Moves the cursor to the left for view. highlighting the icons or for making Left-Arrow adjustments. Sets the scree
