Resumen del contenido incluido en la página 1
USER MANUAL
ENGLISH
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this
brief but comprehensive manual before
installing and switching on the monitor.
Please keep this manual in a safe place
for your future reference.
Resumen del contenido incluido en la página 2
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to i
Resumen del contenido incluido en la página 3
FCC DECLARATION OF CONFORMITY Model Number: PL1702 / PL1702W Trade Name: iiyama Responsible party: Ampronix Inc. Address: 8697 Research Dr. Irvine, CA.92618 U.S.A. Telephone number: 949-788-9930 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested a
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS FOR YOUR SAFETY ......................................................................................................................... 1 SAFETY PRECAUTIONS ............................................................................................................ 1 SPECIAL NOTES ON LCD MONITORS ........................................................................................ 3 CUSTOMER SERVICE ..........................................................................
Resumen del contenido incluido en la página 5
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
Resumen del contenido incluido en la página 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may
Resumen del contenido incluido en la página 7
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find s
Resumen del contenido incluido en la página 8
BEFORE YOU OPERATE THE MONITOR [Stopper] : ProLite B1702S Please stand the monitor and then remove the stopper on the back of the stand slowly. FEATURES 43cm (17") TFT Color LCD Monitor Supports Resolutions up to 1280 × 1024 : ProLite E1702S / E1702SV / B1702S Supports Resolutions up to 1440 × 900 : ProLite E1702WS / E1702WSV 2 High Contrast 1000:1 / High Brightness 300cd/m / Quick Response Time 2ms (Gray to Gray): ProLite E1702S-1 / E1702SV-1 / B1702S-1 2 High Contrast 1000:1 / High Brig
Resumen del contenido incluido en la página 9
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. 1 Power Cable * D-Sub Signal Cable 2 DVI-D Signal Cable * Audio Cable 3 Stand * Cable Holder User Manual 1 CAUTION * The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a
Resumen del contenido incluido en la página 10
FITTING AND REMOVAL OF BASE : ProLite E1702S / E1702SV / E1702WS / E1702WSV CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. Hold the monitor and push the post down into the stand. Stand Press the stopper at the back of the stand and remove the stand from the post. Press the
Resumen del contenido incluido en la página 11
CONTROLS AND CONNECTORS : ProLite E1702S / E1702SV / E1702WS / E1702WSV Menu Button (MENU) A + Button ( ) B Power Switch ( ) C – Button ( ) D Auto Button (AUTO) E Power Indicator F Blue: Normal operation NOTE Orange: Power Management Auto (Signal Select) When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W. Analog / Digital (Signal Select) The monitor enters into powe
Resumen del contenido incluido en la página 12
CONTROLS AND CONNECTORS : ProLite B1702S Menu Button (MENU) A + Button ( ) B Power Switch ( ) C – Button ( ) D Auto Button (AUTO) E Power Indicator F Blue: Normal operation NOTE Orange: Power Management Auto (Signal Select) When no signal is received from the system, the display enters into its Power Management Mode reducing power consumption to < than 2W. Analog / Digital (Signal Select) The monitor enters into power management mode which reduces
Resumen del contenido incluido en la página 13
CONNECTING YOUR MONITOR : ProLite E1702S / E1702SV / E1702WS / E1702WSV Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 35 for CONNECTOR PIN B ASSIGNMENT.) Connect the monitor to the audio equipment with the Audio Cable when using the audio features. C D Connect the Power Cable to the monitor first and then to the power supply. NOTE The signal cables used for connecting the computer and monitor may vary with
Resumen del contenido incluido en la página 14
CONNECTING YOUR MONITOR : ProLite B1702S Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 35 for CONNECTOR PIN B ASSIGNMENT.) Connect the monitor to the audio equipment with the Audio Cable when using the audio features. C D Connect the Power Cable to the monitor first and then to the power supply. NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An i
Resumen del contenido incluido en la página 15
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 34: COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be necessary for your computer and obtained via the Internet, usin
Resumen del contenido incluido en la página 16
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1702S For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's Height and angle to your own preference. Hold the stand so that the monitor does not topple 110mm when you change the monitor’s angle. you are able to adjust the monitor's height up to 110mm,angle up to 35degrees right and left,25 degrees upward,5 degrees downward. NOTE Do not touch the LCD screen when you change the ang
Resumen del contenido incluido en la página 17
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 34. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are ((((( additional Menu pages which can be switched by using the +/– Buttons. Displayed while sRGB is active. Displayed while L
Resumen del contenido incluido en la página 18
ADJUSTMENT MENU CONTENTS Direct You can skip the Menu pages and display an adjustment scale directly by using the following button operations. Brightness / Contrast / Volume: To display direct menu press either of the +/- Buttons. Continue to use the +/- Buttons to select the adjustments required. Auto Set-up: Press the Auto Button when the Menu is not displayed. Volume (Mute): With the OSD menu off, the pressing and holding of the Menu Button for 1-2 seconds will enable/disable the Audio
Resumen del contenido incluido en la página 19
Analog Input Menu : 1 (Analog) Menu:1 1280 × 1024 H:80.0KHz V:75.0Hz Adjustment Item Problem / Option Button to Press Too dark 1 Direct Brightness * Too bright Too dull Direct Contrast Too intense 2 Clock * To correct flickering text or lines 2 Phase * To correct flickering text or lines Too low V-Position Too high Too far to the left H-Position Too far to the right Return to Menu Highlight “Menu : 1” again. 1 * Adjust the Brightness when you are using the monitor in a dar
Resumen del contenido incluido en la página 20
Menu : 2 Menu:2 (Analog) 1280 × 1024 H:80KHz V:75.0Hz Adjustment Item Problem / Option Button to Press NO Return to Menu. 3 Auto Set-up * YES Adjust Clock, Phase, V-Position and H-Position Direct automatically. Setting Off The Auto Set-up is not performed when the signal input is changed. Adjust Clock, Phase, V-Position and H-Position On automatically when the signal input is changed. NOTE The brightness of screen varies for several seconds duri
