Resumen del contenido incluido en la página 1
V191,LV1911,W1971a,W1972a,W1952a
LV2011,LV2011q,W2071d,W2072a,W2072b,W2052a
LV2311,W2371d
User Guide
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
© 2011,2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
Resumen del contenido incluido en la página 4
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides imp
Resumen del contenido incluido en la página 5
Table of Contents About This Guide 1. Product Features HP LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
Energy Star Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Disposal of Waste Equipment by Users in Private Household in the European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Chemical Substances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 HP Recycling Program .
Resumen del contenido incluido en la página 7
1. Product Features HP LCD Monitors The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen with the following features: • Large diagonal display • Maximum graphics resolution: 1366 x 768 @ 60Hz (18.5 in) 1600 x 900 @ 60Hz (20 in) 1920 x 1080 @60Hz (23 in) Plus full-screen support for lower resolutions • VGA analog signal • DVI digital signal on select models • Easy viewing from a sitting or standing position, or while moving from one side
Resumen del contenido incluido en la página 8
2. Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the "Connecting the Power Cable" . WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important safety feature.
Resumen del contenido incluido en la página 9
• Do not allow anything to rest on the power cord. Do not walk on the cord. Maintenance Guidelines To enhance the performance and extend the life of the monitor: • Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. • Use only a power source and connection a
Resumen del contenido incluido en la página 10
3. Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation. Installing the Monitor You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near yo
Resumen del contenido incluido en la página 11
3. Press the base into the column until it locks in position. Figure 3-2 Attaching the Base 4. Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-3 Monitor in upright position Preparing the monitor for wall-mounting 1. Check the stability of the wall-mounting fixture. WARNING! To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor.
Resumen del contenido incluido en la página 12
4. Slide the base away from the bottom of the monitor. Figure 3-4 Sliding the base away from the monitor 5. Four threaded holes are exposed. These holes are for screws to attach the swing arm or other mounting fixture to the back of the monitor. 6. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. The four threaded holes that are on the back of the panel are compliant with the VESA standard for mounting flat-panel monitors. 7. Atta
Resumen del contenido incluido en la página 13
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor are turned off and unplugged. 1. To connect the VGA cable Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer. 2.
Resumen del contenido incluido en la página 14
High-Bandwidth Digital Content Protection (HDCP) (Available on Select Models) Your monitor supports HDCP and can receive high-definition content. High-definition content is available in many sources, such as Blue-ray Disc devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when playing high-definition protected content. Your computer graphics card and monitor must both support HDCP to display prote
Resumen del contenido incluido en la página 15
Adjusting the Tilt For optimal viewing, adjust the screen tilt to your own preference, as follows: 1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt. 2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen. Figure 3-8 Tilt adjustment ENWW Adjusting the Tilt 9
Resumen del contenido incluido en la página 16
4. Operating the Monitor CD Software and Utilities The CD that is included with this monitor contains drivers and software that you can install on your computer. Installing Drivers If you determine that you need to update the drivers, you can install the monitor driver INF and ICM files from the CD, or download them from the Internet. Installing the monitor driver software from the CD To install the monitor driver software from the CD: 1. Insert the CD in your computer CD drive. The CD menu
Resumen del contenido incluido en la página 17
Front-Panel Controls The monitor buttons are located on the bottom of the front panel Figure 4-1 Front-panel control buttons 5 4 3 2 1 No. Icon Description 1 Power Turns the monitor on or puts it in standby or sleep mode. The Power button is located on the bottom or front of the monitor depending on the model. 2 OK If the OSD menu is on, press to select the highlighted menu item. If the OSD menu is inactive, press to activate the auto adjustment feature to optimize the screen image. 3 + If
Resumen del contenido incluido en la página 18
Using the On-Screen Display (OSD) The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: • Cancel - to return to the previous menu level. • Save and Return - to save all changes and return to the OSD Main Menu screen. This Save and Return option is only active if you change a menu item. 12 Chapter 4. Operating the Monitor ENWW
Resumen del contenido incluido en la página 19
OSD MENU Icon Main Menu Submenu Description Brightness Adjustable scale Adjusts the brightness level of the screen. The factory default range is 90. Contrast Adjustable scale Adjusts the contrast level of the screen. The factory default range is 80. Color Selects the screen color. The factory default is 6500K or Custom Color, depending on the model. Warm (5000K) Changes color to slightly reddish white. Standard (6500K) Uses standard colors (default). Cool (9300K) Changes color to slightly b
Resumen del contenido incluido en la página 20
OSD MENU Icon Main Menu Submenu Description OSD Transparency Adjust to view the background information through the OSD. OSD Timeout Sets the time duration in seconds that the OSD Is visible after the last button is pressed. The range Is 5 - 60 seconds. The factory default is 30 seconds. Management Selects the OSD and power management features of the monitor. Power Saver Enables the power saving feature. Select: •On •Off The factory default is On. Power on Recall Restores power to the monit
