Resumen del contenido incluido en la página 1
hp pavilion
v52
monitor guide
Resumen del contenido incluido en la página 2
© 2003 Hewlett-Packard Company. All rights reserved. Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United States of America and other countries/regions. Other brand or product names are trademarks of their respective holders. The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness fo
Resumen del contenido incluido en la página 3
Contents Introduction Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Safety and Maintenance Guidelines Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Important Safety Information. . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Contents Agency Regulatory Notices Federal Communications Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Declaration of Conformity for Products Marked with FCC Logo, United States Only . . . . . . . . . . .
Resumen del contenido incluido en la página 5
1 Introduction Your microprocessor-based, digitally controlled color monitor is a high-performance and easy-to-use product. It employs the latest on-screen menu technology. Kit Contents Your monitor kit should contain: ■ CRT monitor ■ Monitor Base (pre-attached on selected models) ■ AC power cord ■ Speakers ■ Speaker power adapter ■ Documentation kit v52 Monitor Guide 1–1
Resumen del contenido incluido en la página 6
Introduction 1–2 v52 Monitor Guide
Resumen del contenido incluido en la página 7
2 Safety and Maintenance Guidelines Safety Guidelines Power Requirements Refer to the “Power Cord Set Requirements” section in “Agency Regulatory Notices,” for information on the correct power cord set for this device. Important Safety Information WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable Å the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator.
Resumen del contenido incluido en la página 8
Safety and Maintenance Guidelines ■ Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device. ■ Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from t
Resumen del contenido incluido en la página 9
Safety and Maintenance Guidelines Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and away from your monitor. v52 Monitor Guide 2–3
Resumen del contenido incluido en la página 10
Safety and Maintenance Guidelines 2–4 v52 Monitor Guide
Resumen del contenido incluido en la página 11
3 Installation Monitor Base Installation On some monitors, the base must be attached prior to monitor installation. If you need to attach the base, follow these steps: 1. Align the hooks on the base with the sockets on the bottom of the monitor, and attach the base. 2. Push the base toward the front of the monitor until it stops. v52 Monitor Guide 3–1
Resumen del contenido incluido en la página 12
Installation Monitor Installation Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. CAUTION: To avoid damaging the video cable, ensure that the cable aligns with the Ä 15-pin co
Resumen del contenido incluido en la página 13
Installation Speaker Installation Selected monitors come with speakers that must be installed. If you need to install your speakers, follow these steps: 1. Place the control speaker 1 and the other speaker 2 on either side of your monitor. 2. Attach the speaker power cable 3 to the black connector on the back of the control speaker 1, and then connect the AC adapter 4 into an electrical wall outlet. 3. Attach the green connector 5 from the control speaker 1 to the green port on the back of yo
Resumen del contenido incluido en la página 14
Installation 3–4 v52 Monitor Guide
Resumen del contenido incluido en la página 15
4 Operation Information Files The CD-ROM included with this monitor contains two data files that must be installed onto your computer: An .INF file and an .ICM file. The .INF file designates software and defines monitor resources used by Microsoft Windows to ensure monitor compatibility with the graphics adapter in your computer. The .ICM file provides color matching consistency between your monitor screen and your printer. Once installed, this file is activated by graphics programs that hav
Resumen del contenido incluido en la página 16
Operation 3. Click the Settings tab. 4. Click Advanced Properties or Advanced, and select the Monitor tab. 5. Click Properties. 6. Click the Driver tab. 7. Click Update Driver and click Next. 8. Select the recommended option, and then click Next. 9. Select the Specify a Location box. 10. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 11. Click Next to install the monitor driver. Windows Me users The procedure for installing the driver for your opera
Resumen del contenido incluido en la página 17
Operation 7. Select the Monitor tab. 8. Click Properties. 9. Select the Driver tab. 10. Click Update Driver and click Next. 11. Select the recommended option, and then click Next. 12. Select the Specify a Location box. 13. Find and open the hp_v52.inf file on the CD-ROM disc in the Drivers directory, and click OK. 14. Click Next to install the monitor driver. Front Panel Controls Front Panel Controls Item Icon Name Function Select Launches on-screen displays, selects functions and adjustments,
Resumen del contenido incluido en la página 18
Operation On-Screen Display The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button to turn on the monitor. 2. Press the Select button to display the On-Screen Display menu. A screen similar to this one appears. For a description of the icons that appear on the screen, see “On-Screen Display Functions” later in this chapter. Not all OSD features are available on all
Resumen del contenido incluido en la página 19
Operation On-Screen Display Functions Use the Right-Adjustment and Left-Adjustment buttons found on the front control panel of your monitor to adjust these functions. The shaded area indicates that this function is available in the model indicated. ✎ On-Screen Display Icons and Functions Icon Function Description v52 Contrast Right-Adjustment increases the contrast, and Left-Adjustment decreases the contrast. Brightness Right-Adjustment increases the brightness, and Left-Adjustment decreases
Resumen del contenido incluido en la página 20
Operation On-Screen Display Icons and Functions (Continued) Icon Function Description v52 Degauss This control demagnetizes the screen to reduce color impurities. HP suggests you not degauss more than once within a 30-minute period of time. Color Temp Right-Adjustment selects the color Not temperature to the right and Left-Adjustment available selects the color temperature to the left. Reset This control resets the monitor to factory default values. Exit This control exits the OSD menu. Moni
