Resumen del contenido incluido en la página 1
HMLCD17e2, HMLCD19e2
e-Series LCD Monitor
User Manual
Document 800-00718 – Rev A – 07/07
Resumen del contenido incluido en la página 2
Revisions Issue Date Revisions A July 2007 Initial Release
Resumen del contenido incluido en la página 3
FCC COMPLIANCE STATEMENT Information to the User: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: � The dev
Resumen del contenido incluido en la página 4
6. Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. 7. To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case. 8. Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable. Keep the power cable away from where people could trip over it. 9. Be sure to grasp the plug, not the cable, when disconnecting the monitor from a
Resumen del contenido incluido en la página 5
e-Series LCD Monitor User Manual Contents Connecting the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mounting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Controls and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resumen del contenido incluido en la página 6
Contents 6
Resumen del contenido incluido en la página 7
e-Series LCD Monitor User Manual Figures Figure 1 Connecting to external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2 Bottom panel controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 3 Check input Signal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 4 Remote Control . .
Resumen del contenido incluido en la página 8
Figures 8
Resumen del contenido incluido en la página 9
e-Series LCD Monitor User Manual Tables Table 1 D-SUB Pin Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Table 2 Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Table 3 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Table 4 Specification
Resumen del contenido incluido en la página 10
Tables 10
Resumen del contenido incluido en la página 11
e-Series LCD Monitor User Manual Connecting the Monitor The e-Series LCD monitor can be used with your video surveillance system and connects to a number of external devices, such as a DVR, VCR or camera. Figure 1 Connecting to external devices Bottom Panel Controls Figure 2 Bottom panel controls 12 3 4 5 6 7 8 9 10 11 1. PC STEREO IN 2. S-VIDEO (Y/C) OUT Y/C separated signal looping output 3. S-VIDEO (Y/C) IN Y/C separated signal input 4. AUDIO 2 IN Stereo Audio Signal Input 5. AUDIO 1 IN Ste
Resumen del contenido incluido en la página 12
Connecting the Monitor 6. VIDEO 2(AV2) OUT Composite signal Output for AV2 7. VIDEO 2(AV2) IN Composite signal Input for AV2 8. VIDEO 1(AV1) OUT Video looping Output for AV1 9. VIDEO 1(AV1) IN Composite signal Input for AV1 10. D-SUB IN PC Signal Input 11. DC 12Volt IN Note: If there is no connection than the following Check Input Signal message is displayed for 3 seconds: Figure 3 Check input Signal 12
Resumen del contenido incluido en la página 13
e-Series LCD Monitor User Manual Remote Controller Figure 4 Remote Control 1 2 1. POWER Turns the power ON or OFF. There may be a few seconds delay before the display appears. 2. SOURCE Select PC or Video (PC/AV1/AV2/S-Video) 3. MUTE 3 Mutes the sound. 4. MENU Activates and exits the On Screen Display 6 4 (OSD). 5. VOL 5 Move to OSD menu. Increases or decreases 5 the level of audio volume. (Sound Option) 6 6. UP/DOWN Move to OSD menu. When down key is 78 pressed on the main menu. 7. AUTO Au
Resumen del contenido incluido en la página 14
Mounting the Monitor Mounting the Monitor Figure 5 Back of the LCD monitor and mounting 14
Resumen del contenido incluido en la página 15
e-Series LCD Monitor User Manual Controls and Functions Front Panel Controls The options available on the front of the LCD monitor mirror those of the remote control. Figure 6 Front controls 1. SOURCE Selects the input source and moves from the previous menu. 2. MENU Activates and exits the On Screen Display (OSD). It can also be used to move from the previous menu or status. OSD Menu(MAIN): Input Source, Screen, Audio, OSD, Color, Utility, Exit. 3. DOWN From the main menu, this button enables y
Resumen del contenido incluido en la página 16
Controls and Functions OSD Menu Input Source: Select PC, AV1, AV2 or SVIDEO Figure 7 Input Source Screen: Figure 8 Screen settings Brightness Increase or decrease the intensity of the image. Contrast Increase or decrease the intensity (lightness or dimness) of the image. H. position (PC Mode Only) Move image horizontally on screen right or left. V. position (PC Mode Only) Move image vertically on screen up or down. Clock (PC Mode Only) Adjust the vertical noise of screen image. 16
Resumen del contenido incluido en la página 17
e-Series LCD Monitor User Manual Phase (PC Mode Only) Adjust the number of horizontal picture elements. Audio: Figure 9 Audio settings Volume Adjust audio volume. OSD: Figure 10 OSD (On Screen Display) settings H. Position Move the OSD position to right(' ') or left(' '). V. Position Move the OSD position to up('▲') or down('▼'). Transparency Select the OSD background. OSD Timer Select the OSD display timing. Language Select a language among English, Français, Deutsch, Español, Danish, Itali
Resumen del contenido incluido en la página 18
Controls and Functions Color (PC Mode): Figure 11 Color settings Color Temp Adjust color temperature to 9300, 6500, user. (note : 9300 is factory default) Red Adjust red color for user. Green Adjust green color for user. Blue Adjust blue color for user. Utility: Figure 12 Utility settings Recall Select to reset all setting to the factory default values. Lock Select ON or OFF (ON : Control key lock. OFF : Control key unlock) Exit Turn off OSD menu. 18
Resumen del contenido incluido en la página 19
e-Series LCD Monitor User Manual TV Utility: Figure 13 TV Utility settings Exit Turn off OSD menu. Document 800-00718 Rev A 19 07/07
Resumen del contenido incluido en la página 20
D-Sub Connector Pin Assignments D-Sub Connector Pin Assignments Figure 14 D-Sub connector pins Table 1 D-SUB Pin Settings Pin Description 1 Red Video 2 Green Video 3Blue Video 4 Ground 5 Ground 6Red Ground 7 Green Ground 8Blue Ground 9 10 Signal Cable Detect 11 Ground 12 SDA (for DDC) 13 H-SYNC (or H+V SYNC) 14 V-SYNC 15 SCL (for DDC) 20
