Resumen del contenido incluido en la página 1
®
EPSON
14" Super VGA
Color Monitor-
(Models A882441 and A882459)
User’s Guide
Resumen del contenido incluido en la página 2
FCC COMPLIANCE STATEMENT FOR AMERICAN USERS This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
Resumen del contenido incluido en la página 3
IMPORTANT NOTICE DISCLAIMER OF WARRANTY Epson America makes no representations or warranties, either express or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties ofmerchantability and fitness for a particular purpose or for any indirect, special, or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so this exclusion may not apply to you. COPYRIGHT NOTICE All rights reserved. No part of th
Resumen del contenido incluido en la página 4
Important Safety Instructions Although this monitor is designed to assure your safety, improper use can cause electric shock or fire hazard. In order not to defeat the safeguards incorporated in the monitor, observe the following safety instructions: 1. Read all of these instructions and save them for later reference. 2. Follow all warnings and instructions in this manual and marked on the monitor. 3. The monitor contains shock hazard potential. Do not attempt to open or remove any covers, and d
Resumen del contenido incluido en la página 5
14. Do not allow anything to rest on the power cord. Do not place a cord where it may be stepped on. 15. Do not replace the video interface cable with a non-shielded cable 16. Unplug the monitor from the computer and the wall outlet before cleaning. Use a damp cloth for cleaning. 17. Excessive brightness for long periods may permanently imprint an image on the screen. 18. To avoid picture distortion or color disturbance, do not put devices that generate magnetism (such as telephones, televisions
Resumen del contenido incluido en la página 6
Contents 1 Introduction ............................... Energy Star Compliant ..................... 1 2 Where to Get Help ........................ .................. 3 Electronic Support Services Unpacking the Monitor ....................... 4 ....................... 4 Setting Up the Monitor Attaching the Tilt and Swivel Base ............. 5 ............... 7 Selecting a Location for the Monitor ............ Connecting the Monitor to Your Computer 7 Turning On the Monitor ......................
Resumen del contenido incluido en la página 7
Introduction ® Your EPSON Super VGA Color Monitor (models A882441 and ® A882459) is compatible with all IBM 8514A, VGA, and Super VGA modes from 30 to 50 KHz. It offers the following features: o 14-inch, analog color CRT display with non-glare surface and a 13.2-inch viewing area o High-resolution display of up to 1024 x 768 pixels, non-interlaced o Six user-adjustable controls: brightness, contrast, horizontal centering, horizontal size, vertical centering, and vertical size o Universal power s
Resumen del contenido incluido en la página 8
The EPA estimates that if all desktop computers, monitors, printers, and other peripheral devices met Energy Star standards, energy cost savings would exceed $1 billion annually and carbon monoxide emissions would be reduced by 20 million tons. The Energy Star emblem does not represent EPA endorsement of any product or service. Where to Get Help If you purchased your monitor outside the United States, contact an EPSON representative at the nearest marketing location for support and service. Inte
Resumen del contenido incluido en la página 9
Electronic Support Services If you have a modem, the fastest way to access helpful tips, specifications, drivers, application notes, DIP switch or jumper settings, and bulletins for EPSON products is through the online services below. EPSON bulletin board service You can call the EPSON Bulletin Board Service (BBS) at (310) 782-4531. No membership is required. Make sure your communications software is set to 8 data bits with no stop bit, 1 parity bit, and a modem speed up to 28.8 Kbps. See the do
Resumen del contenido incluido en la página 10
Unpacking the Monitor When you unpack your monitor, make sure you have these items : o EPSON 14" Super VGA Color Monitor o AC power cord (to connect the monitor to a wall outlet) o Tilt and swivel base o Warranty card o Registration card. If anything is missing or damaged, contact your EPSON representative immediately. Be sure to keep the monitor’s original box and packing materials in case you need to transport the monitor later. Setting Up the Monitor This section describes how to attach the t
Resumen del contenido incluido en la página 11
Attaching the Tilt and Swivel Base Before you attach the tilt and swivel base, cover your work area with a blanket or foam pad to avoid scratching the monitor. Then follow these steps: 1. Carefully set the monitor face down on the padding so the bottom of the monitor is facing you. 2. Locate the four sets of hooks on the top portion of the base. 3. Hold the base so the hooks are turned down and position the base next to the bottom of the monitor. 14" Super VGA Color Monitor 5
Resumen del contenido incluido en la página 12
4. Insert the hooks into the slots on the monitor. 5. Slide the base toward the front of the monitor until the base clicks into position. 6. Carefully turn the monitor over so it rests on its base Note Always remove the tilt and swivel base before packing and transporting the monitor. To remove the base, disconnect the power cord from the electrical outlet and disconnect the video interface cable from the back of the computer. Carefully set the monitor face down on a padded surface. With the bot
Resumen del contenido incluido en la página 13
Selecting a Location for the Monitor Follow these guidelines when you select a location for the monitor: o Read the safety instructions at the beginning of this manual. Use a large, sturdy desk that can support the weight of the o computer, monitor, and any peripheral devices. The desk should also provide ample space to hold your equipment and work materials. For your comfort, it is best to place the monitor directly in o front of you and sit about an arm’s length away from it. To minimize glare
Resumen del contenido incluido en la página 14
Follow these steps to connect the monitor to your computer: 1. Make sure the monitor, computer, and any peripheral devices are turned off. 2. Turn the monitor around so its back is facing you. 3. Plug the end of the video cable into the video connector on the back of the computer and tighten the two screws on the cable connector. 4. Plug one end of the power cord into the monitor’s AC receptacle. Plug the other end into a properly grounded wall outlet. The monitor contains a universal power su
Resumen del contenido incluido en la página 15
Turning On the Monitor Turn on the monitor by pressing the power button located at the front right of the monitor. Then turn on the computer. After a few seconds, an image appears on the screen. The power indicator is green when you first turn on the monitor and when the monitor is in the full-power state. When the monitor is in the low-power state, the power indicator is amber. 14" Super VGA Color Monitor 9
Resumen del contenido incluido en la página 16
Accessing the Monitor Controls The image control box contains the image controls for the monitor. It is located at the bottom left of the monitor. To access the controls, you need to open the control box cover. Place your finger at the left side of the cover and pull it gently forward until the cover opens. Adjusting the Monitor Controls The controls on the front of the monitor allow you to adjust the display to suit your preferences. The brightness and contrast controls at the bottom right of t
Resumen del contenido incluido en la página 17
The following table summarizes the functions of the monitor’s controls. Control Icon Function Vertical center Centers the image vertically. Turn the control clockwise to move the image up: turn it counterclockwise to move the image down. Adjusts the vertical size of the image. Turn Vertical size the control clockwise to increase the height: turn it counterclockwise to decrease the height. Horizontal Centers the image horizontally. Turn the center control clockwise to move the image to the right:
Resumen del contenido incluido en la página 18
Cleaning the Monitor To keep the monitor operating at its best, it is important to clean it regularly. Follow these steps: 1. Turn off the monitor and unplug the power cord from the wall outlet. Also disconnect the video interface cable from the computer. 2. Use a damp, lint-free cloth to wipe the monitor casing; do not use a wet cloth. 3. To clean the screen, spray a household glass cleaner on a cloth; then wipe the screen. Caution To avoid electric shock, do not spray cleaner directly on the m
Resumen del contenido incluido en la página 19
3. The electrical outlet may not be functional. Test the outlet by plugging in a lamp or other device. The power indicator is on, but there is no image on the screen. 1. Make sure the computer is turned on. 2. Make sure the video interface cable is properly connected to the monitor and the video interface on the computer. See “Connecting the Monitor to Your Computer” on page 7. 3. Adjust the contrast and brightness controls. See page 11. 4. The input signals may be outside the monitor’s horizont
Resumen del contenido incluido en la página 20
3. The input signals may be outside the monitor’s horizontal and vertical frequency ranges (30 to 50 KHz horizontal and 50 to 90 Hz vertical). Make sure the input signals are within the specified ranges. 4. Make sure your computer’s video adapter is set up for use with the monitor and that any DIP switches or jumpers in the computer or on a video adapter card are set properly. See your computer or video adapter card manual for instructions. The image is not centered or if locks in place on the s
