Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Copyright © 2001 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Resumen del contenido incluido en la página 3
2 Table of Contents Usage Notice Precautions ................................................................................. 3 Introduction About the Product ....................................................................... 4 Package Overview ...................................................................... 5 Installation Product Overview........................................................................ 6 Start Your Installation ................................................
Resumen del contenido incluido en la página 4
3 Usage Notice Warning- To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning- Do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s manual to maximize the life of your unit. Do: Turn off the product before cleaning. Use only a dry soft cloth or clean wipe when cleaning the LCD panel surface. Use a soft cloth moistened with mild det
Resumen del contenido incluido en la página 5
4 Introduction About the Product This product is a 12.1” SVGA TFT color LCD touchmonitor with the following features: Direct analog RGB input Active matrix TFT LCD technology 12.1” diagonal screen size 16.7 million displayable colors SVGA 800 x 600 addressable pixels Auto-adjustment Full screen re-scaling capability 31 ~ 54kHz horizontal scan 56 ~ 85Hz high refresh rate Multilingual OSD user controls VESA DPMS power saving Serial touch interface (RS232 cable) Built-in s
Resumen del contenido incluido en la página 6
5 Package Overview Check that the following 10 items are present and in good condition: US/Canada Power Cord LCD Touchmonitor VGA Signal Cable Power Adapter Manual CD Software European power cable User’s Guide and software CD RS-232 Touchscreen Mac Video Adapter Interface Cable Audio-In Cable
Resumen del contenido incluido en la página 7
6 Installation Product Overview Main Unit LCD Touchmonitor User Controls Stand MENU SELECT Rear View Audio Power In Switch Display RS-232 Ear Power Input Touch Phone DC-In Interface
Resumen del contenido incluido en la página 8
7 Start Your Installation Connecting the Touchmonitor (Figure 7.1) To setup this touchmonitor, please refer to the following figure and proce- dures. 1. Be sure all equipment is off. 2. Connect the VGA signal cable from display input connector to the 15-pin connector of your host computer and tighten the screws. 3. Connect the female end of the touchscreen cable to the serial port on the back of your PC, and the male end of the cable to your touchmonitor. 4. Connect the DC power cord to the p
Resumen del contenido incluido en la página 9
8 Power Adapter Power Cord RS-232 Touch Cable Mac Adapter VGA Signal Cable Audio-In Cable (Figure 7.1) Notice: To ensure the LCD display works well with your computer, please configure the display mode of your graphic card to less than or equal to 800 x 600 resolution. Make sure the timing of the display mode is compatible with the LCD display. We have listed the Compatibility Modes of this LCD display in the appendices for your reference.
Resumen del contenido incluido en la página 10
9 User Controls Front Panel Controls MENU SELECT No. / Icon Control Function MENU Menu button Displays the OSD menus SELECT Select Selects the adjustment items from OSD menus. Decrease / Select Decreases value of the adjustment items or selects the functions. Increase / Select Increases value of the adjustment items or selects the functions. Power LED 1. Green indicates the display is turned on. 2. Amber indicates the
Resumen del contenido incluido en la página 11
10 How to Use the OSD Menus 1. Press the “MENU” button to pop up the on-screen menu and to toggle between Main Menu Page 1 to Page 3. 2. Choose the adjustment items by pressing the “ SELECT” button. 3. Adjust the value of adjustment items by pressing the “ ” & “ ” buttons. 4. Press the “ MENU” button again to turn off the OSD menu. If you don’t operate the OSD menu in a pre-set time, the OSD will automatically disappear.
Resumen del contenido incluido en la página 12
11 On-Screen Display Menus First OSD Menu: Main Menu Page 1 Brightness Contrast Horizontal Position Vertical Position Frequency Tracking - + Brightness Adjusts the brightness of the image. Contrast Adjusts the contrast of the display image. Horizontal Position Adjusts the horizontal position of the image. Vertical Position Adjusts the vertical position of the image. Tracking Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing an unsta
Resumen del contenido incluido en la página 13
12 Second OSD Menu: Main Menu Page 2 Auto-Adjustment Re-Scaling Display Mode OSD Off-Time Language Text-Graphic NO Yes Auto-Adjustment Choose this function to obtain an optimum image. Re-Scaling If the input resolution is less than 800 x 600, you can select this function to obtain the full screen image. Display Mode Select this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. OSD Off-Time Adjusts the time period in which the OSD menu
Resumen del contenido incluido en la página 14
13 Third OSD Menu: Main Menu Page 3 Volume Mute Reset - + Volume Allows you to control the volume of sound, Mute Allows you to disable the sound immediately. Reset Returns the display parameters of the current mode to the factory defaults.
Resumen del contenido incluido en la página 15
14 Appendices Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Please refer to the back cover of this manual for the phone number of the Elo TouchSystems office nearest you. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and well connected as described in the “ Installation ” section. Make sure the pins of the connectors
Resumen del contenido incluido en la página 16
15 Warning Signal Sometimes you will see warning messages from the LCD screen. This means that the LCD display cannot receive the signal from the computer graphic card. There are three situations where this may happen. Please check the connected cables or contact your local dealer for more information. No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card. Check all the power switches, power cables, and VGA signal c
Resumen del contenido incluido en la página 17
16 Product Dimensions 340mm/13.4” 286.7mm/11.3” Front View Side View 170mm/6.7” Top View
Resumen del contenido incluido en la página 18
17 Touchmonitor Specifications 12” LCD Touchmonitor (ET12-XXWC-1) Specifications Active matrix, thin film transistor Display Type (TFT), liquid crystal display Sl ize 12-inch diagona 246 x 185 mm useful screen area N0 ative Resolution 800 x 60 Te ouchscreen AccuTouch, anti-glar Cg olors 16 million with ditherin Dl isplay Brightness AccuTouch: 188 cd/m² typica Bl ack-light Lamp Life 30,000 hours at full brightness typica Vl iewing Angle Horizonta +/-30 or 120 degrees total Vertical +/10/-20 or 30
Resumen del contenido incluido en la página 19
18 AccuTouch Touchmonitor Specifications Mechanical Cg onstruction Top: Polyester with outside hard-surface coatin with clear or antiglare finish. Inside: Transparent conductive coating. Bottom: Glass substrate with uniform resistive coating. Top and bottom layers separated by Elo- patented separator dots. Standard deviation of error is less than 0.080 in. Positional Accuracy (2.03 mm). This equates to less than ±1%. More than 100,000 touchpoints/in² (15,500 Touchpoint Density touchpoints/cm²).
Resumen del contenido incluido en la página 20
19 Compatibility Modes V . Frequency H. Frequency Resolution Mode (Hz) (kHz)
