Resumen del contenido incluido en la página 1
User’s Manual
Monochrome LCD Monitor
It shall be assured that the final system is in compliance to
IEC60601-1-1 requirements.
Resumen del contenido incluido en la página 2
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. • Power supplied equipment can emit electr
Resumen del contenido incluido en la página 3
English TABLE OF CONTENTS PRECAUTIONS....................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features ........................................................................................................9 1-2. Package Contents..........................................................................................9 1-3. Controls & Connectors .......
Resumen del contenido incluido en la página 4
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] [Symbols on the unit] Symbol Location This
Resumen del contenido incluido en la página 5
English WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. D
Resumen del contenido incluido en la página 6
English WARNING To disconnect the power cord, grasp the plug firmly and pull. OK Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. * Do n
Resumen del contenido incluido en la página 7
English WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Follow local regulation or laws for safe disposal. The backlight of the LCD panel contains mercury. CAUTION Handle with care when carrying th
Resumen del contenido incluido en la página 8
English LCD Panel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the p
Resumen del contenido incluido en la página 9
English 1. INTRODUCTION Thank you for choosing an EIZO Monochrome Monitor. 1-1. Features • DVI Digital input compliant (p.30 ; for TMDS, p.30) • [Horizontal scanning frequency] 103.9 ± 4 kHz [Vertical scanning frequency] 50.06 ± 3 Hz [Resolution] 5M pixels (Portrait: 2048 × 2560 dots (H × V)) • USB (Universal Serial Bus) hub support (p.20) • Utility software “ScreenManager Pro for Medical”, which enables control of the monitor from a Windows PC with a mouse or keyboard (refer to
Resumen del contenido incluido en la página 10
English 1-3. Controls & Connectors Front ® ScreenManager main menu Control Panel (1) ENTER Enter Switch *1 (2) Directing Switches (Left, Down, Up, Right) (3) Power Switch *2 (4) Power Indicator Green Operational Orange Power saving Flashing orange (2 times for each) Power saving(Off mode) Flashing orange slowly Power off (Main power is on) Off Main Power off *1 These switches can be changed to Up, Left, Right and Down in case of selecting “Landscape” in
Resumen del contenido incluido en la página 11
English Side / Rear (5) USB upstream port (x 1) (6) USB downstream ports (x 2) (7) DVI-D input connector (8) Power connector *3 (9) Security lock slot *4 (10) Monitor stand with adjustable height (detachable) (11) Main Power Switch *3 Allows for connection of a security cable. This lock supports Kensington’s MicroSaver security system. For further information, please consult : Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA T
Resumen del contenido incluido en la página 12
English 2. CABLE CONNECTIONS NOTE • Be sure that the power switches of both the PC and the monitor are OFF. • Refer also to the PC user's manual when connecting the monitor. 1. Rotate the monitor ninety degrees counter-clockwise into the portrait position. 2. Connect the signal cable to the DVI-D input connector on the rear of the monitor and to the video output connector on the PC. After connecting, secure the cable connectors with the attached screw-in fasteners. Signal cable
Resumen del contenido incluido en la página 13
English 3. Connect the power cord to the power connector on the rear of the monitor. 4. Thread the power cord and signal cable through the cable holder on the rear of the monitor stand. NOTE • When threading the cables through the cable holder, lead them to the cable entrance side and pinch the projection to open the cable entrance. • It is recommended that some slack be left in the cables to allow for smooth adjustment of the monitor stand and easy rotation between the portrait and
Resumen del contenido incluido en la página 14
English 7. Turn on the PC’s power. If an image does not appear, refer to “6. TROUBLESHOOTING” (p.23) for additional advice. When finished, turn off the PC and the monitor. NOTE • Adjust the brightness of the screen depending on the brightness of your environment. • Be sure to take adequate rests. A 10-minute rest period each hour is suggested. 8. When using the software "ScreenManager Pro for Medical," connect the monitor to a USB compliant Windows computer (or other USB hub) wit
Resumen del contenido incluido en la página 15
English 3. MENUS & FUNCTIONS 3-1. ScreenManager Screen adjustments and settings can be performed with the monitor controls. ScreenManager main menu Directing Switches Left, Down, Up, Right Enter Switch How to use the ScreenManager [Entering the ScreenManager] (1) Touch the enter switch. [Making adjustments and settings] (1) Select the desired submenu icon with the directing switches and touch the enter switch. (2) Select the desired setting icon with the directing switche
Resumen del contenido incluido en la página 16
English ScreenManager Menus and Settings The following table briefly explains each of the menus and settings in the ScreenManager. Main menu Sub menu Reference *1 Screen Brightness Control the brightness for the entire screen. Unlock Unlock the locked functions. (p.18) *2 *3 LUT Setting Default / Normal / Custom Set the LUT (Look-up table) (p.30) setting. PowerManager DVI DMPM Refer to “3-3. Power-save Setup” (p.19). Others Off Timer Turn off the monitor after a specified time
Resumen del contenido incluido en la página 17
English 3-2. Other Useful Functions Adjustment Lock Use this function to prevent any accidental changes to the monitor settings. The following table shows which functions the adjustment lock affects. Locked functions • Display, adjustment, and setting of the ScreenManager • Adjustment of brightness by the Directing Switch [How to lock] (1) Turn off the monitor power by touching the power switch. (2) Touch the power switch while touching the enter switch. [How to unlock] (1) Tur
Resumen del contenido incluido en la página 18
English Power Indicator Use the function to keep the power indicator without light while the monitor is operational. (The power indicator is set by default to light when the power is turned on.) [Procedure] (1) Select in the ScreenManager menu. (2) Select “Disable”. Unlock Function after Calibration The calibration is available by using the specified optional calibration kit (p.28). After the calibration, the functions below are automatically locked. Locke
Resumen del contenido incluido en la página 19
English 3-3. Power-save Setup Use the menu in the ScreenManager to configure the power-save setup. This monitor complies with the “DVI DMPM” (p.30). NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. • Even if the monitor is in power-saving mode, USB compliant devices draw power when they are connected to the monitor's USB ports (both upstr
Resumen del contenido incluido en la página 20
English 4. MAKING USE OF USB (UNIVERSAL SERIAL BUS) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment • PC equipped with USB ports or another USB hub connected to the USB compliant PC • Windows 98/2000/Me/XP // Mac OS 8.5.1 or later • EIZO USB Cable (MD-C93) NOTE • The USB hub function may not wo
