Resumen del contenido incluido en la página 1
English
User’s Manual
FlexScan
F520
Color Display Monitor
Resumen del contenido incluido en la página 2
CONTENTS PRECAUTIONS ................................................................3 INTRODUCTION...............................................................7 About This Manual ................................................................ 7 Controls & Connectors ......................................................... 7 Package Contents ................................................................ 7 1 INSTALLATION ............................................................8 1-1 Conn
Resumen del contenido incluido en la página 3
PRECAUTIONS IMPORTANT! * This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry, picture positioning and color convergence E and purity in the case of color monitors) is optimally adjusted to the earth's magnetic field of the specific destination. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. * The manufacturer is
Resumen del contenido incluido en la página 4
WARNING • If the monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning monitor can be dangerous. Do not dismantle the cabinet or modify the monitor. Dismantling the cabinet or modifying the monitor may result in electric shock or burn. Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots i
Resumen del contenido incluido en la página 5
Do not overload your power circuit, as this may result in fire or electric shock. For proper connections of the power cord, be certain to plug the E power cord to the provided monitor connector and directly to a wall outlet. By not doing so may result in fire or electric shock. Handle the power cord with care. * Do not place the cord underneath the monitor or other heavy objects. * Do not pull on the cord. * Do not attempt to repair a damaged cord. If the power cord becomes damaged, stop
Resumen del contenido incluido en la página 6
Do not remove the tilt-swivel stand. The stand is required to maintain clearance for the ventilation slots on the bottom of the cabinet. Removing the stand will block these slots and may result in fire or electric shock. Do not touch the plug with wet hands. Touching the plug with wet hands is dangerous and can cause electrical shock. At the end of the day or if you plan to leave the monitor unused for an extended period, after turning off the power switch disconnect the power cord from t
Resumen del contenido incluido en la página 7
INTRODUCTION About This Manual This manual explains the precautions, specifications, and operation of your EIZO E monitor. Please read through this manual as it will help you to get the most out of your monitor. Controls & Connectors: Front Power indicator Indicates the power-on status, as follows: Solid green: Power is ON ™ Flashing green: PowerManager Mode 1 QuickSet Control pad Advance Notice Mode (hereinafter “Control pad”) Yellow: PowerManager Mode 2 Flashing Yellow: Off Timer Mode Power s
Resumen del contenido incluido en la página 8
1 INSTALLATION 1-1. Connecting the monitor to the PC 1)Be sure that the power switches of both the PC and the monitor are OFF. 2)Plug the signal cable into the connector at the rear of the monitor. When connecting the signal cable or cable adapter, first check that the shape at the cable side matches the shape at the connecting side. After connecting, secure the connection with the screw-in fasteners. 3)Plug the other end of the cable into the video connector on the rear of the PC. Refer to
Resumen del contenido incluido en la página 9
WARNING • Use the enclosed power cord. If using the power cord other than the enclosed E one, use the following cord. In USA and Canada, use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications: *Rating: min. 125 V, 10 A * Length: max. 2.0 m * Type: SVT *Plug type: NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A In Europe, use a proper European standard approved power cord meeting the following specifications: *Rating: min. 250 V, 10 A * Length: max.
Resumen del contenido incluido en la página 10
2 SCREEN ADJUSTMENT 2-1. How to use the ScreenManager Entering the ScreenManager Press the ENTER key to display the ScreenManager Main menu. Main menu Making the Adjustments and Settings 1)Select the desired icon using the Arrow keys, and then press the ENTER key to display the each adjustment/setting menu. Adjustment menu 2)Use the Control pad (the four Arrow keys and the ENTER key) to make the required adjustments and settings. Save & Exit 1)To save settings and return to the Main menu, press
Resumen del contenido incluido en la página 11
Function (Arrow Keys Used) OSD E Contrast/ Adjusts: a) Contrast (left/right) Brightness b) Brightness (up/down) · When a white text against a black background (e.g., DOS text) is used, setting the brightness at its maximum is recommended because a dark setting will result in eye strain due to high character contrast. Adjusts: Horizontal image size (left/right) Size Vertical image size (up/down) Position Adjusts: Screen position Side- Adjusts: Side-pin balance (left/right) Side-pincushion (up/dow
Resumen del contenido incluido en la página 12
Function (arrow keys usd) OSD Color Adjusts: Color temperature Temperature can be set from 6,500 K to 9,300 K, in 500 K increments. · Each monitor is slightly different, if two monitors are set to the same color temperature value (i.e. 6,500K), they may not necessarily look the same. PowerManager · VESA DPMS · Off Timer (Refer to the text below) Video Level Adjusts: Video Level Set the video level to adapt the output level of the computer or the graphics board. Reset Default settings are as foll
Resumen del contenido incluido en la página 13
VESA DPMS What is VESA DPMS? E The acronym VESA stands for “Video Electronics Standards Association,” and DPMS stands for “Display Power Management Signaling.” DPMS is a com- munication standard that PCs and graphics boards use to implement power savings at the monitor side. Set-up Procedure 1)First, make the appropriate settings for the PC. 2)Select VESA DPMS icon in the ScreenManager’s PowerManager menu. 3)Select “On”. Power saving method of VESA DPMS and the monitor VESA DPMS utilizes four
Resumen del contenido incluido en la página 14
To Delay Entering the “Off Timer Mode” To delay entering the “Off Timer Mode”, press any keys on the front panel located to the left of the power switch during the “Advance notice Mode”. The monitor will continue to operate for an additional 90 minutes. There will be another advance notice for 15 minutes as described. Delayed entrance into the “Off Timer Mode” can be extended as many times as desired. What is ENERGY STAR? “ENERGY STAR” is a set of power saving guidelines issued by the U.S. E
Resumen del contenido incluido en la página 15
3 TROUBLESHOOTING Troubleshooting If a problem persists even after applying the suggested remedies, contact an E EIZO dealer. Problems Points to check with possible solutions 1) Indicator status: OFF Check that the power cord is correctly connected. 2) Indicator status: GREEN Check brightness and contrast settings. Minimum settings will cause screen to be blank. Try pressing a key on the keyboard, or clicking the 3) Indicator status: GREEN mouse. (The monitor may be in a power saving mode.) (
Resumen del contenido incluido en la página 16
Problems Points to check with possible solutions 8) The entire screen appears too Adjust the contrast and brightness using the dark or bright. ScreenManager. See page 10. Output level from the computer may not conform the monitor. Please set the video level using the ScreenManager. See page 12. Some signal timing can be the cause of this problem. To correct this, turn off the monitor, then hold down the AUTO-SIZING button and “down” arrow key while turning on the monitor again. This will ch
Resumen del contenido incluido en la página 17
Problems Points to check with possible solutions 10) Moiré patterns are Reduce the moiré using the ScreenManager’s “Moiré” distracting. adjustment menu following the procedure below. E 1) Set the desktop to an every-other-dot pattern so that moiré will be visible. 2) Go to the ScreenManager’s “Moiré” menu and adjust so that moiré becomes almost unnoticeable. See page 11. 3) Change to a different desktop background to reduce moiré even further. Change the horizontal and vertical dimensions of th
Resumen del contenido incluido en la página 18
4 CLEANING WARNING Keep liquids away from the monitor. Spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately. Have the unit checked by a qualified service engineer before using it again. Using the monitor in this condition could cause serious injury or equipment damage. CAUTION To ensure safety, always unplug the monitor before cleaning it. Failure to do so may result in electri
Resumen del contenido incluido en la página 19
5 SPECIFICATIONS Electrical Specifications CRT 45 cm (17 inch) class, 90° deflection Invar Shadow Mask ® with Anti- Reflective SuperErgoCoat E E CRT AG Pitch 0.26 mm Scan Frequency(Horizontal):30 kHz-96 kHz (Automatic) Scan Frequency (Vertical): 50 Hz-160 Hz (Automatic) Max. Active Display Area 318 mm (H) × 238 mm (V) (12.5” (H) × 9.3” (V)) (Viewable image size: 397 mm (15.6”)) * Display size can be set by the user through microprocessor control panel. * The actual size displayed can be depende
Resumen del contenido incluido en la página 20
Preset Timing 8 factory presets shown below have been registered in the monitor’s microprocessor. Resolution Frequencies Interlace Sync Polarity Video Signal fH (kHz) fV (Hz) Level VGA 720 × 400 31.47 70.09 Non H/Negative 0.7V(p-p)/75Ω (text) V/Positive VGA 640 × 480 31.47 59.94 Non H/Negative 0.7V(p-p)/75Ω V/Negative VESA 640 × 480 37.50 75.00 Non H/Negative 0.7V(p-p)/75Ω V/Negative VESA 800 × 600 46.88 75.00 Non H/Positive 0.7V(p-p)/75Ω V/Positive VESA 1024 × 768 60.02 75.03 Non H/Positive 0
