Resumen del contenido incluido en la página 1
ENGLISH
1
Resumen del contenido incluido en la página 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2001 by EIZO NANAO CORPORATION. All rights reserved. No par
Resumen del contenido incluido en la página 3
ENGLISH CONTENTS PRECAUTIONS ............................................................................. 4 1. INTRODUCTION ............................................................................ 8 1-1. Features ....................................................................................................... 8 1-2. Package Contents........................................................................................ 8 1-3. Controls & Connectors .....................................
Resumen del contenido incluido en la página 4
PRECAUTIONS IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal safety and proper maintenance. Please read this section and the caution statements on the monitor (refer to the figure below). [Location of the Caution Statements] The equipment must be connected to a grounded main outlet
Resumen del contenido incluido en la página 5
ENGLISH WARNING Place the unit on a strong, stable surface. A unit placed on an inadequate surface may fall, resulting in injury or equipment damage. If the unit falls, disconnect the power immediately and have the unit checked by a qualified service engineer before using it again. OK Using a unit after it has been dropped may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may cause damage and could result in fire or electric shock. * Do not place i
Resumen del contenido incluido en la página 6
WARNING Use the correct voltage. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage. * Do not overload your power circuit, as this may result in fire or electric shock. * For proper connections of the power cord, be certain to plug the power cord to the provided unit connector and directly to a wall outlet. Not doing so may result in fire or electric shock. Handle th
Resumen del contenido incluido en la página 7
ENGLISH CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury or equipment damage. Do not move it alone. Always work with another person. Moving it alone may cause lower back pain. Also note that the unit is heavier at the front than at the rear. OK Do not block the ventilation slots on the cabinet. * Do not place books or any o
Resumen del contenido incluido en la página 8
1. INTRODUCTION Thank you very much for choosing an EIZO Color Display Monitor. 1-1. Features Horizontal scanning frequency of 30-130 kHz Vertical scanning frequency of 50-160 Hz Fine contrast function with a wider margin provides for a more brightly contrasted picture (See page 15) Power saving system and off timer system (See page 16) Adjustment lock function, to prevent any accidental changes (See page 17) Dual inputs with individual color configuration (See page 17) 1-2. Package Co
Resumen del contenido incluido en la página 9
ENGLISH 1-3. Controls & Connectors Front (1) ScreenManager™ (2) BNC/D-SUB Selection Button (3) AUTO-SIZING Button (4) QuickSet™ Control Pad (Hereinafter “Control Pad”) (5) Power Indicator (2)(3) (4) (5)(6) Indicated color Power-on status Green Power is on (Normal mode) Flashing Green Power save mode 1 Advance notice of 1 monitor’s off Timer* Yellow Power save mode 2 (7) Bottom side Flashing Yellow Power save mode with 1 monitor’s off Timer* (6) Power Switch 2 (7) Power Terminal* (with a cover)
Resumen del contenido incluido en la página 10
2. INSTALLATION 2-1. Connecting the monitor to the PC Be sure that the power switches of both of the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Standard graphics board Video Output Connector D-Sub mini 15 pin Standard graphics board Signal Cable (Enclosed) Macintosh Video Output Connector D-Sub min
Resumen del contenido incluido en la página 11
ENGLISH 2. Plug the power cord into the power connector at the rear of the monitor. Then, plug the other end of the cord into a power outlet. WARNING WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. 3. Turn on the monitor fir
Resumen del contenido incluido en la página 12
2-2. Getting Ready for Operation Try each setting procedure if necessary in the following cases. 1. The display image size and/or position is incorrect Press the AUTO-SIZING button on the front panel. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING p.25) button whenever changing the graphics board or the resolution , or when image size and/or position is incorrect. 2. The display area is t
Resumen del contenido incluido en la página 13
ENGLISH 3. SCREEN ADJUSTMENT Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Up 3-1. How to use the ScreenManager Enter Use the control pad on the front panel. The control pad can Left Right be pressed in 5 directions, “Enter”, “Up”, “Down”, “Left” and “Right”. Down 1. Entering the ScreenManager Display the ScreenManager “Main menu” by pressing the “Enter” of the control pad. Main menu displays the current connector type and frequency of the input sign
Resumen del contenido incluido en la página 14
Adjustments and Settings Main menu Sub menu Adjustments and Settings See page Contrast — Screen contrast and brightness* — Size — Screen size — Position — Screen position — Screen Side Pin Side pin balance — Trapezoidal Distortion — Tilt Inclination — p.25) Uniformity Uniformity p. 20 p.24) Convergence Convergence p. 20 p.24) Moiré Reduction Moiré p. 19 Fine Contrast To brighten the photo, picture image or movie p. 15 Signal Filter 1 To decrease the slightly shadowed images or ch
Resumen del contenido incluido en la página 15
ENGLISH 3-2. Color Adjust the color using by menu. 1. To set the color temperature Set the . Temperature can be set from 4,000 K to 10,000 K, in 500 K increments. (Including the 9,300 K default setting.) 2. To adjust each color tone, (Red, Green and Blue) p.24) p.24) Adjust the and . Change the to . The values shown in percentages (%) for both the Cutoff and Gain are available only as a reference tool. (1)First, set the monitor
Resumen del contenido incluido en la página 16
3-4. Power Save There are two power save settings choose the setting which matches your environment. Set the power saving setting by using menu. Do your part to conserve energy, turn off the monitor when you are finished using it. Complete energy use can only be accomplished by disconnecting the monitor’s power supply cord from the plug receptacle. p.25) 1. To use the PC’s power saving system (VESA DPMS ) Select “ON” in the menu. [Procedure] (1) Set the PC’s power s
Resumen del contenido incluido en la página 17
ENGLISH 3-5. Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function Adjustments and settings in the ScreenManager. AUTO-SIZING button. Unlocked function Adjustment of contrast and brightness by the shortcut keys. BNC/D-Sub Selection button. [To lock] Press on the AUTO-SIZING button while switching on the monitor’s power. [To unlock] Switch off the monitor’s power, then hold down the AUTO-SIZING button once again and turn the power back on. 3
Resumen del contenido incluido en la página 18
4. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact an EIZO dealer. *The bracket < > indicates the function of ScreenManager Problems Points to check with possible solutions 1. No picture Check that the power cord is correctly connected. Indicator status: Off If the problem persists, turn off the monitor power for a few minutes, then turn it back on and try again. Indicator status: Green Check the Contrast and Brightness. Indi
Resumen del contenido incluido en la página 19
ENGLISH Problems Points to check with possible solutions 3. (The continuation) Use of the adjustment may cause a slight vibration. To eliminate the vibration, set the adjustment level to lower percentage or 0%. If the volume level of the EIZO optional i·Sound speaker is too high, it may, in some cases, cause a slight vibration. To eliminate, turn down the volume of the speaker. 4. The image is flickering. Flicker will occur with interlaced scanning, or
Resumen del contenido incluido en la página 20
Problems Points to check with possible solutions 8. The entire screen appears Adjust the (Contrast and Brightness). too dark or bright. Some signal timing can be the cause of this problem. To correct this, turn off the monitor, then hold down the “down” arrow key while turning on the monitor again. This will change the signal timing and brighten the screen. If the above operation is repeated, the screen becomes dark again. 9. Color is abnormal. When the monito
