Resumen del contenido incluido en la página 1
SAFETY SYMBOLS ..................................................2
PRECAUTIONS .........................................................3
Important
1. INTRODUCTION ...................................................7
1-1. Features ........................................................... 7
Please read this User’s Manual carefully to
1-2. Package Contents ............................................ 8
familiarize yourself with safe and effective
1-3. Controls & Connectors ....................
Resumen del contenido incluido en la página 2
SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or propertyor product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2006-2007 EIZO NANAO CORPORATION All rights reserved.
Resumen del contenido incluido en la página 3
PRECAUTIONS PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit smoke, smells l
Resumen del contenido incluido en la página 4
PRECAUTIONS WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or OK electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the
Resumen del contenido incluido en la página 5
PRECAUTIONS WARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a dama
Resumen del contenido incluido en la página 6
PRECAUTIONS LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels:99.9994%or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to fl
Resumen del contenido incluido en la página 7
1. INTRODUCTION 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features CE210W • 21" wide format LCD • Dual inputs compliant (DVI-I x 2) • DVI Digital input (TMDS ) compliant • [Horizontal scanning frequency] Analog: 24 - 82 kHz Digital: 31 - 65 kHz [Vertical scanning frequency] Analog: 49 - 86 Hz (1280x1024: 49-76Hz/1680x1050: 49 -61Hz) Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1680 dots x 1050 lines • Frame Synchronous mode supported (59 - 61 H
Resumen del contenido incluido en la página 8
1. INTRODUCTION 1-2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged. • LCD Monitor • Power Cord • Analog Signal Cable (FD-C16) • Digital Signal Cable (FD-C39) • EIZO USB Cable (MD-C93) • "EIZO LCD Utility Disk" CD-ROM • Calibration software "ColorNavigator CE" (in the CD-ROM) • ColorNavigator CE" Quick Reference • User's Manual (in the CD-ROM) • Setup Manual • LIMITED WARRANTY • Adjustment Certificate • Mounting Screws (M4 x 12 m
Resumen del contenido incluido en la página 9
1. INTRODUCTION 1-3. Controls & Connectors Front (1) SIGNAL AUT O ENTER (2) Control Panel (6) (5) (7) (8) (3) (4) ® (1) ScreenManager Monitor Adjustment menu (2) Monitor Adjustment menu Directly touching the left or right button allows you to select a FineContrast mode. (3) Input Signal Selection Switch(SIGNAL) Switch the input signals when connecting 2 PCs. (4) Auto Adjustment Switch (AUTO) Adjust the screen to appropriate condition automatically (analog input only). (5) Enter Switch (ENTER)
Resumen del contenido incluido en la página 10
1. INTRODUCTION Rear / Side / Bottom (CE210W is given as an example.) (9) (15) (10) (11) Bottom (12) (14) (13) (9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by removing the stand (See " 6. ATTACHING AN ARM "). (10) Security Lock Slot Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system. For further information, please consult: Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA Tel.: 800-650-
Resumen del contenido incluido en la página 11
2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) in accordance with the charts below. Tips • It is recommended to use this monitor in the digital signal input. • When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input CE210W Resolution Frequenc
Resumen del contenido incluido en la página 12
2. CABLE CONNECTION Digital Input The monitor supports the following resolutions only. CE210W Resolution Frequency Dot Clock Remarks 640×480 60Hz VGA 720×400 70Hz VGA TEXT 800×600 60Hz VESA 1024×768 60Hz VESA 120 MHz (Max.) 1280×960 60Hz VESA 1280×1024 60Hz VESA 1680×1050 60Hz VESA CVT RB (Reduced Blanking) CE240W Resolution Frequency Dot Clock Remarks 640×480 60Hz VGA 720×400 70Hz VGA TEXT 800×600 60Hz VESA 1024×768 60Hz VESA 1280×960 60Hz VESA 1280×1024 60Hz VESA 162 MHz (Max.) 1600×1200 60Hz
Resumen del contenido incluido en la página 13
2. CABLE CONNECTION Analog Input Signal Cable Connector of the PC PC Signal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 • Standard graphics card pin • Power Macintosh G3 Input Connector(monitor) / DVI (Blue & White) / Power Mac G4 (VGA) Digital Input Signal Cable Connector of the PC PC Signal Cable (FD-C39 enclosed) Video Output Connector / DVI • Digital Graphics card Input Connector (monitor) / DVI • Power Mac G4/G5 (DVI) NOTE • The monitor is not compatible with a Power M
Resumen del contenido incluido en la página 14
2. CABLE CONNECTION Lead the power cord and signal cable into the cable holder at rear of the monitor. 4 NOTE • The cables are recommended to lead with slight sag for the smooth motion of the stand. Adjust the "height", "front and back position" and "angle" of the monitor. 5 1. Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull the monitor forward. Grip both side of the center part Move slowly of the monitor and move slowly (refer to the right figure.
Resumen del contenido incluido en la página 15
2. CABLE CONNECTION Turn on the monitor's Power switch and then turn on the PC's power. 6 The monitor's power indicator will light up (blue). If an image does not appear, refer to the " 7. TROUBLESHOOTING" for advice. Whenever finished, turn off the PC and the monitor. Tips • When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. • Adjust brightness of the screen depending on the brightnes
Resumen del contenido incluido en la página 16
2. CABLE CONNECTION 2-3. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connecting Examples SIGNAL1 SIGNAL2 SIGNAL1 SIGNAL2 Signal Cable Signal Cable D-Sub (FD-C16 enclosed) (FD-C39 enclosed) (Ex.1) Analog mini 15 DVI Digital pin Signal Cable Signal Cable D-Sub D-Sub (FD-C16 enclosed) (FD-C16 optional) (Ex.2) Analog mini 15 mini 15 Analog pin pin Signal Cable Signal Cable (FD-C39 enc
Resumen del contenido incluido en la página 17
2. CABLE CONNECTION Priority setting Performance 1 If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 1 is changed even if active input was Signal 2. 2 If signals from both inputs are present, the monitor gives preference to Signal 2 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 2 is changed even if act
Resumen del contenido incluido en la página 18
3. ScreenManager 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ScreenManager Main Menu Control Switch Left, Down, Up, Right SIGNAL AUTO ENTER FineContrast Menu Auto Switch Enter Switch NOTE •Main Menu and FineContrast Menu cannot be activated at the same time. Entering the ScreenManager 1 Touch the Enter switch once to display the main menu of the ScreenManager. Making Adj
Resumen del contenido incluido en la página 19
3. ScreenManager 3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menu Sub menu Reference Screen Clock * 4-1. Screen Adjustment.. Phase * Position * Resolution * Range Adjustment * Smoothing Signal Filter * *1 Brightness 4-3.Color Adjustment. Color(Custom) Temperature Gamma Saturation Hue Gain 6 Colors Reset PowerManager DVI DMPM
Resumen del contenido incluido en la página 20
3. ScreenManager Tips • When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be activated. Exit Press the Enter switch to exit the menu. FineContrast Mode Selectable FineContrast modes are as follows. Mode Description sRGB To display the screen images based on those original colors (ex. over the Internet) Custom To adjust the color settings according to your preference CAL The mode only for calibration software FineContrast Menu [Ex.] Custom Enter Switc
