Resumen del contenido incluido en la página 1
Operation/Reference Guide
®
Modero 1200V
G4 Touch Panels
NXD-1200V and NXT-1200V
12” Modero Video Touch Panels
Touch Panels Last Revised: 10/1/2008
Resumen del contenido incluido en la página 2
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. � Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
Resumen del contenido incluido en la página 3
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are de
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
Table of Contents Table of Contents Introduction ........................................................................................................1 Modero Video Touch Panels (1200V-Series) ............................................................. 1 Product Specifications (NXD-1200V and NXT-1200V) .............................................. 2 1200V-Series Modero Connectors ............................................................................ 5 Cleaning the Touch Overlay .....
Resumen del contenido incluido en la página 6
Table of Contents Charging the NXT-BP batteries with the NXA-BASE/B ................................................. 29 NXT-CHG Battery Charger Kit (FG2255-50K) ......................................................... 29 Product Specifications .................................................................................................. 30 Powering the NXT-CHG ................................................................................................ 30 Reading NXT-CHG LED Indicator .
Resumen del contenido incluido en la página 7
Table of Contents Hot Swapping ............................................................................................................... 59 Configuring a Wireless Connection......................................................................... 60 Step 1: Configuring the Panel’s Wireless IP Settings.............................................. 60 Wireless communication using a DHCP Address ........................................................... 60 Wireless communication using a Stat
Resumen del contenido incluido en la página 8
Table of Contents Project Information Page............................................................................................... 96 Panel Information Page ................................................................................................. 97 Time & Date Setup Page ............................................................................................... 98 Volume Page .....................................................................................................
Resumen del contenido incluido en la página 9
Table of Contents Input mask next field characters ................................................................................. 179 Input mask operations................................................................................................. 179 Input mask literals ....................................................................................................... 179 Input mask output examples......................................................................................
Resumen del contenido incluido en la página 10
Table of Contents vi 1200V Modero Video Touch Panels
Resumen del contenido incluido en la página 11
Introduction Introduction AMX has taken a great leap forward with the release of their new 1200V-Series of Modero touch panels. These panels offer the ability to display Composite video, 802.11g communication, and USB support for extended input devices, and panel programming via a mini-USB port. The new G4 graphics and Video technology is supported by the release of the latest TPDesign4 Touch Panel Design Program. These video-capable panels support several video formats: NTSC, SECAM, and PAL
Resumen del contenido incluido en la página 12
Introduction Product Specifications (NXD-1200V and NXT-1200V) The following table outlines the specifications for 1200V-Series of 12" Modero panels. 1200V Panel Specifications Dimensions (HWD): � NXD-1200V (with faceplate): 12.38" x 12.59" x 3.25" (31.43 cm x 31.97 cm x 8.25 cm) � NXT-1200V (Fully raised): 10.91" x 12.34" x 12.50" (27.70 cm x 31.33 cm x 31.75 cm) � NXT-1200V (Fully lowered): 6.77" x 12.34" x 12.50" (17.20 cm x 31.33 cm x 31.75 cm) � CB-TP12 (conduit/wallbox): 11.52" x 11
Resumen del contenido incluido en la página 13
Introduction 1200V Panel Specifications (Cont.) Button Assignments: Button assignments can only be adjusted in TPD4 and not on the panels. � Button channel range: 1 - 4000 button push and Feedback (per address port) � Button variable text range: 1 - 4000 (per address port) � Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State) � Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535) � Address port range: 1 - 100 Front Panel Components: Light sensor
Resumen del contenido incluido en la página 14
Introduction 1200V Panel Specifications (Cont.) Rear Panel Components (Side panel location on NXD-Wall Mount panels) (Cont.): Stereo Output connector: � Stereo output through a 3.5mm mini-jack (for use with external speakers). USB connector (2): � The two Type-A USB ports can connect up to two external keyboard or mouse devices for use with Virtual PC applications. Mini-USB connector: � 5-pin Mini-USB connector used for programming, firmware update, and touch panel file transfer between the
Resumen del contenido incluido en la página 15
Introduction 1200V Panel Specifications (Cont.) Other AMX Equipment (Cont.): � NXA-RK12 (FG2904-50) - RackMount kit for 12" Wall Mount touch panels (NXD models only). � NXT-BP (FG2250-10) - Battery pack for Table Top panels. Provides 4 hours of continual operation (NXT models only) � NXT-CHG (FG2250-50) - Battery charger for NXT-BP batteries. Charges batteries in 8 hours. � Upgrade Compact Flash (factory programmed with firmware): NXA-CFTPV256M - 256 MB V/VG compact flash card (FG2116-43) NXA
Resumen del contenido incluido en la página 16
Introduction Connecting and Using Input Devices The 1200V panel can have up to two USB-capable input devices connected for use on its different firmware and TPD4 panel pages. These input devices can consist of a keyboard or mouse. USB-connected input devices are not detected and recognized by the panel until power is cycled to the unit. A mini-USB connection is only detected after it is installed onto an active panel. Connection to a previously powered panel, allows the PC to detect the pan
Resumen del contenido incluido en la página 17
Touch Panel Accessories Touch Panel Accessories The following section outlines and describes both the included accessories and other AMX equipment available for these touch panels. NXA-AVB/ETHERNET Breakout Box (FG2254-10) The NXA-AVB/ETHERNET Breakout Box (FIG. 3) is included as part of the 1200V Kit configuration (panel and box) but can be purchased as a separate accessory. This box facilitates the installation and distribution of video, data, and audio to Modero touch panels located up to
Resumen del contenido incluido en la página 18
Touch Panel Accessories NXA-AVB/ETHERNET Specifications (Cont.) Rear Components: � 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio � 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio � BNC connector (female) for Composite or Chroma (for video-capable panels only) � BNC connector (female) for luminance (for video-capable panels only) � RJ-45 connector for Ethernet input from the control system � 2-pin 3.5 mm Phoenix connector for in-bound power Included
Resumen del contenido incluido en la página 19
NXA-AVB/ETHERNET Breakout Box Touch Panel Accessories The breakout box unit can be mounted on either a horizontal flat surface or into an equipment rack (by removing the front screws and attaching it to an optional AC-RK). The power supply being used on the NXA-AVB/ETHERNET is dependant on the power requirements of the target touch panel. Use a standard CAT5 Ethernet cable to provide both communication and 10/100 network connectivity between the panel, NXA-AVB/ETHERNET, NetLinx Master, and th
Resumen del contenido incluido en la página 20
Touch Panel Accessories �PWR: 2-pin mini-Phoenix connector that connects to a 12 VDC-compliant power supply. This port can be used to provide power to a Modero panel by sending it through the NXA-AVB/ETHERNET (rear power connector through to the front power connector). Wiring the NXA-AVB/ETHERNET for Unbalanced Audio Most domestic audio equipment has unbalanced audio inputs and outputs. This means that the audio output (left, right, or mono) appears on a single wire, and is referenced to "0
