Resumen del contenido incluido en la página 1
SyncMaster 940UX
Install driver Install programs
Resumen del contenido incluido en la página 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference o
Resumen del contenido incluido en la página 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the
Resumen del contenido incluido en la página 4
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monit
Resumen del contenido incluido en la página 5
bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface.The installation of the bracket must be done by a qualified professional. Installing a wall bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device s
Resumen del contenido incluido en la página 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners,
Resumen del contenido incluido en la página 7
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock o
Resumen del contenido incluido en la página 8
When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy saving mode or set a screensaver to a changing picture when away from the monitor for an extended period of time. Adjust the resolution and frequency to the level appropriate for the model. An inappropriate resolution may cause undesirable picture quality. 19 inch (48 cm) - 1280 x 1024 Viewing the monitor continuously at a too close angle may result in
Resumen del contenido incluido en la página 9
When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your monitor to fall, and become damaged or cause personal injury. Good Postures When Using the Monitor Try to maintain a good posture when using the monitor. Keep your back straight. Keep a distance of about 45 ~ 50 cm between your eyes and the monitor screen. Look at the screen from slightly above it, and have the monitor directly in front of you.
Resumen del contenido incluido en la página 10
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor With stand Monitor & Sliding Stand Manual
Resumen del contenido incluido en la página 11
User's Guide, Warranty Card Quick Setup Guide Monitor Driver, (Not available in all locations) Natural Color software Cable D-sub Cable Power Cord USB Cable Sold separately DVI-D Cable Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright™ is a new feature providing optimum viewing environment MagicBright™ [ ] depending on the contents of the image you are watching. Currently seven differ
Resumen del contenido incluido en la página 12
Sport, Movie and Dynamic Contrast. Each mode has its own pre- configured brightness value. You can easily select one of seven settings by simply pressing MagicBright™ control button. 1) Custom Although the values are carefully chosen by our engineers, the pre- configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Text For documentations or work involving a lot of text. 3) Inte
Resumen del contenido incluido en la página 13
Rear (The configuration at the back of the monitor may vary from product to product.) ON [ | ] / OFF [O] Switch the monitor on and off. POWER Connect the power cord for your monitor to the POWER on the back of the monitor. Connect the of the monitor and the USB of the computer with the USB cable. Connect the of the USB monitor and a USB device with the USB cable. To use ( ) , you have to connect the ( ) to the PC. Make sure t
Resumen del contenido incluido en la página 14
RGB IN Connect the signal cable to the 15-pin, on the back of your RGB IN monitor. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. See Connecting the Monitor for further information regardi
Resumen del contenido incluido en la página 15
Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI IN port on the back of your monitor. [
Resumen del contenido incluido en la página 16
Connecting USB You can use a USB device such as a mouse, keyboard, Memory Stick or external hard disk drive by connecting them to the of the monitor without connecting them to the PC. The USB of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps Connect the of the monitor and the USB of the computer with the USB cable. To use , you have to connect the to the PC. Make sure to use the USB cable supplied wi
Resumen del contenido incluido en la página 17
The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. Some products do not follow the USB standard, and it may cause a malfunction of the device. If the device malfunctions even if it is connected to the computer, contact the service center of the device/computer. USB monitor You can use this product as a monitor simply by connecting the power cable and the USB cable to your PC. Minimum hardware
Resumen del contenido incluido en la página 18
Click I Accept. 2. The installation is started automatically and the installation progress window is displayed, as shown in the 3. figure below. Manual Installation: If the USB driver is not installed automatically, insert the provided USB Monitor Install CD into the CD-ROM drive of your PC. ‘Double-click My Computer on the Windows Desktop and click on User Manual (I:). The volume name of the removable storage disk (for example, E:, F:, G: ) may be different depend
Resumen del contenido incluido en la página 19
5-3. Arrange the monitors displayed in the 'Display Properties' window in the order they are actually used. Then click "OK" button. 5-4. Configuring the USB Monitor Display Information 1. When the driver setup for the USB monitor is finished, a monitor icon is created in the system tray at the bottom of the monitor screen. Click the monitor icon to display a list of connected USB monitors. 2. Example) The following figure shows when two US
Resumen del contenido incluido en la página 20
Checking the configuration After the installation, you can check the configuration by following these steps. 1. 'Right-click ‘My Computer’, and select ‘Properties’ – ‘System Properties’ – the ‘Hardware tab’. 2. Click ‘Device Manager’. 3. A list of the installed device will be displayed, as shown in the figure below. The Initial Screen Settings after Installing the Program Applicable mode: Extend mode Mode position: To the right of the primary sc
