Resumen del contenido incluido en la página 1
LCD MONITOR
quick start guide
2032GWPLUS, 2232BWPLUS
Resumen del contenido incluido en la página 2
Model Features RTA Monitor RTA (Response Time Accelerator) A function that accelerates the response speed of the panel so as to provide a sharper and more natural video display. RTA On Activates the RTA function so that the panel operates at a higher response speed than its original speed. RTA OFF Deactivates the RTA function so that the panel operates at its original response speed. Package Contents Please make sure the following items are included with your monito
Resumen del contenido incluido en la página 3
Warranty Card User's Guide, Monitor Driver, Quick Setup Guide (Not available in all Natural Color software, locations) MagicTune™ software Cable Power Cord D-sub Cable Others Cleaning Cloth Will be applied to black and high gloss models only. Sold separately DVI Cable Your Monitor Front
Resumen del contenido incluido en la página 4
MENU button [ ] Opens the on-screen menu and exits from the menu. MagicBright™ button MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently seven different modes are available: Custom, Text, Internet, Game, Sport, Movie and Dynamic Contrast. Each mode has its own pre-configured brightness value. You can easily select one of seven settings by simply pressing MagicBright™ control button. 1) Cus
Resumen del contenido incluido en la página 5
Adjust buttons [ ] Adjust items in the menu. Enter button [ ] / Activates a highlighted menu item. / SOURCE button Push the 'SOURCE', then selects the video signal while the OSD is off. (When the SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.) If you select the digital mode, you must connect your monitor to the graphic card's DVI IN port using the DVI cable. AUTO button U
Resumen del contenido incluido en la página 6
Model Connecting Cables Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate to the computer you are using. Using the D-sub (Analog) connector on the video card. - Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [RGB IN] Using the DVI (Digital) connector on the video card. - Connect the DVI Cable to the DVI IN port on the
Resumen del contenido incluido en la página 7
You can tilt the monitor upwards at an angle of 0° to18°.
Resumen del contenido incluido en la página 8
Model Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom Check List Solutions No images on the Is the power cord Check the power cord connection and supply. screen. connected I cannot turn on properly? the monitor. Can you see (Connected using the D-sub cable) "Check Signal Check the signal
Resumen del contenido incluido en la página 9
indicator on the restore the image on the screen. monitor blinking at 1 second intervals? If there is still no image, press the 'SOURCE/ ' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen. Connected using You may get a blank screen if you boot the system the DVI cable? before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out
Resumen del contenido incluido en la página 10
reads See the video card Install the monitor driver according to the Driver "Unrecognized manual to see if the Installation Instructions. monitor, Plug & Plug & Play (VESA Play (VESA DDC) DDC) function can monitor found". be supported. Check when MagicTune™ * To check whether your PC is available for MagicTune™ MagicTune™ does feature is found only feature, follow the steps below (When Windows is XP); not function on PC (VGA) with → → properly. Window OS that Control Panel Performance
Resumen del contenido incluido en la página 11
Windows ME/2000 : Set the resolution in the Control Panel → Display → Settings. Contact the video card manufacturer for details. How can I set the Power Saving function? Windows XP : → Set the resolution in the Control Panel → → Appearance and Themes Display Screen Saver. Set the function in the BIOS-SETUP of the computer. Windows ME/2000 : → → Set the resolution in the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. Refer
Resumen del contenido incluido en la página 12
Environment The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor. Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or
