Resumen del contenido incluido en la página 1
FLAT WIDE DISPLAY MONITOR
FWD-S47H1/S42H1
PROTOCOL MANUAL (For Customer)
Resumen del contenido incluido en la página 2
Table of Contents 1. RS-232C 3. ID Talk 1. Communication Parameters ............................................... 1 1. DefaultSetting .................................................................. 33 2. Pin Assignment ................................................................... 1 2. SettingItems ..................................................................... 34 3. Communication DataFormat ............................................. 1 3. Packet Structure ....
Resumen del contenido incluido en la página 3
Section 1 RS-232C 1. CommunicationParameters Communication method RS-232C Synchronous method Asynchronous Baud rate 9600bps Character length 8bit Parity None Start bit length bit Stop bit length bit Flow control None 2. Pin Assignment Monitor side (D-sub 9-pin) Host side (D-sub 9-pin) 5 4 3 2 1 5 4 3 2 1 9 8 7 6 9 8 7 6 _ External view _ _ External view _ Pin No. Function Pin No. Function 1 NC 1 NC 2 TXD 2 RXD 3 RXD 3 TXD 4 NC 4 NC 5 GND 5 GND 6 NC 6 NC 7 NC 7 NC 8 NC 8 NC 9 NC 9
Resumen del contenido incluido en la página 4
(b) Enquiry message No. Item Value Header 0x83: Enquiry 2 Category 0xXX 3 Function 0xXX 4 Data 0xFF 5 Data2 0xFF 6 Check Sum 0xXX * Check Sum: Sum total of to X, lower one-byte data is validated when a value exceeds 255 (byte). (c) Answermessage 1 Controlanswer No. Item Value Header 0x70: Answer * 2 Answer 0x00: Completed 0x0: Limit Over 0x02: Limit Under 0x03: Command Canceled 3 Check Sum 0xXX * 0x00: Completed Packet is correctly received and process is als
Resumen del contenido incluido en la página 5
4 Error answer No. Item Value Header 0xE0: Answer * 2 Answer 0x00: No Function Error 0x0: Check Sum Error 0x02: Data Length Error 3 Check Sum 0xXX * 0x00: No Function Error Packet header,category or function code are not included in this protocol. 0x0: Check Sum Error Check sum value of received packet is not correct. 0x02: Data Length Error The data size of received packet is not correct. 4. General Function (a) Mode Control Syntax Header Category Function Data1 Data2
Resumen del contenido incluido en la página 6
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x06 Color System 0x00 Auto Yes Yes Disable Enable 0x0 NTSC 0x02 NTSC4.43 0x03 PAL 0x05 PAL-M 0x06 PAL-N 0x07 PAL60 0x0F Language 0x00 Japanese Yes Yes Disable Enable 0x0 English 0x02 Deutsch 0x03 Français 0x04 Español 0x05 Italiano 0x0 Index Number 0x0-0xFF Yes Yes Disable Enable 0x2 Standby Power 0x00 Stand
Resumen del contenido incluido en la página 7
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x26 Auto Shut OFF 0x00 OFF Yes Yes Disable Enable 0x0 ON 0x27 Auto Screen Adjust 0x00 OFF Yes Yes Disable Enable 0x0 ON 0x30 PAP 0x00 OFF Yes Yes Disable Enable 0x0 P&P 0x02 PinP 0x3 Active Picture 0x00 Left (P&P)/Main (PinP) Yes Yes Disable Enable 0x0 Right (P&P)/Sub (PinP) 0x02 Swap 0x32 Picture Size (P&P) 0x00-0x0E Yes Yes Disable Enable 0x33 Sub Pict
Resumen del contenido incluido en la página 8
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x40 Screen Saver 0x00 OFF Yes Yes Disable Enable 0x0 All White ON 0x02 Sweep ON 0x03 Standby 0x43 Back Light 0x00-0x64 Yes Yes Disable Enable 0x44 Logo Illumination 0x00 Logo Off Yes Yes Enable Enable 0x0 Logo On (Low) 0x02 Logo On (High) 0x45 Control Mode 0x00 Main + Remocon Yes Yes Disable Enable 0x0 Main 0x02 Remocon 0x03 All O
Resumen del contenido incluido en la página 9
Code Table(1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby PowerOn 0x67 IP Setting Result 0x00 Done Yes No Enable Enable 0x0 Error (UAR T Commu.) 0x02 Error 2 (Duplication) 0x03 Error 3 (IP Add Setting) 0x04 Error 4 (GW Add setting) 0x05 Error 5 (DNS Setting) 0x06 Error 6 (DNS2 Setting) 0x07 Error 7 (Sbnt Msk Setting) 0x68 Speed Setting 0x00 00Mbps/Full Duplex Yes Yes Enable Enable 0x0 00Mbps/Hal
Resumen del contenido incluido en la página 10
Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x7E On Screen Logo 0x00 OFF Yes Yes Enable Enable 0x0 ON (Default) 0x02 Reserved 0x7F LED 0x00 OFF Yes Yes Disable Enable 0x0 ON 0x8 Power On Delay 0x00-0x78 sec x Data Yes Yes Enable Enable *: Auto Signal Detect becomes Disable. When Option Slot is connected, Option command is Enable. *2: Restricts a part of keys operation following below. [Remote Commander] Menu, Picture, S
Resumen del contenido incluido en la página 11
6. Priority Signal Select Function (a) ModeControl Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 Code Table (2-a) [a] Code Table (2-d) 0xFF 0xXX Answer Header Answer Returnto Data Size Return Data1 Data2 Check Sum Enquiry 0x70 0x00 0x02 Code Table (2-a) [b] 0xFF 0xXX Completed Code Table (2-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x77 Priority Signal Select 0x00 Input Auto No Yes Disable Ena
Resumen del contenido incluido en la página 12
Year Set Syntax Header Category Function Data1 Data2 Check Sum Control 0x8C 0x00 0x7B 0x02 Year: 0x00-0x63 0xXX Syntax Header Category Function Data1 Data2 CheckSum Enquiry 0x83 0x00 0x7B 0xFF 0xFF 0xFC Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed 0x70 0x0 0x7 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Returnto DataSize ReturnData1 Check Sum Enquiry 0x70 0x00 0x02 Year: 0x00-0x
Resumen del contenido incluido en la página 13
Code Table(1-e) Week Select 0x00 Sunday 0x0 Monday 0x02 Tuesday 0x03 Wednesday 0x04 Thursday 0x05 Friday 0x06 Saturday On Timer, Off Timer Syntax Header Category Function Data1 Data2 Data3 Check Sum Control 0x8C 0x00 Code Table (-f) [a] 0x03 Hour: 0x00-0x7 Minute: 0x00-0x3B 0xXX Syntax Header Category Function Data1 Data2 CheckSum Enquiry 0x83 0x00 Code Table (-f) [a] 0xFF 0xFF 0xXX Answer Header Answer Check Sum Control 0x70 0x00 0x70 Completed
Resumen del contenido incluido en la página 14
(d) IP Address Setting IP Address Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x42 0x05 Address 0 Address Address 2 Address 3 0xXX 0x00-0xFF 0x00-0xFF 0x00-0xFF 0x00-0xFF Syntax Header Category Function Data1 Data2 CheckSum Enquiry 0x83 0x00 0x42 0xFF 0xFF 0xC3 Subnet Mask Syntax Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Control 0x8C 0x00 0x6 0x05 Address 0 Address Address 2 Address
Resumen del contenido incluido en la página 15
Player IP Address Syntax Header Category Function Data1 Data2 Check Sum Enquiry 0x83 0x00 0x83 0xFF 0xFF 0x04 Answer Header Answer CheckSum Control 0x70 0x00 0x70 Completed 0x70 0x03 0x73 Command Canceled Answer Header Category Function Data1 Data2 Data3 Data4 Data5 Check Sum Enquiry 0x8C 0x00 Code Table 0x05 Address 0 Address Address 2 Address 3 0xXX (-a)[a] 0x00-0xFF 0x00-0xFF 0x00-0xFF 0x00-0xFF IP Address ex) 92.28.4. → 92 (
Resumen del contenido incluido en la página 16
Code Table(2-a) [a]Function [b]Range/Switch code Command Control Enquiry Standby Power On 0x00 Contrast 0x00-0x64 Yes Yes Disable Enable 0x0 Brightness 0x00-0x64 Yes Yes Disable Enable 0x02 Chroma 0x00-0x32 Yes Yes Disable Enable 0x03 Phase 0x00-0x64 Yes Yes Disable Enable 0x04 Color Temp 0x00 Cool Yes Yes Disable Enable 0x0 Neutral 0x02 Warm 0x03 Custom 0x09 Sharpness 0x00-0x4 Yes Yes Disable Enable 0x0A NR 0x00 OFF Yes Yes Disable Enable 0x0 Low
Resumen del contenido incluido en la página 17
Code Table (2-a) [a]Function [b]Range/Switchcode Command Control Enquiry Standby PowerOn 0x36 Default Volume Set 0x00-0x64 Yes Yes Enable Enable 0x37 Volume Select 0x00 Last Memory Yes Yes Enable Enable 0x0 Default Setting 0x38 Max Volume Set 0x32 50 Yes Yes Enable Enable 0x46 70 0x64 00 * Picture Mode = Vivid Only is Enabled. *2 Sound Mode = Custom Only is Enabled. (c) Color Temp Syntax Header Category Function Data1 Data2 Data3 Check
Resumen del contenido incluido en la página 18
8. Size/Shift (a) 8Bits Register Syntax Header Category Function Data1 Data2 CheckSum Control 0x8C 0x20 Code Table (3-b) [a] 0x02 Code Table (3-b) [b] 0xXX Enquiry 0x83 0xFF 0xFF 0xXX Answer Header Answer CheckSum Control 0x70 0x00 0x70 Completed 0x70 0x0 0x7 Limit Over 0x70 0x02 0x72 Limit Under 0x70 0x03 0x73 Command Canceled Answer Header Answer Returnto Data Size Return Data1 CheckSum Enquiry 0x70
Resumen del contenido incluido en la página 19
Code Table (3-b) [a]Function [b]Range/Switch code Command Control Enquiry Standby PowerOn 0x06 Auto Pixel Adjust 0xFF Execute Yes No Disable Enable 0x07 Dot Phase 0x00-0xF Yes Yes Disable Enable 0x0B Multi Position 0x00 Position Yes Yes Disable Enable * (2 x 2 , x 2, 2 x ) 0x0 Position2 0x02 Position3 0x03 Position4 0x0C Multi Position 0x00 Position Yes Yes Disable Enable * (3 x 3, x 3, 3 x ) 0x0 Position2 0x02 Posit
Resumen del contenido incluido en la página 20
*1 Arrangement of Multi Position. MultiPosition (2 x2) MultiPosition (1 x 2) Multi Position (2 x 1) 1 2 1 1 2 3 4 2 Multi Position(3 x 3) Multi Position (1 x 3) MultiPosition (3 x 1) 1 2 3 1 1 2 3 4 5 6 2 3 7 8 9 MultiPosition (4 x 4) MultiPosition (1 x4) Multi Position (4 x 1) 1 2 3 4 1 1 2 3 4 5 6 7 8 2 9 10 11 12 3 13 14 15 16 4 FWD-S42H 8
