Resumen del contenido incluido en la página 1
LMC5601C-VDSL2
HDMCII VDSL2 LAN Extender Module (Extended Temp)
Use existing phone-grade wiring to support
high-bandwidth Ethernet connections.
Resumen del contenido incluido en la página 2
FCC and IC RFI Statements FCC and Industry Canada RF Interference Statements Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. This equipment generates, uses, and c
Resumen del contenido incluido en la página 3
Certifications Certifications Class 1 Laser product, Luokan 1 Laserlaite, Laser Klasse 1, Appareil A’Laser de Classe European Directive 2002/96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste. This symbol indicates that the equipment should be disposed of separately from regular household waste. It is the consumer’s responsibility to dispose of this and all equipment so marked t
Resumen del contenido incluido en la página 4
Table of Contents Table of Contents Part Numbers ...................................................................................................... 5 1. Specifications ......................................................................................... 6 2. Overview: About the HDMCII VDSL2 LAN Extender Module (Extended Temp).................................................................................... 7 3. Configuration...................................................
Resumen del contenido incluido en la página 5
Part Numbers Part Numbers Part Number Description LMC5601C-VDSL2 HDMCII VDSL2 LAN Extender Module (Extended Temp) LMC5601C-VDSL2 724-746-5500 | blackbox.com Page 5
Resumen del contenido incluido en la página 6
Chapter 1: Specifications 1. Specifications DC Input 662 mA @ 5V Operating Temperature -40°F to +185°F (-40°C to +85°C) Storage Temperature -67°F to +257°F (-55°C to +125°C) Humidity 5% to 95% (non-condensing); 0 to 10,000 ft. altitude Dimensions Single Slot SNMP Manageable Modules Page 6 724-746-5500 | blackbox.com LMC5601C-VDSL2
Resumen del contenido incluido en la página 7
Chapter 2: Overview 2. Overview: About the HDMCII VDSL2 LAN Extender Module (Extended Temp) HDMCII VDSL2 LAN Extender Module (Extended Temp) enables LAN and Campus network managers, and service providers, to use an existing phone- grade wiring to support high bandwidth Ethernet connections. Industry standard 2Base-TL provisions symmetric data delivery over the outside plant defined by IEEE802.3ah. 10Pass-TS transport is designed to meet short- range, high data rate requirements over st
Resumen del contenido incluido en la página 8
Chapter 3: Configuration 3. Configuration HDMCII VDSL2 LAN Extender Module (Extended Temp) includes various user-configurable features. These features are selectable by using DIP Switches and software. The following sections describe the DIP Switches for the Host CO and Remote CPE module configuration. 3.1 DIP Switch Settings The DIP Switches allow the user to configure most of the module features before installing the unit. These also enable the Host to Remote management channel u
Resumen del contenido incluido en la página 9
Chapter 3: Configuration Switch # Feature Function Default 1 HOST HOST=OFF / Remote=ON OFF 2 LFPT On= Link Fault Pass-Through Enabled OFF 3 FL ON= Fault Loopback Enabled OFF On= Asymmetric 998 with ISDN 4 Band Plan OFF Off= Symmetric 997 with ISDN 5 AN On= Auto Negotiation ON ON 6 Flow Control On= Flow Control ON ON On= Selectively advertises Speed 7 Selective AN OFF Duplex if AN is enabled 8 Duplex OFF= Full Duplex / ON= Half Duplex OFF 9 Speed On= 100Mbps / Off= 10Mbps OFF
Resumen del contenido incluido en la página 10
Chapter 3: Configuration when Auto Negotiation is not desired by configuring using DIP Switches #8 and #9. 3.5 Auto Negotiation The HDMCII VDSL2 LAN Extender Module (Extended Temp) ships from the factory with Auto Negotiation enabled on the DATA port. In this mode, the DATA port negotiates for speed and duplex (i.e., the module detects 10 Mbps Full-Duplex, 10 Mbps Half-Duplex, 100 Mbps Full-Duplex or 100 Mbps Half-Duplex with Flow Control). Configure Auto Negotiation on an HDMCII VD
Resumen del contenido incluido en la página 11
Chapter 3: Configuration 2 Traps can also be set in the iView software. A Trap will be generated on any Loss of Signal (LOS); but more importantly, the end user can set a VDSL Quality Level that will generate a trap if the line fails below the assigned level. 3.8 LINK Quality Link Quality is defined by 4 values: 8,4,2,1. The four green LEDs form a binary code indicating the maximum bandwidth the VDSL line can support. The appropriate LED will light once the line quality is dyna
Resumen del contenido incluido en la página 12
Chapter 3: Configuration 3.10 Forcing the Data Port Speed The DATA port can be manually configured on HDMCII VDSL2 LAN Extender Module (Extended Temp) for 10 Mbps or 100 Mbps operation. Before manually setting the speed, disable Auto Negotiation (Set DIP Switch #5 to the OFF position.) • 10 Mbps for the DATA port is configured by setting DIP Switch #9 to the OFF position (default). • Configure the DATA port for 100 Mbps operation by setting DIP Switch #9 to the ON position. 3.11 Flo
Resumen del contenido incluido en la página 13
Chapter 4: Install the HDMCII VDSL2 LAN Extender Module (Extended Temp) 4. Install the HDMCII VDSL2 LAN Extender Module (Extended Temp) Before installing an HDMCII VDSL2 LAN Extender Module (Extended Temp), set the options using the DIP Switches (refer to the DIP Switch Settings section for more information). Install HDMCII VDSL2 LAN Extender Module (Extended Temp) in any Black Box High-Density Media Converter System II chassis. Each module requires one slot in the chassis; always us
Resumen del contenido incluido en la página 14
Chapter 5: Operation 5. Operation 5.1 LED Operation Each module features diagnostic LEDs that provide information on features and ports. LED Function VDSL2 RAI The Remote Alarm Indication LED is YELLOW when the unit at the far end of the Unit has an alarm FL Fault Loopback will be ON GREEN if this function is enabled and BLINK if it is actively inhibiting the Ethernet port due to a LOS of the VDSL line LOS The LOS LED is RED when the VDSL port is down. ER The ERROR LED will Blin
Resumen del contenido incluido en la página 15
Chapter 5: Operation 5.2 Maximum Bandwidth HDMCII VDSL2 LAN Extender Module (Extended Temp) Link LEDs The standard single pair HDMCII VDSL2 LAN Extender Module (Extended Temp) unit will provide the following Rate/Reach performance under the best conditions and still maintain a BER > 10^-9 performance over single pair 24 AWG (0.5mm) twisted wire. HDMCII VDSL2 LAN Extender Module (Extended Temp) Rate/Reach Distance Link Link Link Link BW 997 BW 998
Resumen del contenido incluido en la página 16
Chapter 5: Operation When the Ethernet port is connected at 10BaseT, the VDSL2 line will be limited to 10 Mbps operation and will indicate a RANGE of 5500 feet or less for all length lines. 5.3 RJ-45 Data Port Pinout (MDI) The following table lists the pin configuration for the RJ-45 Data connector. Pin Signal 1 Transmit+ 2 Transmit- 3 Receive+ 4 No Connection Pin 1 5 No Connection 6 Receive- 7 No Connection 8 No Connection 5.4 RJ-11 Port Pinout VDSL ports are supported
Resumen del contenido incluido en la página 17
Chapter 5: Operation 5.5 Link Fault Pass-Through FL LNK LNK FL LNK LNK TIP TIP TX VDSL2 VDSL2 TX RING RING LNK LNK LFPT LFPT B RAI RAI When a 10/100BaseT port is lost, the unit sends a fault signal (RAI) to the VDSL line. If the LFPT function is enabled at the Far End VDSL port receiving this fault indication, the far end unit will drop the link on the 10/100BaseT port and BLINK the LFPT LED. This function must be enabled at both ends of the VDSL line for this to function in both d
Resumen del contenido incluido en la página 18
Chapter 6: Troubleshooting 6. Troubleshooting The most common failure of a VDSL line is its slow degradation over time due to aging of the line or increased line noise as additional service is added to the same Line bundle. To help detect this degradation over time, the unit provides a user-defined Minimum Quality Level. Once this level is reached, the unit will send an SNMP TRAP indication for low line quality. This can be used to provide an advanced notice to the customer of a pote
Resumen del contenido incluido en la página 19
Chapter 7: Contacting Black Box 7. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day, 7 days a week. Call: 724-746-5500 or Fax: 724-746-0746 Mail order: Black Box Corporation 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com E-mail: info@blackbox.com LMC5601C-VDSL2 724-746-5500 | blackbox.com Page 19
Resumen del contenido incluido en la página 20
Chapter 8: Fiber Optic Cleaning Guidelines 8. Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust, which can obstruct the optic path and cause performance degradation. Good system performance requires clean optics and connector ferrules. 1. Use fiber patch cords (or connectors, if you terminate your own fiber) only from a reputable supplier; low-quality components can cause many hard-to- diagno
