Resumen del contenido incluido en la página 1
775S61
User Manual
Version 1.0
Published September 2004
Copyright©2004 ASRock INC. All rights reserved.
1 1
1 1 1
Resumen del contenido incluido en la página 2
Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trademarks or copyrights of their respective companies, and are used only for identif
Resumen del contenido incluido en la página 3
Contents Contents Contents Contents Contents 1 Introduction 1 Introduction 1 Introduction 1 Introduction 1 Introduction.................................................... .................................................... .................................................... .................................................... .................................................... 4 4 4 4 4 1.1 Package Contents ........................................................... 4 1.2 Specifications ....
Resumen del contenido incluido en la página 4
Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Thank you for purchasing ASRock 775S61 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. Chapter 1 and 2 of this manual contain introduction of the motherboard and step-by- step installation guide for new DIY system b
Resumen del contenido incluido en la página 5
1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications Platform: Micro ATX Form Factor: 9.6-in x 9.0-in, 24.4 cm x 22.9 cm CPU: 775-Pin Socket ® ® ® supporting Intel Pentium 4 / Celeron processor (in 775-land LGA package) Chipsets: North Bridge: SiS 661FX chipset, FSB @ 800/533MHz, supports Hyper-Threading Technology (see CAUTION 1) South Bridge: SiS 963L chipset, supports USB 2.0, ATA 133 VGA: SiS Real256E, 32MB-64MB VRAM (share memory) Memory: 3 DDR DI
Resumen del contenido incluido en la página 6
1 RJ 45 port; 4 default USB 2.0 ports; Audio Jack: Line Out / Line In / Microphone + Game port BIOS: AMI legal BIOS; Supports “Plug and Play”; ACPI 1.1 compliance wake up events; CPU frequency stepless control (only for advanced users’ reference, see CAUTION 5) ® ® OS: Microsoft Windows 98SE / ME / 2000 / XP compliant CAUTION! 1. About the setting of “Hyper Threading Technology”, please check page 23. 2. While CPU overheat is detected, the system will automatically shutdown. Please check if the
Resumen del contenido incluido en la página 7
1 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 2 3 4 6 1 5 22.9cm (9.0 in) PS2_USB_PWR1 1 PS/2 Mouse CPU_FAN1 PS/2 Keyboard 7 VGA LAN USB 2.0 Ports 8 USB 2.0 Ports SIS ` 9 Line out 661FX Line Chipset Line in In 2Mb Mic Mic in In BIOS 0 1 2 3 4 5 25 IDE2 IDE1 1.5V_AGP1 ATA133 LAN PHY PCI 1 24 SIS 963L 23 CD1 AUX1 PCI 2 10 AUDIO1 1 22 775S61 USB45 CMOS 1 5.1CH Battery 11 JR1 JL1 AUDIO PCI 3 USB2.0 21 CODEC PANEL 1 PLED PWRBTN IR
Resumen del contenido incluido en la página 8
TM TM TM TM TM 1.4 ASRock I/O 1.4 ASRock I/O 1.4 ASRock I/O 1.4 ASRock I/O 1.4 ASRock I/O 1 Parallel Port 6 Line Out (Lime) 2 RJ-45 Port 7 USB 2.0 Ports 3 Game Port 8 VGA Port 4 Microphone (Pink) 9 PS/2 Keyboard Port (Purple) 5 Line In (Light Blue) 10 PS/2 Mouse Port (Green) 8 8 8 8 8
Resumen del contenido incluido en la página 9
Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation 775S61 is a Micro ATX form factor (9.6" x 9.0", 24.4 x 22.9 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. 2.1 Screw Hol
Resumen del contenido incluido en la página 10
black line black line 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation 2.3 CPU Installation For the installation of Intel 775-Pin CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-Pin CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1. O
Resumen del contenido incluido en la página 11
For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion. Step 2-4. Verify that the CPU is within the socket and properly mated to the orient keys. Step 3. Remove PnP Cap (Pick and Place Cap): Use your left hand index finger and thumb to support the load plate edge, engage PnP cap with right hand thumb and peel the cap from the socket while
Resumen del contenido incluido en la página 12
2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink 2.4 2.4 2.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink This motherboard is equipped with 775-Pin socket that supports Intel 775-Pin CPU. Please adopt the type of heatsink and cooling fan compliant with Intel 775-Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsin
Resumen del contenido incluido en la página 13
2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 2.5 Installation of Memory Modules (DIMM) 775S61 motherboard provides three 184-pin DDR (Double Data Rate) DIMM slots. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that
Resumen del contenido incluido en la página 14
2.6 Expansion Slots (PCI, AMR, and AGP Slots) 2.6 Expansion Slots (PCI, AMR, and AGP Slots) 2.6 Expansion Slots (PCI, AMR, and AGP Slots) 2.6 Expansion Slots (PCI, AMR, and AGP Slots) 2.6 Expansion Slots (PCI, AMR, and AGP Slots) There are 3 PCI slots, 1 AMR slot, and 1 AGP slot on 775S61 motherboard. PCI slots: The PCI slots are used to install expansion cards that have the 32-bit PCI interface. AMR slot: The AMR slot is used to insert an ASRock MR card with v.92 Modem functionality. AGP slot:
Resumen del contenido incluido en la página 15
2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup 2.7 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “SHORT”. If no jumper cap is placed on pins, the jumper is “OPEN”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “SHORT” when jumper cap is placed on these 2 pins. Jumper Setting Description 1_2 2_3 PS2_USB_PWR1 Short pin2, pin3 to enable (see p.7 item 1) +5VSB (standby) for PS/2 or +5V +5VSB
Resumen del contenido incluido en la página 16
2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors 2.8 Onboard Headers and Connectors Connectors are NOT jumpers. DO NOT place jumper caps over these connectors. FDD Connector (33-pin FLOPPY1) FLOPPY1 Pin1 (see p.7, No. 19) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE Connector (Blue) Secondary IDE Connector (Bla
Resumen del contenido incluido en la página 17
GND Front panel audio connector This is an interface for front +5VA BACKOUT-R (9-pin AUDIO1) panel audio cable that allows BACKOUT-L (see p.7 item 22) convenient connection and 1 control of audio devices. AUD-OUT-L GND AUD-OUT-R MIC-POWER MIC PLED+ System panel connector This connector accommo- PLED- PWRBTN# (9-pin PANEL1) dates several system front GND (see p.7 item 12) panel functions. 1 DUMMY RESET# GND HDLED- HDLED+ Chassis speaker connector This connector allows you 1 SPEAKER (4-pin SPE
Resumen del contenido incluido en la página 18
Chapter 3 BIOS Setup Chapter 3 BIOS Setup Chapter 3 BIOS Setup Chapter 3 BIOS Setup Chapter 3 BIOS Setup 3.1 BIOS Setup Utility 3.1 BIOS Setup Utility 3.1 BIOS Setup Utility 3.1 BIOS Setup Utility 3.1 BIOS Setup Utility This section explains how to configure your system using the BIOS Setup Utility. The Flash Memory on the motherboard stores the BIOS Setup Utility. When you start up the computer, there is a chance for you to run the BIOS Setup. Press during the Power-On-Self-Test (POST) to
Resumen del contenido incluido en la página 19
Navigation Key(s) Function Description Displays the General Help Screen Jumps to the Exit menu or returns to the upper menu from the current menu / Moves cursor up or down between fields / Selects menu to the left or right + / - Increases or decreases values Brings up a selected menu for a highlighted field Loads all the setup items to default value Saves changes and exits Setup 3.2 Main Menu 3.2 Main Menu 3.2 Main Menu 3.2 Main Menu 3.2 Main Menu Wh
Resumen del contenido incluido en la página 20
TYPE To set the type of the IDE device, first, please select “IDE Devices” on Main menu and press to get into the sub-menu. Then, select among “Primary IDE Master”, “Primary IDE Slave”, “Secondary IDE Master”, and “Secondary IDE Slave” to make configuration of its type. Below are the configuration options. AMIBIOSSETUPUTILITY-VERSION3.31a Main Primary IDE Master: [ SetupHelp ] Selecthowtosetthe parametersofdrive, Auto Type Cylinders Or Heads Select [AUTO]toset WritePrecompensation allHDD
