Manual de instrucciones de Vantec UGT-FW050

Resumen del contenido incluido en la página 1

4-Port FireWire 400
PCI Host Card


User Manual
Model: UGT-FW050



All brand names and trademarks are properties of their respective owners.

w w w . v a n t e c u s a . c o m

Resumen del contenido incluido en la página 2

Features and Benefits VIA VT6306 chipset PCI 32-bit 33MHz Interface Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface Specification 1.0 Supports data transfer rates of 100, 200 and 400 Mbps Hot-swapping features allows you to connect/disconnect devices without powering down your system Adds four IEEE 1394a (FireWire 400) ports to your PC for high-speed I/O connectivity and support up to 63 devices One (1) internal IEEE 1394a port (Sharing with first external I

Resumen del contenido incluido en la página 3

Package Contents 1 x 4-Port FireWire 400 PCI Host Card Adapter 1 x User’s Manual 1 x 1394a DV Cable (6-pin to 4-pin) Hardware Description Before installing the 4-Port FireWire 400 PCI Host Card, please see the photo below highlighting the available IEEE 1394aports of the card. Note: The Internal Port (P1)) shares with first External Port (P2). DO NOT use P1 and P2 at the   UGT-FW050 Page 3 

Resumen del contenido incluido en la página 4

same time. Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI slot. 4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord. Driver Installation Windows® 2000