Resumen del contenido incluido en la página 1
®
SUPER
X6DAT-G
X6DAi-G
USER’S MANUAL
Revision 1.0b
Resumen del contenido incluido en la página 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes to
Resumen del contenido incluido en la página 3
Preface Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X6DAT-G/X6DAi-G motherboard. Installation and maintenance should be performed by experienced technicians only. TM ® The X6DAT-G/X6DAi-G supports single or dual Intel Xeon EM64T processors at an 800 MHz front side bus speed. Please refer to the motherboard specifications pages on
Resumen del contenido incluido en la página 4
X6DAT-G/X6DAi-G User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview......................................................................................................... 1-1 Checklist .....................................
Resumen del contenido incluido en la página 5
Table of Contents Chassis Intrusion ................................................................................... 2-13 Universal Serial Bus.............................................................................. 2-13 Fan Headers........................................................................................... 2-14 Wake-On-Ring ......................................................................................... 2-15 Wake-On-LAN ...........................................
Resumen del contenido incluido en la página 6
X6DAT-G/X6DAi-G User's Manual Chapter 3: Troubleshooting 3-1 Troubleshooting Procedures ........................................................................ 3-1 Before Power On .................................................................................... 3-1 No Power .................................................................................................. 3-1 No Video ................................................................................................... 3-1 Memo
Resumen del contenido incluido en la página 7
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an ac- knowledged leader in the industry. Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Check that the following items have all been in- cluded with your motherboard. If anything listed here is damaged or miss- ing, contact your retailer. Note: Items listed below are incl
Resumen del contenido incluido en la página 8
Introduction X6DAT-G/X6DAi-G User's Manual Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermi
Resumen del contenido incluido en la página 9
Chapter 1: Introduction Figure 1-1. X6DAT-G/X6DAi-G Image Note: Marvell SATA is available on the X6DAT-G only. 1-3 Introduction
Resumen del contenido incluido en la página 10
Introduction J40 J23 JLAN1 JC2 JC1 JPAC X6DAT-G/X6DAi-G User's Manual Figure 1-2. X6DAT-G/X6DAi-G Motherboard Layout (not drawn to scale) 4-pin ATX PWR JPF J24 J1D1 FAN7 J1B4 Force Fan6 Fan5 PWR PW DIMM 1B Bank 1 DIMM 1A Bank 1 DIMM 2B Bank 2 CPU1 DIMM 2A Bank 2 DIMM 3B Bank 3 DIMM 3A Bank 3 DIMM 4B Bank 4 DIMM 4A Bank 4 CPU2 Mic JL1 J K 1 CD2CD1 BIOS J2 7 2 SATAI C JPS1 6300ESB 6041 USB2/3 J 2 2 JD2 SATA0 SATA1 SATA0 SATA1 SATA2 SATA3 Notes: 1. Jumpers not indicated are for test purposes onl
Resumen del contenido incluido en la página 11
Chapter 1: Introduction Quick Reference Jumper Description Default Setting JBT1 CMOS Clear (See Chapter 2) JK1 Keylock Enable Close (Enabled) JP13 3rd PWR Supply Failure Alarm Enab.Open (Disabled) JP15 Reboot Option Enable Open (Enabled) JPAC Audio Enable/Disable Pins 1-2 (Enabled) JPF Force Power On Open (Disabled) JPL1 Giga-bit LAN Enable/Disable Pins 1-2 (Enabled) JPS1(*X6DAT) Serial ATA Enabled Pins 1-2 (Enabled) JWD Watch Dog Enable Pins 1-2 (Reset) Connector Description J1B4 Primary 24-pi
Resumen del contenido incluido en la página 12
Introduction X6DAT-G/X6DAi-G User's Manual Motherboard Features CPU TM ® � Single or dual 604-pin Intel Xeon (EM64T) processors @ 800 MHz front side (system) bus speed. Memory � Eight 184-pin DIMM sockets supporting up to 16 GB ECC registered DDR333 or up to 32 GB ECC registered DDR266 SDRAM Note: Interleaved memory; requires memory modules to be installed in pairs (see Section 2-3 for details). Chipset � Intel E7525 (Tumwater) chipset and 6300ESB (Hance Rapids) Expansion Slots � One PCI-Expr
Resumen del contenido incluido en la página 13
Chapter 1: Introduction ACPI Features � Microsoft OnNow � Slow blinking LED for suspend state indicator � Main switch override mechanism Onboard I/O � Marvell SATA controller (*X6DAT-G only) � One Intel 8254x Gigabit Ethernet controller (supports 1 GLAN port) � 2 EIDE Ultra DMA/100 bus master interfaces � 1 floppy port interface (up to 2.88 MB) � 1 EPP/ECP Parallel Port � PS/2 mouse and PS/2 keyboard ports � Up to four USB 2.0 (Universal Serial Bus): (2 Back Panel USB ports & 2 Front Panel USB
Resumen del contenido incluido en la página 14
DAT A DAT A DAT A CTRL CTRL CTRL ADDR ADDR ADDR Introduction X6DAT-G/X6DAi-G User's Manual E64MT NOCONA PROCESSOR#1 E64MT VRM CL OCK NOCONA PROCESSOR#2 PCI EXP. A X8 1 PCI -EXP SLOT 4 DDR I 7525E DDR 266/333 J17 D I MMs MC H PCI EXP. B, C ( X16) 1 PCI -EXP DDR 266/333 SLOT 4 DDR I J15 D I MMs PCI 32 BI T PCI 32 BI T Gbi t LAN IDE UDMA/ 100 HUB SLOT SLOT 82541 PRI / SEC J19 J42 JLAN1 PCI BUS 32 BI T/33 MHz SATA SATA 6300ESB 0, 1 ICH PCI X BUS 64 BI T/66 MHz SATA HANCE RAPI DS AC 97 LPC BUS 1 P
Resumen del contenido incluido en la página 15
Chapter 1: Introduction 1-2 Chipset Overview Built upon the functionality and capabilities of the E7525 chipset, the X6DAT- G/X6DAi-G motherboard provides the performance and feature set required for dual processor-based computer systems, with configuration options optimized for communications, presentation, storage, computation and data- base applications. The Intel E7525 chipset consists of the following compo- nents: the Memory Controller Hub (MCH), and the I/O Controller Hub (6300 ESB ICH).
Resumen del contenido incluido en la página 16
Introduction X6DAT-G/X6DAi-G User's Manual 1-3 Special Features Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond when AC power is lost and then restored to the system. You can choose for the system to remain powered off (in which case you must hit the power switch to turn it back on) or for it to automatically return to a power- on state. See the Power Lost Control setting in the Advanced BIOS Setup section (Peripheral Device Configuration)
Resumen del contenido incluido en la página 17
Chapter 1: Introduction the CPU. The onboard chassis thermal circuitry can monitor the overall system temperature and alert users when the chassis temperature is too high. CPU Fan Auto-Off in Sleep Mode The CPU fan activates when the power is turned on. It continues to operate when the system enters Standby mode. When in sleep mode, the CPU will not run at full power, thereby generating less heat. CPU Overheat/Fan Fail LED and Control This feature is available when the user enables the CPU ov
Resumen del contenido incluido en la página 18
Introduction X6DAT-G/X6DAi-G User's Manual such as CD-ROMs, network cards, hard disk drives and printers. This also includes consumer devices connected to the PC such as VCRs, TVs, tele- phones and stereos. In addition to enabling operating system-directed power management, ACPI provides a generic system event mechanism for Plug and Play and an oper- ating system-independent interface for configuration control. ACPI lever- ages the Plug and Play BIOS data structures while providing a process
Resumen del contenido incluido en la página 19
Chapter 1: Introduction The SUPER X6DAT-G/X6DAi-G accommodates ATX power supplies. Al- though most power supplies generally meet the specifications required by the CPU, some are inadequate. You should use one that will supply at least 400W of power. A 12V 8-pin power connection (at J1D1) is required for CPU power consumption, and an additional 12V 4-pin power connection (J32) is also recommended for heavy load configura- tions.) Also your power supply must supply 1.5A for the Ethernet ports.
Resumen del contenido incluido en la página 20
Introduction X6DAT-G/X6DAi-G User's Manual 1-14
