Resumen del contenido incluido en la página 1
SY-5EHM/5EH5
V1.0/V1.1
™
7
Motherboard
Quick Start Guide
C
Quick BIOS Setup
The SOYO CD Installation Introduction
RECYCLED PAPER 100%
POST CONSUMER
FOR HOME OR OFFICE USE
With FCC Standards FC
Tested To Comply
Super
Resumen del contenido incluido en la página 2
“ ” “ ” Y “ ” Y 4 — Best regards, 8669-2A5LES2AC-00 98, EH-1A6,07/15/1998-VP3-586B- Copyright © 198 : Award Modular BIOS V4.51PG, An Energy Star Ally System BIOS : PC100 SDRAM DIMM 32MBx1 /1MB On Board Memory/L2 Cache : Intel Pentium 200/66Mhz CPU Model : N/A Hardware Revision : SY-5EHM/5EH5 System Model Name : SOYO COMPUTER INC. Company Name The ear 2000 certification test has been done under the following system configuration: seal. Certification NSTL :Year 2000 SY-5EHM/5EH5: system is eligib
Resumen del contenido incluido en la página 3
A T , y F 6 . , Taiwan, R.O.C Hsien Taipei Chih, Wu Rd., Sec. 1, His Hsin Tai , No. 106, SPORTON INTERNATIONAL INC. The test was carried out by , Taiwan, R.O.C. Hsien Taipei Chuang Cit Hsing Wu-Kung 5 Rd., No.21, SOYO COMPUTER INC. This declaration is given for the manufacturer Keyboard: SILITED/GYUM99SK Modem: ACEEX/IF AXDM1414 Printer: HP/DS17XU2225 Monitor: SONY/AK8GDM17SE2T The product was tested with the following configuration: that may cause undesired operation. interference, and (2)
Resumen del contenido incluido en la página 4
™ ™ 5EHM/5EH5 V1.x Super 7 Motherboard ® m * These specifications are subject to change without notice 4 5EHM/5EH5 V1.x Serial - Version 1.4 - Edition: August 1999 "http://www.soyo.com.tw". on the Internet. The address is Web Site If you need any further information, please visit our document is subject to change without notice. however, no guarantee is given as to the correctness of the contents. The information in this installing the Motherboard. Information in this guide has been carefully
Resumen del contenido incluido en la página 5
1 Introduction 1 Congratulations on your purchase of the 5EHM/5EH5 V1.x Super 7 ™ Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to 5EHM/5EH5 V1.x Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard. Unpacking When unpacking the Motherb
Resumen del contenido incluido en la página 6
SY-5EHM/5EH5 V1.x Motherboard Layout e B K 15 S r V 3 m SMC PRT 1 4 y FDC37C669Q 1 9 1 r 1 1 1 1 JP44 1 3 3 5 511 IR1 1 AGP Slot 3 PCI Slot #2 1 IDE 1 IDE 2 FDC 3 ISA Slot # ETEQ ETEQ 2 1 8 9 3 1 + r T _) 2 k 1 M M 1 ++ o + 23456 _ 3 1 D 2 K 2 + D __ 1 JP4 2 M 3 1 JP1 JP9 2 N O 13 ON * 0 24 0 1 . 12345 2 13 Key Features Ø 100MHz AGP Super 7 ™ platform Ø Supports Wake-On-LAN (WOL) Ø 512KB/1MByte L2 cache Ø Fan off in suspend mode Ø Supports CPU voltage from 2.0V to 3.5V Ø 3 x 32-bit bus ma
Resumen del contenido incluido en la página 7
2 Installation 2 To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket. Follow the directions in this section designed to
Resumen del contenido incluido en la página 8
Install the Motherboard Follow the steps below in order to perform the installation of your new 5EHM/5EH5 V1.x Super 7 ™ Motherboard. Install the CPU ® To mount the Pentium processor that you have purchased separately, follow these instructions. 1 2 3 4 1. Lift the socket handle up to a vertical position. 2. Align the blunt edge of the CPU with the matching pinhole distinctive edge on the socket. 3. Seat the processor in the socket completely and without forcing. 4. Then close the socket handle
Resumen del contenido incluido en la página 9
Set SW2 ,JP1 for CPU Voltage SW2 is used to set the CPU core voltage, JP1 is used to select the CPU voltage type single voltage or dual voltage. Please verify the correct voltage settings with your dealer before installation. Use the following table to set SW2, JP1 to the proper voltage value according to the specifications marked on your CPU: Voltage Setting: 1 2 3 4 5 1-2 3-4 on on on on off open open The AMD K5 and K6 come in several versions with different voltages. Please verify the correc
Resumen del contenido incluido en la página 10
Voltage Setting: 1 2 3 4 5 1-2 3-4 IDT X86 CPU C6/2-225* on on on on off open open IDT X86 CPU 2-266 The IDT X86 CPU C6/2 comes in several versions with different. Voltage. IDT X86 CPU 2-300 Please ask your dealer for the correct voltage. IDT X86 CPU C6/2-200* IDT X86 CPU 2-233* Rise mP6 PR266 off off off on off close close Set SW1 for CPU Frequency The DIP switch SW1 enables you to assign the Frequency Multiplier, CPU Host Bus Clock, AGP Clock and PCI Clock, as shown in the following table: Fr
Resumen del contenido incluido en la página 11
Frequency Setting: 1 2 3 4 5 6 P54C P100 P54C P133 P55C P233 This main board supports various CPU multiplier and host bus frequency settings. Please select the proper frequency setting based on specifications of the CPU you have purchased. System stability or components damage, in case of over-specification setting, is not guaranteed. Installation 11 on off off off off on 1-2 2-3 1-2 100MHz 2.0x Rise mP6 PR266 off off off off on off 1-2 2-3 2-3 66MHz 3x on off off off on on 1-2 2-
Resumen del contenido incluido en la página 12
Jumper JP7 is used to indicate the frequency of the CPU bus clock to the ETEQ chipset. Jumpers JP9 and JP10 are used to determine that the SDRAM is running at the frequency of the CPU bus clock or at that of the AGP clock. CPU BUS AGP BUS SDRAM PCI Clock JP7 JP9 JP10 Clock Clock Clock Select the CPU Burst Mode There are two types of CPU burst modes according to manufacturer design: Ø Interleave Burst (CPU: Intel P54C/P55C, AMD K5/K6/K6-2/K6-III,IDT X86 CPU, Rise mP6) Ø Linear Burst (CPU: Cyrix
Resumen del contenido incluido en la página 13
Attach Connectors This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new 5EHM/5EH5 V1.x Super 7 ™ Motherboard, please refer to 5EHM/5EH5 V1.x Motherboar
Resumen del contenido incluido en la página 14
Configure Memory Your board comes with one SIMM Bank (2 modules) and two DIMM sockets, providing support for up to 512MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or faster DIMM modules; for 83MHz host bus CPUs use 8ns modules. Clear CMOS Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap. 1 1 2 2 3 3 14 Installation pe
Resumen del contenido incluido en la página 15
3 Quick BIOS Setup 3 After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the quick BIOS setup. Select [LOAD SETUP DEFAULT] Select the “ LOAD SETUP DEFAULT ” menu and type “ Y ” at the prompt to load the BIOS optimal setup. Select [STANDARD CMOS SETUP] Set [Date/Time] and [Floppy drive type], th
Resumen del contenido incluido en la página 16
4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-5EHM/5EH5 V1.x Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Me
Resumen del contenido incluido en la página 17
Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. SOYO CD Manuals Please select your manual in the box below and click OK. 686 boards: 586 boards: 5EH V1. 0 O K Back (Manual Selection Menu) The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PD
Resumen del contenido incluido en la página 18
Ø After installation of windows, you will need to install the ETEQ drivers. Follow the instruction below. Click the Enter SOYO CD button to display the list of drivers that can be installed on your Motherboard. The start-up program displays the drivers available for the 5EHM/5EH5 V1.x and the Windows version you use. Click the Install drivers button to display the list of drivers that can be installed on your Motherboard. The start-up program displays the drivers available for the 5EHM/5EH5 V1.x
Resumen del contenido incluido en la página 19
─ AGP VxD Driver This driver must be installed in order to be able to make use of the on-board AGP Video functionality. ─ ETEQ Chipset Functions Registry This driver will make the necessary changes to the Windows registry, in order to make sure that Windows has no problems recognizing your ETEQ chipset. ─ IRQ remapping utility (This driver is installed automatically) This utility will remap the IRQ lines to make sure that everything functions properly under Windows. Select which driver you want
Resumen del contenido incluido en la página 20
Note: If no HTML browser is installed on your system, the Start Up program will prompt you on whether or not you would like to install the Internet Explorer* browser. Click YES to install the HTML browser. After the installation is complete, please restart your system. Then re-run the SOYO CD and you will be able to browse the SOYO HTML database. (* Internet Explorer is a Microsoft Trademark) 20 The SOYO CD Quick Start Guide SY-5EHM/5EH5 V1.x
