Resumen del contenido incluido en la página 1
SY-7IZB+N
Motherboard
Quick Start Guide
Tested To Comply
C
With FCC Standards
FC
FOR HOME OR OFFICE USE
POST CONSUMER
100% RECYCLED PAPER
The SOYO CD Quick BIOS Hardware Introduction
Setup Installation
Resumen del contenido incluido en la página 2
SOYO™ SY-7IZB+N Motherboard TM Celeron processor 82440 ZX AGP/PCI Motherboard 66 & 100MHz Front Side Bus supported Baby AT Form Factor Copyright © 2001 by Soyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentioned in this publication are used for identification purposes only and may be registered trademarks or copyrights of their respective companies. C
Resumen del contenido incluido en la página 3
SY-7IZB+N Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-7IZB+N Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-7IZB+N Motherboard User's Manual and Technical Reference online manual included on the CD-ROM packed with your Motherboard. Unpacking Wh
Resumen del contenido incluido en la página 4
DIMM 3 DIMM 2 DIMM 1 * SY-7IZB+N Quick Start Guide SY-7IZB+N Motherboard Layout USB1 PS/2 Mouse Connector KB 2 1 JP10 Connector Flash BIOS Winbond 13 10 83977 ATX Power AT Power 1 COM 1 COM 2 JP44 1 1 1 5 1 3 PRT 1 IR1 1 FDC 1 1 AGP Slot PCI Slot #4 PCI Slot #2 2 2 PCI Slot #3 PCI Slot #1 ISA Slot #3 ISA Slot #1 IDE 1 IDE 2 TM Intel SB-LINK ISA Slot #2 371EB (PC-PCI) CHAFAN 1 Socket 370 Intel 82440ZX Power RST Hardware LED Monitoring Keylock PWR ACPI + + LED
Resumen del contenido incluido en la página 5
SY-7IZB+N Quick Start Guide 2 Installation 2 To avoid damage to your Motherboard, follow these simple rules while handling this equipment: Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold it by the edges and avoid touching its components. Check the Motherboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket. Follow th
Resumen del contenido incluido en la página 6
SY-7IZB+N Quick Start Guide Install the Motherboard Follow the steps below in order to perform the installation of your new SY-7IZB+N Motherboard. Step 1. Install the CPU Mark your CPU Frequency: Record the working frequency of your CPU that should be clearly marked on the CPU cover. 300MHz (66 x 4.5) 333MHz (66 x 5.0) 366MHz (66 x 5.5) 400MHz (66 x 6.0) 433MHz (66 x 6.5) 466MHz (66 x 7.0) 500MHz (66 x 7.5) 533MHz (66 x 8.0) This Motherboard is designed to be able to support processors
Resumen del contenido incluido en la página 7
SY-7IZB+N Quick Start Guide Step 2. Make Connections to the Motherboard This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on how to connect internal and external peripherals to your new SY-7IZB+
Resumen del contenido incluido en la página 8
SY-7IZB+N Quick Start Guide Step 3. Configure Memory Your board comes with three DIMM sockets, providing support for up to 256MB of main memory using DIMM modules from 8MB to 128MB. Memory Configuration Table Number of DIMM 1 DIMM 2 DIMM 3 Memory Modules 1 Double-sided/Single-sided Double-sided 2 Double-sided/Single-sided Double-sided 3 Double-sided/Single-sided Single-sided Single-sided RAM Type SDRAM Memory Module Size (MB) 8/16/32/64/128 Mbytes Note: Because DIMM banks 2 and 3 ar
Resumen del contenido incluido en la página 9
SY-7IZB+N Quick Start Guide Step 6. Enable/Disable the Keyboard Power-On (JP10) You can choose to enable the Wake-Up by Keyboard or Mouse function by shorting pin 1-2 on jumper JP1, otherwise, short pin 2-3 to disable this function. Support Power-On Enable Disable by Keyboard Enable Disable Power-On JP10 Setting Power-On by by Keyboard 2 Keyboard 2 function 1 3 1 3 function (short pin 2-3) (short pin 1-2) Important: 1. When using the Keyboard Power-On function, please make sure
Resumen del contenido incluido en la página 10
SY-7IZB+N Quick Start Guide Note on Over-clocking Capability The SY-7IZB+N Motherboard provides over-clocking capability. Due to the over-clocking setting your system may fail to boot up or hang during run time. If this occurs, please perform the following steps to recover your system from the abnormal situation: 1. Turn off system power. (If you use an ATX power supply, and depending on your system, you may have to press the power button for more than 4 seconds to shut down the system.)
Resumen del contenido incluido en la página 11
SY-7IZB+N Quick Start Guide 3 Quick BIOS Setup 3 This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The [SOYO COMBO SETUP] menu combines the main CPU parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the A
Resumen del contenido incluido en la página 12
SY-7IZB+N Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 2000 or NT. Your SY-7IZB+N Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive The SOYO CD
Resumen del contenido incluido en la página 13
SY-7IZB+N Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Foll
Resumen del contenido incluido en la página 14
SY-7IZB+N Quick Start Guide driver revision: Intel .inf utility for Win 95 Intel Bus Master Drivers for Win 95 Intel BusMaster Drivers for Win NT Intel BusMaster Drivers for OS/2 Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Intel Southbridge Drivers Because Windows 95 does not recognize the Southbridge of the newer Intel chipsets (TX, BX, ZX etc) this utility has to be run, it will update the necessary Windows files. (Only for Windows 95)
Resumen del contenido incluido en la página 15
SY-7IZB+N Quick Start Guide Quick Trouble shoot tips Video (no display) related issues I built a new computer system using a Soyo board and nothing happens when turning it on, no video and no beeps from the PC speaker. What is happening and how can it be fixed? No screen and no beeps mean that your CPU and motherboard do not work at all. It could be that the CPU is not seated correctly or that a component on the M/B is grounded (shorted) with the case. Also make sure to check the voltag
Resumen del contenido incluido en la página 16
SY-7IZB+N Quick Start Guide I get distorted video my AGP card right after I save my bios. Why is that? The cause is likely that your AGP card is not running at the correct bus speed. To fix this, please clear the CMOS via JP5 and if it still does not work, please upgrade your motherboard bios to the latest version. BIOS Issues Where can I find the BIOS revision of my mainboard? It will be displayed on the up-left corner on the screen during boot-up. It will show as your board type follo
Resumen del contenido incluido en la página 17
SY-7IZB+N Quick Start Guide In Device Manager, I keep getting yellow exclamation signs on my sound port even though I have installed my sound driver several times and I could not get my sound card to work. What is wrong? It is likely that you did not have the correct driver installed. If you are sure that the correct sound driver has been installed, then please install the 'south bridge' driver for the motherboard. The sound is working in my system, but when I play CD music from the CD-
Resumen del contenido incluido en la página 18
SY-7IZB+N Quick Start Guide How to contact us: If you are interested in our products, please contact the SOYO sales department in the region you live. If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. TAIWAN JAPAN SOYO COMPUTER INC. SOYO COMPUTER No. 21 Wu-Kung 5 Rd., Hsin Chuang SOYO BLDG, 1-23-14, Hyakunincho, City, Taipe
Resumen del contenido incluido en la página 19
SY-7IZB+N Quick Start Guide Hong Kong Soyo (H.K.) Ltd. 5C, Big Star Centre, 8 Wang Kwong Road, Kowloon Bay, Kowloon, HK TEL: 852-2710-9810 FAX: 852-2710-9078 http://www.soyo.com.hk/ Email: soyo@hkstar.com 19
Resumen del contenido incluido en la página 20
Edition: June 2001 Version 1.2 SY-7IZB+N SERIAL
