Resumen del contenido incluido en la página 1
Product Manual
Pipeline HD.2 Series SATA
ST31000424CS ST31000322CS
ST3500414CS ST3500312CS
ST3320413CS ST3320310CS
ST3250412CS ST3250312CS
ST3160316CS
100529372
Rev. E
October 2009
Resumen del contenido incluido en la página 2
Revision history Revision Date Sheets affected or comments Rev. A 01/07/09 Initial release. Rev. B 04/29/09 1, 6, 17, 22, 24, 32 and 34. Rev. C 05/19/09 fc, 1, 3, 8, 10-11, 19 and 32. Rev. D 07/08/09 1, 5, 7, 9, 25 and 27-28. Rev. E 10/29/09 Updated weight information in Tables 1-3 and physical specifications. Fixed Write DMA FUA Extended command. Minor text and formatting changes throughout. Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100
Resumen del contenido incluido en la página 3
Pipeline HD.2 Series SATA Product Manual, Rev. E i
Resumen del contenido incluido en la página 4
ii Pipeline HD.2 Series SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 5
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 6
iv Pipeline HD.2 Series SATA Product Manual, Rev. E
Resumen del contenido incluido en la página 7
List of Figures Figure 1. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Figure 3. Mounting dimensions (for 1000GB models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Figure 4. Mounting dimensions (for 500, 320, 250 and 160GB models) . . . . . .
Resumen del contenido incluido en la página 8
Resumen del contenido incluido en la página 9
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate TM Pipeline HD .2 Series model drive: ST31000424CS ST3500414CS ST3320413CS ST3250412CS ST31000322CS ST3500312CS ST3320310CS ST3250312CS ST3160316CS These drives provide the following key features: • High instantaneous (burst) data-transfer rates 3Gb/s default. Limit settings to 1.5Gb/s available via SMART Command Transport command. • Perpendicular recording, Tunneling Magnet
Resumen del contenido incluido en la página 10
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: • Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. • Thinner and more flexible cabling for improved enclosure airflow and ease of installation. • Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Resumen del contenido incluido en la página 11
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive model: ST31000424CS ST3500414CS ST3320413CS ST3250412CS ST31000322CS ST3500312CS ST3320310CS ST3250312CS ST3160316CS 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on spec
Resumen del contenido incluido en la página 12
Table 1: Drive specifications summary for 1000GB models Drive specification ST31000424CS ST31000322CS Formatted Capacity 1000GB (512 bytes/sector)* Guaranteed sectors 1,953,525,168 Heads 4 Disks 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg.) 236 ktracks/in 2 Areal density (avg.) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate (max.) 1285Mb/s Sustained data transfer rat
Resumen del contenido incluido en la página 13
Drive specification ST31000424CS ST31000322CS Operational Shock (max.) 70 Gs at 2ms (read) 30 Gs at 2ms (write) Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to350Hz: 5.0 Gs 350Hz to 500Hz: 1.0 Gs Drive acoustics, sound power Idle** 2.1 bels (typical) 2.3 bels (max.) CE Seek Profile 2.4 bels (typical) 2.5 bels (max.) 15 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate
Resumen del contenido incluido en la página 14
Table 2: Drive specifications summary for 500 and 320GB models Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320310CS Formatted capacity 500GB 320GB (512 bytes/sector)* Guaranteed sectors 976,773,168 625,142,448 Heads 2 Disks 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg) 236 ktracks/in 2 Areal density(avg) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate
Resumen del contenido incluido en la página 15
Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320310CS Operational Shock (max.) 70 Gs at 2ms Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to 350 Hz: 5.0 Gs 350Hz to 500Hz: 1.0 Gs Drive acoustics, sound power Idle** 1.9 bels (typical) 2.1 bels (max.) CE Seek Profile 2.3 bels (typical) 2.4 bels (max.) 15 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AF
Resumen del contenido incluido en la página 16
Table 3: Drive specifications summary for 250 and 160GB models Drive specification ST3250412CS ST3250312CS ST3160316CS Formatted capacity 250GB 160GB (512 bytes/sector)* Guaranteed sectors 488,397,168 312,581,808 Heads 1 Disks 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density (max.) 1417kb/in Track density (avg.) 236 ktracks/in 2 Areal density (avg.) 341.5Gb/in Spindle speed 5900 RPM Internal data transfer rate (max.) 1
Resumen del contenido incluido en la página 17
Drive specification ST3250412CS ST3250312CS ST3160316CS Operational Shock (max.) 70 Gs at 2ms (read) 30 Gs at 2ms (write) Non-Operational Shock (max.) 350 Gs at 2ms Vibration, operating 5Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Vibration, non-operating 5Hz to 350Hz: 5.0 Gs 350Hz to 500Hz: 1.0 Gs Drive acoustics, sound power Idle** 1.9 bels (typical) 2.1 bels (max.) CE Seek Profile 2.3 bels (typical) 2.4 bels (max.) 15 Nonrecoverable read errors 1 per 10 bits read Annualized
Resumen del contenido incluido en la página 18
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST31000424CS 1000GB 1,953,525,168 ST31000322CS ST3500414CS 500GB 976,773,168 ST3500312CS ST3320413CS 320GB 625,142,448 512 ST3320310CS ST3250412CS 250GB 488,397,168 ST3250312CS ST3160316CS 160GB 312,581,808 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the driv
Resumen del contenido incluido en la página 19
2.5 Physical characteristics 1000GB model 500, 320, 250 and 160GB models Maximum height 26.1mm / 1.028 in 20.20mm / 0.794 in Maximum width 101.85mm / 4.010 in Maximum length 146.99mm / 5.787 in Typical weight 615g / 1.356 lb 500 and 320GB models 420g / 0.926 lb 250 and 160GB models 395g / 0.871 lb Cache buffer ST31000424CS, ST3500414CS, ST3320413CS and 16MB (16,384KB) ST3250412CS ST31000322CS, ST3500312CS, 8MB (8,192KB) ST3320311CSST3250312CS and ST3160316CS 2.6 Seek time Seek measurements a
Resumen del contenido incluido en la página 20
2.8 Power specifications The drive receives DC power (5V or 12V) through a native SATA power connector. Refer to Figure 2 on page 22. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5V and 12V input voltage at 25°C ambient tem- perature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches opera
