Manual de instrucciones de Renesas R8C/25

Resumen del contenido incluido en la página 1

Renesas Starter Kit for R8C/25
QuickStart



LCD module


Applicatio n Board Inte rface

Reset switch E8 header




LCD module
connector





User LEDs
E8a debugger module
LIN connector
Application Board Interface
Analogue adjust
User switches
D007074_11_S01_V04

Resumen del contenido incluido en la página 2

1. Installation Do not connect the E8a module until the software support has been installed. 1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the RSK directory from the CD root folder and double click on ‘setup.exe’. 2. The installer will ask you which language is to be used, please choose the appropriate one. 3. On the first screen of the installer proper, click . 4. The Licen

Resumen del contenido incluido en la página 3

3. High-performance Embedded Workshop Workspace High-performance Embedded Workshop integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on how to user High-performance Embedded Workshop, open the High-performance Embedded Workshop manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator). 17. Launch High-performance Embedded Workshop from the Sta

Resumen del contenido incluido en la página 4

31. Set the firmware location to “User Flash Area”. Clear the “Enable advanced setting” checkbox. 32. Click . 33. The “Communication Baud Rate” options will be shown. Leave the default options as shown. 34. Click . Note: The first time the E8a is connected, you may be asked to choose a driver, select “Renesas Communications”, after a few seconds the “Interface” and “Channel” numbers will be automatically displayed, click

Resumen del contenido incluido en la página 5

The code will stop and the source code will be opened at the current program counter. 5. Next Step After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas Development Tools. The Hardware manual supplied with this Renesas Starter Kit