Manual de instrucciones de Renesas M37630T-RFS

Resumen del contenido incluido en la página 1

M37630T-RFS
Converter Board for M37630 Emulator MCU
User's Manual
Keep safety first in your circuit designs!
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property
damage. Remember to give due consideration to safety when making your circuit designs, with appr

Resumen del contenido incluido en la página 2

* TQSOCKET and TQPACK are trademarks of Tokyo Eletech Corporation. Keep safety first in your circuit designs! • Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with app

Resumen del contenido incluido en la página 3

Contents 1. Precautions for Safety.................................................................................................................... 4 1.1 Safety Symbols and Meanings ......................................................................................... 4 2. Things to Check When Unpacking................................................................................................ 6 3. Introduction ...........................................................................

Resumen del contenido incluido en la página 4

1. Precautions for Safety In both the user's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. 1.1 Safety Symbols and Meanings If the requirements shown in the "WARNING" sentences are ignored, the equ

Resumen del contenido incluido en la página 5

CAUTION Cautions to Be Taken for Handling This Product: • Do not disassemble or modify this product. Disassembling or modifying this product can cause damage. • Use caution when handling the main unit. Be careful not to apply a mechanical shock. • Pins of the TQPACK may be broken even by a slight shock because they are very thin (0.25 mm). Therefore, be careful when handling the TQPACK. Also be sure to connect the TQPACK and to solder the TQPACK onto a user's board in the right direction. • Conn

Resumen del contenido incluido en la página 6

2. Things to Check When Unpacking The M37630T-RFS consists of the following parts and the board. When unpacking, check to see if your M37630T-RFS package contains all of these items. Contents M37630T-RFS x1 PCA4628 x1 PCA4628B x1 TQSOCKET044SAG x1 TQPACK044SA x1 M37630E4FS x1 M37630T-RFS User's Manual (this manual) x1 When shipped from the factory: •The PCA4628B is already connected to the M37630T-RFS. • The TQSOCKET044SAF is already connected to the PCA4628B. 3. Introduction The M37630T-RFS is

Resumen del contenido incluido en la página 7

4. Pin Assignments Table 4.1 shows pin assignments of the M37630T-RFS. Table 4.1 Pin assignments of the M37630T-RFS TQPACK Signal J3 Connector TQPACK Signal J3 Connector TQPACK Signal J3 Connector TQPACK Signal J3 Connector 1 P31 19 12 P47 43 23 P03 27 34 P17 9 2 P32 20 13 RESET 42 24 P04 26 35 P20 10 3 P33 21 14 Vss 38-41 25 P05 25 36 P21 11 4 P34 22 15 Xin 37 26 P06 1 37 P22 12 5 P40 23 16 Xout 36 27 P07 2 38 P23 13 6 P41 24 17 Vcc 33-35 28 P11 3 39 Vss 38-41 7 P42 48 18 AVss 32 29 P12 4 40 P2

Resumen del contenido incluido en la página 8

6. Setup (1) Connect the M37630T-RFS or the PCA4628 to the PCA4628B. (2) Connect the boards combined in the procedure (1) to the TQSOCKET044SAG. (3) Connect the products combined in the procedure (2) to the TQPACK044SA soldered onto the user's board. Figure 6.1 Setting up the products ( 8 / 8 )