Resumen del contenido incluido en la página 1
REJ10J1320-0100
H8/36109 Group Expansion I/O Board
HS36109EIO61H User’s Manual
Renesas Microcomputer Development Environment System
H8 Family / H8/300H Tiny Series
HS36109EIO61HE
Rev.1.00
Revision Date: Apr. 06, 2006
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammabl
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. � KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. Emulator Product: Throughout this document, the term "emulator product" shall be defined as the following products produced only by Renesas Technology Corp. excluding all subsidiary products. • E6000 emulator station • Expansion I/O board • User system
Resumen del contenido incluido en la página 6
LIMITED WARRANTY Renesas warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Renesas, at its option, will repair or replace any emulator products returned intact to the factory, transportation charges prepaid, which Renesas, upon inspection, determine to be defective in material and/or workmanship. The foregoing shall constitute the sole remedy for any breach of Renesas’ warranty
Resumen del contenido incluido en la página 7
State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. The Warranty is Void in the Following Cases: Renesas shall have no liability or legal responsibility for any problems caused by misuse, abuse, misapplication, neglect, imp
Resumen del contenido incluido en la página 8
SAFETY PAGE READ FIRST � READ this user's manual before using this emulator product. � KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. DEFINITION OF SIGNAL WORDS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situat
Resumen del contenido incluido en la página 9
WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance. 2. Always switch OFF the E6000 emulator and user system before connecting or disconnecting any CABLES or PARTS. 3. Always before c
Resumen del contenido incluido en la página 10
Preface Thank you for purchasing this H8/36109 group expansion I/O board (HS36109EIO61H; hereinafter referred to as the expansion I/O board) for the E6000 emulator. The expansion I/O board enables user systems for Renesas’ original microcomputer H8/36109 group to be developed using an H8/36109 group E6000 emulator (HS3664EPI61H or HS3664EPI62H; hereinafter referred to as the emulator). i
Resumen del contenido incluido en la página 11
Contents Section 1 Overview ...........................................................................................1 1.1 Environment Conditions................................................................................................... 1 1.2 Supported MCUs and User System Interface Cable ......................................................... 1 1.3 Operating Voltage and Frequency Specifications............................................................. 2 1.4 Components ....
Resumen del contenido incluido en la página 12
Section 1 Overview The H8/36109 group E6000 expansion I/O board (hereinafter referred to as the expansion I/O board) is an efficient software and hardware development support tool for application systems using timer RC, timer RD, SCI3, and AD converter (ports D to H are shared), which are dedicated additional functions of the Renesas’ original microcomputer H8/36109 group. The expansion I/O board should be used with H8/3664 series E6000 emulator station (HS3664EPI61H or HS3664EPI62H; her
Resumen del contenido incluido en la página 13
1.3 Operating Voltage and Frequency Specifications Table 3 shows the MCU operating voltage and frequency specifications supported by the emulator. If the emulator is used in an environment that exceeds the operating voltage range and operating frequency range guaranteed for the MCU operation, normal emulator operation is not guaranteed. Table 3 Operating Voltage and Frequency Specifications MCU Type Operating Voltage (V) Operating Frequency Range ( φ) (MHz) H8/36109 group 3.0 to 5.5 4 to
Resumen del contenido incluido en la página 14
E6000 EMULATOR 1.4 Components Figure 1.1 shows the HS36109EIO61H expansion I/O board appearance, and table 4 lists the components of the expansion I/O board. Please make sure you have all of these components when unpacking. Figure 1.1 HS36109EIO61H Expansion I/O Board Table 4 HS36109EIO61H Components No. Component Quantity Remarks 1 HS36109EIO61H 1 Expansion I/O board 2 Documentation 1 User’s manual for HS36109EIO61H (this manual) 3 USER INTERFACE CABLE E6000
Resumen del contenido incluido en la página 15
4
Resumen del contenido incluido en la página 16
Section 2 Connection Procedures WARNING Always switch OFF the user system and the emulator product before the EXPANSION I/O BOARD or USER SYSTEM INTERFACE CABLE is connected to or removed from any part. Before connecting, make sure that pin 1 on each side is correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage the user system, the emulator product, the user system interface cable, and the expansion I/O board, or will result in PERSONAL
Resumen del contenido incluido en la página 17
2.2 Using Emulator with Connecting User System through User System Interface Cable CAUTION When connecting or removing the user system interface cable, apply force only in the direction suitable for connection or removal, while making sure not to bend or twist the cable or connectors. Otherwise, the cables or connectors will be damaged. 1. Make sure that the emulator and the user system are turned off. 2. [1] After making sure the direction of the expansion I/O board connector
Resumen del contenido incluido en la página 18
E6000 EMULATOR Emulator station [1] Expansion I/O board [2] Cable body connector CTS screws (M3 x 6 mm) User system interface cable Figure 2.1 Connecting Expansion I/O Board to Emulator Station and User System Interface Cable 7 USER INTERFACE CABLE E6000 E6000
Resumen del contenido incluido en la página 19
8
Resumen del contenido incluido en la página 20
Section 3 User System Interface Circuit Switches, protection circuits, and termination circuits are provided for this expansion I/O board and used to connect signals to the user system interface cable. Figure 3.1 shows the user system interface signal circuit. E6000 (HS3664EPI61H or HS3664EPI62H) HS36109EIO61H Vcc 47 kΩ H8/3664 H8/36109 Evaluation chip 47 Ω User system interface cable Ports D, E, F, G, and H Figure 3.1 User System Interface Signal Circuit (Ports D, E, F, G, and H) 9
