Resumen del contenido incluido en la página 1
User’s Manual
IE-703079-MC-EM1
In-circuit Emulator Option Board
Target device
V850/SF1™
Document No. U15447EJ1V0UM00 (1st edition)
Date Published September 2001 N CP(K)
© 2001 1991
Printed in Japan
Resumen del contenido incluido en la página 2
[MEMO] User’s Manual U15447EJ1V0UM 2
Resumen del contenido incluido en la página 3
V850 Family and V850/SF1 are trademarks of NEC Corporation. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. PC/AT is a trademark of International Business Machines Corporation. Ethernet is a trademark of Xerox Corporation. • The information in this document is current as of May, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or da
Resumen del contenido incluido en la página 4
Regional Information Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: • Device availability • Ordering information • Product release schedule • Availability of related technical literature • Development environment specifications (for example, specifications for third-party tools a
Resumen del contenido incluido en la página 5
INTRODUCTION Target Readers This manual is intended for users who design and develop application systems using the V850/SF1™. Purpose The purpose of this manual is to describe the proper operation of the IE-703079-MC- EM1 and its basic specifications. Organization This manual is divided into the following parts. Overview Names and functions of components Cautions How to Read This Manual It is assumed that the reader of this manual has general knowledge in the fields of electrical engineerin
Resumen del contenido incluido en la página 6
Related Documents When using this manual, refer to the following manuals. The related documents indicated in this publication may include preliminary versions. However, preliminary versions are not marked as such. Documents related to development tools (user’s manuals) Document Name Document Number IE-703002-MC In-circuit emulator U11595E IE-703079-MC-EM1 In-circuit emulator option board U15447E CA850 C Compiler package Ver. 2.40 Operation U15024E or later C Language U15025E Project Manager U15
Resumen del contenido incluido en la página 7
CONTENTS CHAPTER 1 OVERVIEW.........................................................................................................................10 1.1 Hardware Configuration............................................................................................................................... 10 1.2 Features (When Connected to IE-703002-MC) ........................................................................................... 11 1.3 Function Specifications (When Connected to
Resumen del contenido incluido en la página 8
LIST OF FIGURES Figure No. Title Page 1-1 System Configuration ........................................................................................................................................12 1-2 Contents in Carton.............................................................................................................................................13 1-3 Accessories .................................................................................................................
Resumen del contenido incluido en la página 9
LIST OF TABLES Table No. Title Page 2-1 Main System Clock Setting................................................................................................................................20 2-2 Subsystem Clock Setting...................................................................................................................................21 2-3 JP1 Setting in IE-703002-MC ............................................................................................................
Resumen del contenido incluido en la página 10
CHAPTER 1 OVERVIEW The IE-703079-MC-EM1 is an option board for the IE-703002-MC in-circuit emulator. By connecting the IE- 703079-MC-EM1 and IE-703002-MC, hardware and software can be debugged efficiently in system development using the V850/SF1. In this manual, the basic setup procedure and switch settings of the IE-703002-MC when connecting the IE- 703079-MC-EM1 are described. For the names and functions of the parts of the IE-703002-MC, and for the connection of elements, refer to the I
Resumen del contenido incluido en la página 11
CHAPTER 1 OVERVIEW 1.2 Features (When Connected to IE-703002-MC) Maximum operating frequency: 16 MHz (at 5.0 V operation) Extremely lightweight and compact Higher equivalence with target device can be achieved by omitting buffer between signal cables. The following pins can be masked. RESET, NMI, WAIT, HLDRQ Two methods of connection to target system: Pod tip direct connection (For information on the pod, refer to the IE-703002-MC User’s Manual (U11595E)) Attach an extension probe (s
Resumen del contenido incluido en la página 12
CHAPTER 1 OVERVIEW 1.4 System Configuration The system configuration when connecting the IE-703002-MC to the IE-703079-MC-EM1 and a personal computer (PC-9800 series or PC/AT (or compatibles)) is shown below. Figure 1-1. System Configuration <13> <5> <6> <7> [Magnified drawing: example of use of connector for target connection] <12> <14> <8> <4> <10> Target system <11> <9> <3> <10> <11> <1>, <2> Target system Remark <1> Personal computer (PC-9800 series or PC/AT or compatibles) <2> Debugger
Resumen del contenido incluido en la página 13
CHAPTER 1 OVERVIEW 1.5 Contents in Carton The carton of the IE-703079-MC-EM1 contains a main unit, guarantee card, packing list, and accessory bag. Make sure that the accessory bag contains this manual and the connector accessories. If there are missing or damaged items, please contact an NEC sales representative or an NEC distributor. Figure 1-2. Contents in Carton <1> IE-703079-MC-EM1 <4> Packing list <3> Guarantee card <2> Accessory bag <1> IE-703079-MC-EM1 × 1 <2> Accessory bag × 1 <3>
Resumen del contenido incluido en la página 14
CHAPTER 1 OVERVIEW Check that the accessory bag contains this manual, an accessory list (× 1), and the following accessories. (a) Spacers × 4 (b) Screws/washers × 4 sets (including screws and washer × 4) Figure 1-3. Accessories (a) Spacers (b) Screws/washers 14 User’s Manual U15447EJ1V0UM
Resumen del contenido incluido en la página 15
CHAPTER 1 OVERVIEW 1.6 Connection Between IE-703002-MC and IE-703079-MC-EM1 The procedure for connecting the IE-703002-MC and IE-703079-MC-EM1 is described below. Caution Connect carefully so as not to break or bend connector pins. <1> Remove the pod cover (upper and lower) of the IE-703002-MC. <2> Set the PGA socket lever of the IE-703079-MC-EM1 to the OPEN position as shown in Figure 1-4 (b). <3> Connect the IE-703079-MC-EM1 to the PGA socket at the back of the IE-703002-MC pod (refer to Fi
Resumen del contenido incluido en la página 16
CHAPTER 1 OVERVIEW Figure 1-4. Connection Between IE-703002-MC and IE-703079-MC-EM1 (1/2) (a) Overview Screw Upper cover Washer IE-703079-MC-EM1 Nylon rivets IE-703002-MC Spacer (b) PGA socket lever of IE-703079-MC-EM1 CLOSE OPEN 16 User’s Manual U15447EJ1V0UM
Resumen del contenido incluido en la página 17
CHAPTER 1 OVERVIEW Figure 1-4. Connection Between IE-703002-MC and IE-703079-MC-EM1 (2/2) (c) Connecting part (IE-703079-MC-EM1) Pin A1 position : Insertion guide : IE-703002-MC insertion area 17 User’s Manual U15447EJ1V0UM
Resumen del contenido incluido en la página 18
JP3 JP1 CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS This chapter describes the names, functions, and switch settings of components in the IE-703079-MC-EM1. For the details of the pod, jumper, and switch positions, etc., refer to the IE-703002-MC User’s Manual (U11595E). 2.1 Component Names and Functions of IE-703079-MC-EM1 Figure 2-1. IE-703079-MC-EM1 (a) Top view (b) Bottom view Direction of pin 1 of connector for target connection Direction of pin 1 of connector for target connection Co
Resumen del contenido incluido en la página 19
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS (1) TEST pins (CP1, CP2, CP13, CP15) These are pins used for testing the analog signals of the standalone emulator. • CP1: GND • CP2: GND • CP13: GND • CP15: GND (2) JP1 This is a pin board for supplying the main system clock. (3) JP2 This is the switch jumper for the main system clock supply source. Use and retain the factory settings (pins 1 and 2 shorted). (4) JP3 This is a pin board for supplying the subsystem clock (for details, refer to
Resumen del contenido incluido en la página 20
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS 2.2 Clock Settings This section describes the clock settings. For the position of the JP1 and JP2 in the IE-703079-MC-EM1, refer to Figure 2-1. For the jumper switch position in the IE-703002-MC, refer to the IE-703002-MC User’s Manual (U11595E). 2.2.1 Main system clock setting Table 2-1. Main System Clock Setting Emulator Use Clock Supply IE-703079-MC-EM1 Setting IE-703002-MC Setting Environment Method JP1 JP2 SW1 SW2 JP2 When using Internal cloc
