Resumen del contenido incluido en la página 1
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix
Intel 945P / ICH7
FSB1066
IL9 Pro
Dual DDR2 667
PCI Express
Motherboard
Socket 775
Gigabit LAN
4x SATA 3Gb/s
Intel Core 2 Duo, Pentium D,
7.1 Channel HD Audio
Pentium 4, Celeron D
Resumen del contenido incluido en la página 2
IL9 Pro User’s Manual English + Multilingual QIG st 1 Edition, October 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this do
Resumen del contenido incluido en la página 3
Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specifications ..............................................................................1-1 1.2 Motherboard Layout.....................................................................1-2 1.3 Choosing a Computer Chassis.......................................................1-3 1.4 Installing Motherboard............
Resumen del contenido incluido en la página 4
iv iv IL9 Pro IL9 Pro
Resumen del contenido incluido en la página 5
Hardware Setup 1. Hardware Setup 1.1 Specifications 3x PCI CPU Support Intel Core 2 Duo, Pentium D, Internal I/O Connectors Pentium 4, Celeron D Processor with 1x Floppy port 1066MHz FSB 1x ATA 100 IDE connector Supports Intel Hyper-Threading 4x SATA 3Gb/s connectors Technology 2x USB 2.0 headers Chipset 1x FP-Audio header Intel 945P / ICH7 1x CD-In connector Memory Rear Panel I/O 4x 240-pin DIMM slots support 1x PS/2 Keyboard connector maximum m
Resumen del contenido incluido en la página 6
1.2 Motherboard Layout 1-2 IL9 Pro
Resumen del contenido incluido en la página 7
Hardware Setup 1.3 Choosing a Computer Chassis Choose a chassis big enough to install this motherboard. As some features for this motherboard are implemented by cabling connectors on the motherboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required. If there is possibility of adopting some more hard drives, make sure your chassis has sufficient power and space for them. Most chassis have alternatives for I/O shield
Resumen del contenido incluido en la página 8
1.5 Checking Jumper Settings For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will SHORT OPEN OPEN leave it at OPEN position. For 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in. Pin 1~2 SHORT Pin 2~3 SHORT 1.5.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes cor
Resumen del contenido incluido en la página 9
Hardware Setup CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED” or “CMOS checksum error” displays on monitor, this backup battery is no longer functional and has to be renewed. To renew the backup battery: 1. Power off the system and disconnect with AC p
Resumen del contenido incluido en la página 10
1.6 Connecting Chassis Components 1.6.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connected to this 24-pin connector. Connect from pin-1 for either type. However, a 20-pin power supply may cause the system unstable or eve
Resumen del contenido incluido en la página 11
Hardware Setup 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention when connecting these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.
Resumen del contenido incluido en la página 12
1.6.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CPUFAN1: CPU Fan Power Connector SYSFAN2~3: System Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 1.6.4 Chassis Speaker Connector This header provides the connection to chassis speaker. 1-8 IL9 Pro
Resumen del contenido incluido en la página 13
Hardware Setup 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ In order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch the contact pins with fingers or any object. 3. Always put on the cap when the CPU is not in use. 1.7.1 CPU Socket 775 ※ The installatio
Resumen del contenido incluido en la página 14
5. Use your left hand to hold the load plate, 8. Place the heatsink and fan assembly onto and use your right thumb to peel the cap off. the socket. Align the four fasteners toward the four mounting holes on the motherboard. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 9. Press each of the four fasteners down into the mounting holes. Rotate the fastener clock-wise to lock the heatsink and fan
Resumen del contenido incluido en la página 15
Hardware Setup 1.7.2 DDR2 Memory Slots To reach the optimum performance in dual-channel configurations, install identical DDR2 DIMM pairs for each channel. Install DIMMs with the same CAS latency. To reach the optimum compatibility, obtain memory modules from the same vendor. ※ Usually there is no hardware or BIOS setup required after adding or removing memory modules, but you will have to clear the CMOS memory first if any memory module related problem occurs. To instal
Resumen del contenido incluido en la página 16
1.7.3 PCI Express X16 Add-on Slots These slots support the connections of graphics cards that comply with PCI Express specifications. This motherboard provides dual PCI-Express X16 slots for one or two graphics cards installation: One PCIE graphics card installation (Normal Mode): Install one PCIE graphics card into [Master] slot (the PCIEX1 slot on this motherboard). Two PCIE graphics cards installation (CrossFire Mode): ™ Install one CrossFire Edition graphics card into [Maste
Resumen del contenido incluido en la página 17
Hardware Setup 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the floppy disk drives connector. Generally you need only one floppy disk drive in your system. ※ The red line on the ribbon cable must be aligned with pin-1 on both the
Resumen del contenido incluido en la página 18
1.8.2 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by SATA cable. To connect SATA device: 1. Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device. 2. Attach the SATA power cable to the SATA device and connect the other end from the power supply. ※ The motherboard in this illustration is served for DEMO only, may not be the same type or model as the one descr
Resumen del contenido incluido en la página 19
Hardware Setup 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x additional USB 2.0 ports by connecting bracket or cable to the rear I/O panel or the front-mounted USB ports of your chassis. Pin Pin Assignment Pin Pin Assignment 1 VCC 2 VCC 3 Data0 - 4 Data1 - 5 Data0 + 6 Data1 + 7 Ground 8 Ground 10 NC ※ Make sure the connecting cable bears the same pin assignment. 1.8.4 Internal Audio Connectors This connector connects to the audio output of internal CD-R
Resumen del contenido incluido en la página 20
1.8.5 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis. To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at pin 5-6, and pin 9-10 (default setting). Pin Signal Name Function 1 AUD_MIC Front Panel Microphone i
